DOCS // pyrofx

pyrofx examples

The hosted pyrofx recipes are fire, fireball, fire_whirl, window_fire, smoke_column, smoke_plume, dust_ring, impact, kickup_soil and kickup_masonry. The rendered starter library retains its recorded compile version; each example links its report.

Contents61 sections
  1. Compile a longer smoke column
  2. Index
  3. Starters
  4. Explosions
  5. Fire
  6. Smoke
  7. Impact and dust
  8. Environmental
  9. Stylized
  10. Fireball
  11. Impact
  12. Smoke column
  13. Fire
  14. Fire whirl
  15. Window fire
  16. Smoke plume
  17. Dust ring
  18. Explosions
  19. Staged fuel explosion
  20. Chain detonation
  21. Airburst
  22. Vehicle cook-off
  23. Wall breach
  24. Incendiary strike line
  25. Rising cap burst
  26. Fire
  27. Wreck fire with hull
  28. Spreading ground fire
  29. Gas flare stack
  30. Campfire on logs
  31. House fire, two windows
  32. Jet fire leak
  33. Smoke
  34. Chimney in shifting wind
  35. Smoke through a pipe
  36. Smoke under a sliding slab
  37. Signal smoke puffs
  38. Sheared blast column
  39. Vortex smoke loft
  40. Impact and dust
  41. Mortar crater
  42. Dropship landing
  43. Collapse dust surge
  44. Strafing dust line
  45. Meteor strike
  46. Mech footfall
  47. Environmental
  48. Steam under a hull
  49. Courtyard smoke
  50. Canyon wind plume
  51. Doorway smoke
  52. Fan pulling a plume
  53. Rooftop vents in wind
  54. Stylized
  55. Cold blue fire
  56. Alchemical cauldron
  57. Ember brazier
  58. Violet portal swirl
  59. Shadow flame
  60. Spirit wisp trail
  61. Questions

Compile a longer smoke column

Start with smoke_column.pyro.toml and update its export section for a 6-second clip at 60 fps, packing 360 frames across six 2048 px sheets per channel.

[export]
pacing = "even"
output_fps = 60
sheet_px = 2048

Index

Starters

You wantStart fromKindWidth x heightLife
A fuel explosion that bursts from the ground and rolls upward.fireballone-shot9.4 x 13.4 m3.7 s
A shell hitting dry ground: flash, thrown earth, a little smoke. Three emitters in one box.impactone-shot3.5 x 2.8 m2.0 s
Smoke left after a burst. It climbs, spreads and thins.smoke_columnone-shot8.2 x 9.9 m5.0 s
A steady fire about 1.5 m across, like a burning wreck.fireloop4.1 x 7.0 m2 s loop
Flames spun into a tall column by a vortex force.fire_whirlloop4.4 x 7.1 m2 s loop
A burning room venting flame and smoke through a window. Three obstacles make the building.window_fireloop3.9 x 4.7 m2 s loop
Chimney or wreck smoke leaning with the wind.smoke_plumeloop7.0 x 10.8 m4 s loop
A ring of dust kicked out by a blast or landing.dust_ringone-shot10.5 x 2.2 m2.1 s

Sizes for the official examples are maximums from the baked result. Library sizes are the spec box. To resize, scale domain.size_m, domain.voxel_m, emitter position_m, size_m, velocity_mps and solver.turbulence_size_m together.

Explosions

You wantStart fromKindWidth x heightLife
A fuel depot going up in stages: flash, main fireball, a second tank half a second later, a dust skirt and hanging smoke.staged_fuel_explosionone-shot16 x 18 m6 s
Four charges along a line, a fifth of a second apart, each with its own short shock.chain_detonationone-shot20 x 12 m5 s
A shell bursting high in the air with a dark smoke shell. A second view looks up at it from the ground.airburstone-shot14 x 16 m4.5 s
A blast out of a vehicle hatch, then a deck fire that catches, burns and starves. The hull and turret are obstacles, so a model can fill the hole.vehicle_cookoffone-shot10 x 12 m8 s
A breaching charge behind a wall, venting through a carved doorway toward the camera, with dust off the frame and a short jet.wall_breachone-shot10 x 8 m3.5 s
A fast moving source that lays an unbroken wall of fire along a road, which burns off into a low line of smoke.incendiary_strike_lineone-shot18 x 10 m5 s
A very large burst that rises as a cap on a stem of gathered dust, with a ground ring.rising_cap_burstone-shot16 x 24 m7 s

