EFFECTS // ROBLOX STUDIO
How to make an explosion in Roblox Studio
Use two ParticleEmitters in Roblox Studio to play an explosion that plays once, a ground fireball or a shell impact, one for smoke and one for the glowing flame. Upload your 1024 px, 64-frame textures to each emitter, set FlipbookLayout to Grid8x8 and set FlipbookMode to OneShot.
- Godot 4 Available
- Unity Manual setup
- Unreal Engine Manual setup
- Roblox Studio Manual setup
- three.js Available
A draft compile is from $0.05, and new accounts start with $5 of usage.
01 // WHAT YOU GET
What you get for explosion in Roblox Studio
Two explosion examples cover the common cases. The fireball bursts from the ground and rolls upward for 3.7 seconds, about 9.4 m wide and 13.4 m tall at its peak. The impact is a shell hitting dry ground: a flash, thrown earth and a little smoke in 2 seconds, about 3.5 m across.
Each compile is four 2048 px PNG sheets of 64 frames on an 8 x 8 grid, a layout.json with the timing, and previews. The sheets carry lighting from six directions and the flame separately, not one painted color image, so for Roblox Studio you turn them into one image per ParticleEmitter: a smoke texture and, for flame, a second one on black.
02 // BY HAND TODAY
Set up the explosion in Roblox Studio by hand
- Ask your agent for the effect (for example "a car explosion about 6 m tall that plays once") with
export.tile_px = 128, so each 8 x 8 sheet is 1024 x 1024 px, the largest image Roblox keeps. Also ask forexport.pacing = "even": OneShot spaces the frames evenly over Lifetime, and the example spends more frames on its fast start. - A ParticleEmitter takes one texture, so pack the smoke into one image: ask for
export.packto write the light from above (green ofmain_pos.png) into RGB and opacity (alpha ofmain_pos.png) into alpha. For the flame, make a second image on black:main_colour.pngtimes the squared alpha ofmain_neg.png, normalized to the clip's peak (how and why). - Upload each image in the Asset Manager and paste its id into the Texture of its own ParticleEmitter, both on one Attachment in the same part.
- Set FlipbookLayout to Grid8x8 on both emitters and FlipbookMode to OneShot with Lifetime 4 and Rate 0, then call
Emit(1)on both emitters when the explosion happens, from the same script call and with identical fixed settings (layer alignment). - Flame emitter: LightEmission 1, LightInfluence 0, Brightness
scales.emit_max_hdr. Smoke emitter: LightEmission 0, LightInfluence 1. Set Size on both emitters to the meters per tile inlayout.jsonconverted to studs, a little over 48 studs for the explosion.
03 // REAL OUTPUT
Compare the explosion examples
These clips are final-quality compiles of the shipped examples, played from their own sheets. Your agent can start from any of them.
04 // ADJUST IT
Adjust the explosion for your scene
Use the fireball for vehicles, barrels and big set pieces, and the impact for shells, grenades and anything that hits the ground. Ask your agent for a smaller burst, more smoke after the flash, or a few seeds so repeated explosions do not look identical.
Both end once the effect has faded, so the last frame is empty and the effect can be removed without a pop.
05 // WHICH ONE
Pick a explosion example
How do I get an explosion effect for Roblox Studio?
Start from fireball or impact and ask your agent for a car explosion about 6 m tall that plays once. Play the compiled textures in Roblox Studio.
How do I import an explosion flipbook texture into Roblox Studio?
Upload two 1024 x 1024 PNGs, one for smoke with opacity in alpha and one for flame on black, then paste each id into its ParticleEmitter Texture.
How do I randomize the starting frame of Roblox explosion particles?
Leave FlipbookStartRandom off on both emitters when flame and smoke are separate so they stay in sync and stagger paired Emit(1) calls instead.
How do I make the Roblox explosion flame glow with LightEmission and Brightness?
Put the flame on its own emitter using main_colour.png times squared main_neg.png alpha on black, then set Brightness to scales.emit_max_hdr, LightEmission 1 and LightInfluence 0.
How many frames does the Roblox Studio explosion effect use?
The explosion compile uses 64 frames over a 4 s clip and gives more frames to the fast burst at the start before ending cleanly.
Compile your first effect
You pay per compile and see the price before it runs. New accounts start with $5 of usage.