Fire

You wantStart fromKindWidth x heightLife
Deck flames and a fuel pool burning around a wrecked hull, leaning with a light wind. The hull and turret are obstacles.wreck_fire_hullloop8 x 10 m2 s loop
A fire front running 12 m along the ground, with a smoldering strip that grows behind it. A second view looks down from above.spreading_ground_fireone-shot16 x 8 m8 s
A flare at the top of a tall stack, bent by the wind and torn by gusts. The stack is a carved cylinder.gas_flare_stackloop8 x 14 m2 s loop
A campfire on three crossed logs, with small tongues licking along each one.campfire_logsloop3 x 4.5 m2 s loop
A ground floor room fire rolling out of two windows and up the front, past a dark upper window.two_window_house_fireloop6 x 9 m2 s loop
Burning gas jetting sideways from a broken pipe, flapping as it slows.jet_fire_leakloop10 x 7 m2 s loop

Smoke

You wantStart fromKindWidth x heightLife
Chimney smoke while the wind picks up, swings round and drops, so the plume leans one way and then another. A second view looks down from above.chimney_shifting_windone-shot14 x 16 m9 s
Smoke pushed along a pipe bore by a fan and out of the open end, where it rises. The emitter sits inside the carved bore.pipe_vent_smokeloop10 x 8 m3 s loop
A low smoke pool pushed and dragged by a solid sliding over it, as under a hover vehicle or a closing blast door.smoke_under_sliding_slabone-shot12 x 6 m5 s
Red signal smoke from a canister in four puffs, switched on and off with step keys and carried off by a light wind.signal_smoke_puffsone-shot8 x 12 m8 s
The smoke column after a blast, bent off at its head by wind that picks up aloft after a second and a half.sheared_blast_columnone-shot16 x 18 m7 s
Smoke and dust drawn off a burnt field into a slow spinning column by a vortex and a pull at its foot.vortex_smoke_loftloop8 x 14 m3 s loop

Impact and dust

You wantStart fromKindWidth x heightLife
A heavy mortar round on dirt: flash, earth cone, fast skirt, slower rolling rim and a short shock.mortar_craterone-shot10 x 8 m3.5 s
A hull settling to the ground while its downwash blasts a ring of dust outward. The hull is a moving obstacle.dropship_landingone-shot16 x 8 m6 s
A building sinking into the ground in a surge of dust from its foot and its roof. The block is a moving obstacle.collapse_dust_surgeone-shot14 x 9 m6 s
Six dust spouts walking along the ground a tenth of a second apart.strafing_dust_lineone-shot16 x 5 m2.5 s
A burning body streaking down at a steep angle and striking the ground: trail, flash, thrown earth, dust ring and shock.meteor_strikeone-shot14 x 12 m4.5 s
A giant walker's foot coming down on dry ground and throwing a ring of dust at the moment it lands.mech_footfallone-shot10 x 6 m3 s

Environmental

You wantStart fromKindWidth x heightLife
Steam from floor vents hitting the curved underside of a ship's hull, running along it and spilling past the sides.steam_under_hullloop12 x 7 m3 s loop
Smoke pooling in a walled courtyard and spilling over the downwind wall where a breeze crosses the top.courtyard_smokeloop12 x 12 m4 s loop
A plume streaming along a canyon between two cliffs. The near cliff has holdout off, so the side view sees through it.canyon_wind_plumeloop16 x 10 m4 s loop
Smoke from a smoldering room leaking out of the top of its doorway and climbing the wall. The building holds out the room.doorway_smoke_holdoutloop8 x 6 m3 s loop
A plume drawn sideways into a big extraction fan with two spinning blades and a push through its shroud.fan_pulled_plumeloop10 x 8 m3 s loop
Exhaust from three roof vents, fed by one points emitter, streaming off in a gusty crosswind.rooftop_vents_windloop12 x 8 m3 s loop

Stylized

You wantStart fromKindWidth x heightLife
A blue flame ramp with a slow curl, for a frost spell or a spirit flame. The flame is ordinary burning gas with a different color ramp.cold_blue_fireloop5 x 7 m2 s loop
Low green flames over a cauldron and a heavy green vapor, made of dust, pouring over the rim and across the floor.alchemical_cauldronloop5 x 6 m2 s loop
Low, ember-warm fire in a brazier bowl: a deep red to amber ramp and strong glow in the smoke above it.ember_brazierloop3 x 4.5 m2 s loop
An upright ring of violet flame swirled about its center by a vortex, for a portal or a summoning circle.violet_portal_swirlloop6 x 6 m2 s loop
A dark, sooty flame with a deep red ramp and black smoke hanging in a hood above it, held by a drag pocket.shadow_flameloop5 x 7 m2 s loop
A small teal flame weaving on an eased path and leaving a fading trail of gas, not particles.spirit_wisp_trailone-shot10 x 7 m6.5 s

Fireball fireball.pyro.toml

A fuel explosion that bursts from the ground and rolls upward. One-shot, up to 9.4 x 13.4 m, 3.7 s.

final quality · compiled with Spatial Compiler · Bake summary

fireball.pyro.toml
# A ground burst that swells, rolls and rises. One-shot.
[meta]
name = "fireball"
notes = "Ground burst that swells, rolls and rises"

[domain]
size_m = [12, 16, 12]
voxel_m = 0.08
duration_s = 4.0

[[emitters]]
shape = "sphere"
position_m = [0, 0.7, 0]
size_m = 1.2
start_s = 0.0
end_s = 0.18
fuel = 5
temperature_k = 1900
smoke = 1.5
velocity_mps = 7

[solver]
# Burning needs air, so the ball burns at its rolling surface instead of all at once.
air_limit = 0.88
burn_rate = 10
smoke_fade = 1.1

[look]
exposure = 1.2

[export]
pacing = "front"

Impact impact.pyro.toml

A shell hitting dry ground: flash, thrown earth, a little smoke. Three emitters in one box. One-shot, up to 3.5 x 2.8 m, 2.0 s.

final quality · compiled with Spatial Compiler · Bake summary

impact.pyro.toml
# A shell hitting dry ground: a brief flash, earth thrown up and outward, a little smoke. One-shot.
# Three emitters in one box: the flash is hot and short; the dust is cold, so it falls back.
[meta]
name = "impact"
notes = "Mortar or tank shell impact on dry ground, about 4 m wide"

[domain]
size_m = [9, 8, 9]
voxel_m = 0.05
duration_s = 3.2
substeps = 3

# The flash. Little fuel and a short burn, so its heat does not carry the dust up as a column.
[[emitters]]
shape = "sphere"
position_m = [0, 0.3, 0]
size_m = 0.4
start_s = 0.0
end_s = 0.06
fuel = 3
temperature_k = 1900
smoke = 2.0
velocity_mps = 6
direction = "radial"

# Earth thrown up and outward in a wide cone.
[[emitters]]
shape = "sphere"
position_m = [0, 0.25, 0]
size_m = 0.4
start_s = 0.0
end_s = 0.15
fuel = 0
temperature_k = 293
dust = 12
velocity_mps = 11
direction = "up"
spread_deg = 120
jitter = 0.6

# The skirt thrown outward along the ground.
[[emitters]]
shape = "ring"
position_m = [0, 0.2, 0]
size_m = 0.5
start_s = 0.0
end_s = 0.12
fuel = 0
temperature_k = 293
dust = 10
velocity_mps = 8
direction = "radial"
jitter = 0.6

[solver]
burn_rate = 30
cooling = 8
air_limit = 0.5
buoyancy = 0.3
smoke_fade = 1.4
swirl = 0.6
turbulence = 0.5
turbulence_size_m = 0.4
turbulence_where = "moving"
drag = 0.9

[look]
exposure = 2.5
smoke_colour = [0.05, 0.05, 0.05]   # colours are linear light: 0.2 already shows as mid grey
dust_colour = [0.13, 0.09, 0.055]   # dark dry earth

[export]
pacing = "front"

Smoke column smoke_column.pyro.toml

Smoke left after a burst. It climbs, spreads and thins. One-shot, up to 8.2 x 9.9 m, 5.0 s.

final quality · compiled with Spatial Compiler · Bake summary

smoke_column.pyro.toml
# A burst of dark smoke that climbs, spreads and thins away. One-shot.
[meta]
name = "smoke_column"
notes = "Smoke burst that climbs and thins away"

[domain]
size_m = [14, 20, 14]
voxel_m = 0.1
duration_s = 6.0

[[emitters]]
shape = "sphere"
position_m = [0, 0.8, 0]
size_m = 1.0
start_s = 0.0
end_s = 0.8
fuel = 0
temperature_k = 700
smoke = 6
velocity_mps = 3
direction = "up"
spread_deg = 50
jitter = 0.5

[solver]
cooling = 0.3
smoke_fade = 0.75
swirl = 0.7
turbulence = 0.5
turbulence_size_m = 1.2
turbulence_where = "moving"

[export]
pacing = "front"
channels = ["six_way", "motion", "depth"]

Fire fire.pyro.toml

A steady fire about 1.5 m across, like a burning wreck. Loop, up to 4.1 x 7.0 m, 2 s loop.

final quality · compiled with Spatial Compiler · Bake summary

fire.pyro.toml
# A steady fire about a metre and a half across. Loops.
[meta]
name = "fire"
notes = "Steady ground fire, looping"

[domain]
# 8 m deep: at 6 m faint gas reached the +z face from frame 9 (DOMAIN_CLIPPING at final quality).
size_m = [6, 8, 8]
voxel_m = 0.05
duration_s = 2.0

[[emitters]]
shape = "disc"
position_m = [0, 0.15, 0]
size_m = 0.7
start_s = 0.0
end_s = 1000
fuel = 6
temperature_k = 1500
smoke = 0.2
velocity_mps = 1.5
direction = "up"
spread_deg = 25
jitter = 0.6

[solver]
# Burning needs air, so the flames lick up the outside of the fuel instead of filling it.
air_limit = 0.88
burn_rate = 12
# Drag stands in for the air a real fire pulls in, which slows the column; the smoke is gone before the box top.
cooling = 2.5
soot = 0.35
smoke_fade = 4.5
drag = 1.5
swirl = 0.8
turbulence = 0.7
turbulence_size_m = 0.5

[look]
exposure = 2.6
smoke_density = 0.6

[export]
loop = true
loop_blend_frames = 12
warmup_s = 2.5

Fire whirl fire_whirl.pyro.toml

Flames spun into a tall column by a vortex force. Loop, up to 4.4 x 7.1 m, 2 s loop.

final quality · compiled with Spatial Compiler · Bake summary

fire_whirl.pyro.toml
# A fire spun into a tall, narrow column by a vortex along its axis. Loops.
[meta]
name = "fire_whirl"
notes = "Fire whirl: a ground fire inside a spinning column, looping"

[domain]
size_m = [7, 10, 7]
substeps = 2
voxel_m = 0.05
duration_s = 2.0

[[emitters]]
shape = "disc"
position_m = [0, 0.15, 0]
size_m = 0.7
start_s = 0.0
end_s = 1000
fuel = 6
temperature_k = 1500
smoke = 0.2
velocity_mps = 1.5
direction = "up"
spread_deg = 25
jitter = 0.6

# The spin: around the vertical axis, up the whole column, on air and gas alike.
[[forces]]
kind = "vortex"
shape = "box"
position_m = [0, 4, 0]
size_m = [1.3, 4, 1.3]
direction = [0, 1, 0]
strength = 14
max_speed_mps = 4
falloff = 0.4

# Air drawn in at the foot, which is what keeps a real whirl narrow.
[[forces]]
kind = "point"
position_m = [0, 1.2, 0]
size_m = 2.0
strength = -6
falloff = 0.6

[solver]
air_limit = 0.88
burn_rate = 12
cooling = 2.5
soot = 0.35
smoke_fade = 8
drag = 1.5
swirl = 0.8
turbulence = 0.5
turbulence_size_m = 0.5

[look]
exposure = 2.6
smoke_density = 0.6

[export]
loop = true
loop_blend_frames = 12
warmup_s = 3.0

Window fire window_fire.pyro.toml

A burning room venting flame and smoke through a window. Three obstacles make the building. Loop, up to 3.9 x 4.7 m, 2 s loop.

final quality · compiled with Spatial Compiler · Bake summary

window_fire.pyro.toml
# A room on fire behind a wall: flame and smoke pour out of the window and climb the wall. Loops.
# The building is three obstacles: a block, the room carved out of it, the window carved through
# its front. The camera looks at the front of the wall; what burns inside shows only through the
# window, because the block holds out the gas behind it.
[meta]
name = "window_fire"
notes = "Fire venting from a window and up the wall above it, looping"

[domain]
size_m = [5, 8, 5]
voxel_m = 0.05
duration_s = 2.0

# The building: fills the back of the box from the floor to the top. Its front is at Z = -0.5,
# which leaves 3 m of open air in front for the flame to roll out into.
[[obstacles]]
shape = "box"
position_m = [0, 4, -1.5]
size_m = [2.5, 4, 1.0]

# The room inside it, with a wall 0.2 m thick in front.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 1.3, -1.5]
size_m = [1.3, 1.1, 0.8]

# The window through that wall.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 1.5, -0.6]
size_m = [0.7, 0.65, 0.25]

# The fire on the floor of the room, behind the window. It is kept clear of the wall: an emitter
# fills its whole shape, so one that pokes through a wall also burns on the far side of it.
[[emitters]]
shape = "disc"
position_m = [0, 0.4, -1.3]
size_m = 0.5
start_s = 0.0
end_s = 1000
fuel = 9
temperature_k = 1500
smoke = 0.3
velocity_mps = 1.0
direction = "up"
spread_deg = 30
jitter = 0.6

[solver]
air_limit = 0.6
burn_rate = 12
# Burning in a closed room pushes the gas out of its one opening. At 1 it leaves as a level jet
# 3 m long; at 0.8 it rolls out of the window and climbs the wall.
expansion = 0.8
cooling = 1.5
soot = 0.5
smoke_fade = 3.5
drag = 1.5
swirl = 0.8
turbulence = 0.7
turbulence_size_m = 0.5

[look]
exposure = 2.0
smoke_density = 0.8

[export]
loop = true
loop_blend_frames = 12
warmup_s = 4.0

Smoke plume smoke_plume.pyro.toml

Chimney or wreck smoke leaning with the wind. Loop, up to 7.0 x 10.8 m, 4 s loop.

final quality · compiled with Spatial Compiler · Bake summary

smoke_plume.pyro.toml
# Dark smoke rising from a wreck and leaning with the wind. Loops.
[meta]
name = "smoke_plume"
notes = "Wreck smoke leaning downwind, looping"

[domain]
size_m = [14, 18, 13]
voxel_m = 0.1
duration_s = 4.0

[[emitters]]
shape = "disc"
position_m = [-3, 0.3, 0]
size_m = 0.8
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 520
smoke = 5
velocity_mps = 1.5
direction = "up"
spread_deg = 30
jitter = 0.5

[solver]
cooling = 0.25
smoke_fade = 0.45
swirl = 0.8
turbulence = 0.2
turbulence_size_m = 1.2
turbulence_where = "moving"
wind_mps = [1.2, 0, 0]
drag = 0.3

[export]
loop = true
loop_blend_frames = 12
warmup_s = 6.0
channels = ["six_way", "motion", "depth"]

Dust ring dust_ring.pyro.toml

A ring of dust kicked out by a blast or landing. One-shot, up to 10.5 x 2.2 m, 2.1 s.

final quality · compiled with Spatial Compiler · Bake summary

dust_ring.pyro.toml
# The ring of dust a blast kicks out along the ground. One-shot.
[meta]
name = "dust_ring"
notes = "Ground dust thrown outward by a blast"

[domain]
size_m = [20, 5, 20]
voxel_m = 0.1
duration_s = 3.0

[[emitters]]
shape = "ring"
position_m = [0, 0.3, 0]
size_m = 1.5
start_s = 0.0
end_s = 0.15
fuel = 0
temperature_k = 293
smoke = 0
dust = 12
velocity_mps = 14
direction = "radial"
jitter = 0.6

[solver]
buoyancy = 0.4
smoke_fade = 1.4
swirl = 0.5
turbulence = 0.6
turbulence_size_m = 0.6
turbulence_where = "moving"
drag = 0.8

[[views]]
name = "main"
pitch_deg = 35

[export]
pacing = "front"
channels = ["six_way", "motion", "depth"]

Explosions

Staged fuel explosion staged_fuel_explosion.pyro.toml

A fuel depot going up in stages: flash, main fireball, a second tank half a second later, a dust skirt and hanging smoke. One-shot, up to 16 x 18 m, 6 s.

final quality · compiled with Spatial Compiler · Bake summary

staged_fuel_explosion.pyro.toml
# A fuel depot going up in stages: a white flash, the main fireball swelling, a second tank bursting
# half a second later off to one side, a dust skirt along the ground and smoke left hanging. One-shot.
[meta]
name = "staged_fuel_explosion"
notes = "Multi-stage fuel explosion: flash, main fireball, secondary burst, dust skirt, lingering smoke"

[domain]
size_m = [16, 18, 16]
voxel_m = 0.1
duration_s = 6.0
substeps = 3

# Stage 1: the flash. Small, very hot, gone in a twentieth of a second.
[[emitters]]
shape = "sphere"
position_m = [0, 0.6, 0]
size_m = 0.6
start_s = 0.0
end_s = 0.05
fuel = 3
temperature_k = 2400
velocity_mps = 9
lumpiness = 0.2

# Stage 2: the main fireball. The fuel is keyed so the ball swells hard, then starves.
[[emitters]]
shape = "sphere"
position_m = [0, 0.9, 0]
size_m = 1.3
start_s = 0.02
end_s = 0.35
fuel = [[0.02, 6], [0.2, 4], [0.35, 0]]
temperature_k = 1900
smoke = 1.5
velocity_mps = 7
lumpiness = 0.6

# Stage 3: a second tank bursting off to one side, half a second later.
[[emitters]]
shape = "sphere"
position_m = [2.6, 0.7, 1.2]
size_m = 0.8
start_s = 0.5
end_s = 0.7
fuel = 4.5
temperature_k = 1850
smoke = 1.2
velocity_mps = 5.5
lumpiness = 0.7

# The dust skirt thrown out along the ground by the first shock.
[[emitters]]
shape = "ring"
position_m = [0, 0.25, 0]
size_m = 1.4
thickness_m = 0.2
start_s = 0.0
end_s = 0.12
fuel = 0
temperature_k = 293
dust = 10
velocity_mps = 13
direction = "radial"
jitter = 0.6

# The shock: a tenth of a second of expansion shoves the air outward.
[[forces]]
kind = "expand"
shape = "sphere"
position_m = [0, 0.8, 0]
size_m = 3.0
strength = [[0.0, 4.0], [0.1, 0.0]]
start_s = 0.0
end_s = 0.12

# A smaller shock for the second tank.
[[forces]]
kind = "expand"
shape = "sphere"
position_m = [2.6, 0.7, 1.2]
size_m = 1.8
strength = [[0.5, 3.0], [0.58, 0.0]]
start_s = 0.5
end_s = 0.6

[solver]
air_limit = 0.88
burn_rate = 10
expansion = 1.2
cooling = 1.2
smoke_fade = 0.9
swirl = 0.8
turbulence = 0.5
turbulence_size_m = 0.9

[look]
exposure = 1.3
smoke_colour = [0.05, 0.045, 0.04]
dust_colour = [0.15, 0.11, 0.07]

[[views]]
name = "side"

[[views]]
name = "strategy"
pitch_deg = 55

[export]
pacing = "front"

Chain detonation chain_detonation.pyro.toml

Four charges along a line, a fifth of a second apart, each with its own short shock. One-shot, up to 20 x 12 m, 5 s.

final quality · compiled with Spatial Compiler · Bake summary

chain_detonation.pyro.toml
# Four charges going off in a row, a fifth of a second apart, each with its own shock. One-shot.
# The charges sit along X, so the side view sees the whole line.
[meta]
name = "chain_detonation"
notes = "Four staggered charges along a line, each with a short shock"

[domain]
size_m = [20, 12, 10]
voxel_m = 0.08
duration_s = 5.0
substeps = 3

[[emitters]]
shape = "sphere"
position_m = [-6, 0.6, 0]
size_m = 0.7
start_s = 0.0
end_s = 0.12
fuel = 5
temperature_k = 1900
smoke = 1.2
dust = 3
velocity_mps = 7

[[emitters]]
shape = "sphere"
position_m = [-2, 0.6, 0.4]
size_m = 0.7
start_s = 0.2
end_s = 0.32
fuel = 5
temperature_k = 1900
smoke = 1.2
dust = 3
velocity_mps = 7

[[emitters]]
shape = "sphere"
position_m = [2, 0.6, -0.3]
size_m = 0.7
start_s = 0.4
end_s = 0.52
fuel = 5
temperature_k = 1900
smoke = 1.2
dust = 3
velocity_mps = 7

# The last charge is the largest.
[[emitters]]
shape = "sphere"
position_m = [6, 0.7, 0]
size_m = 0.9
start_s = 0.6
end_s = 0.76
fuel = 6
temperature_k = 1950
smoke = 1.5
dust = 4
velocity_mps = 8

[[forces]]
kind = "expand"
position_m = [-6, 0.6, 0]
size_m = 1.8
strength = 3.5
start_s = 0.0
end_s = 0.08

[[forces]]
kind = "expand"
position_m = [-2, 0.6, 0.4]
size_m = 1.8
strength = 3.5
start_s = 0.2
end_s = 0.28

[[forces]]
kind = "expand"
position_m = [2, 0.6, -0.3]
size_m = 1.8
strength = 3.5
start_s = 0.4
end_s = 0.48

[[forces]]
kind = "expand"
position_m = [6, 0.7, 0]
size_m = 2.2
strength = 4.0
start_s = 0.6
end_s = 0.7

[solver]
air_limit = 0.85
burn_rate = 12
cooling = 1.5
smoke_fade = 1.2
swirl = 0.7
turbulence = 0.5
turbulence_size_m = 0.7

[look]
exposure = 1.4
smoke_colour = [0.05, 0.05, 0.05]
dust_colour = [0.14, 0.1, 0.06]

[[views]]
name = "side"

[[views]]
name = "strategy"
pitch_deg = 55

[export]
pacing = "front"
# The last second only thins smoke; leave it out of the sheet.
end_s = 4.2

Airburst airburst.pyro.toml

A shell bursting high in the air with a dark smoke shell. A second view looks up at it from the ground. One-shot, up to 14 x 16 m, 4.5 s.

final quality · compiled with Spatial Compiler · Bake summary

airburst.pyro.toml
# A shell bursting high in the air: a flash, a ball of fire that swells fast and rolls, and a dark
# smoke shell left drifting. Nothing touches the ground. One-shot.
# A second view looks up at it from below, as a player on the ground would.
[meta]
name = "airburst"
notes = "High air burst with a smoke shell; side view and a low view looking up"

[domain]
size_m = [14, 16, 14]
voxel_m = 0.1
duration_s = 4.5

[[emitters]]
shape = "sphere"
position_m = [0, 8, 0]
size_m = 0.5
start_s = 0.0
end_s = 0.05
fuel = 3
temperature_k = 2400
velocity_mps = 10
lumpiness = 0.2

[[emitters]]
shape = "sphere"
position_m = [0, 8, 0]
size_m = 1.0
start_s = 0.0
end_s = 0.15
fuel = 5
temperature_k = 1900
smoke = 2.5
velocity_mps = 8
lumpiness = 0.7

# The blast wave clears the air around the burst.
[[forces]]
kind = "expand"
position_m = [0, 8, 0]
size_m = 2.5
strength = [[0.0, 5.0], [0.08, 0.0]]
start_s = 0.0
end_s = 0.1

[solver]
air_limit = 0.85
burn_rate = 14
# A burst of expansion while the fuel burns, then normal.
expansion = [[0, 2], [0.4, 1]]
cooling = 1.8
smoke_fade = 0.8
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.7

[look]
exposure = 1.5
smoke_colour = [0.03, 0.03, 0.03]

[[views]]
name = "side"

[[views]]
name = "below"
pitch_deg = -30

[export]
pacing = "front"

Vehicle cook-off vehicle_cookoff.pyro.toml

A blast out of a vehicle hatch, then a deck fire that catches, burns and starves. The hull and turret are obstacles, so a model can fill the hole. One-shot, up to 10 x 12 m, 8 s.

final quality · compiled with Spatial Compiler · Bake summary

vehicle_cookoff.pyro.toml
# A vehicle cooking off: a blast out of the top hatch, then a fire that settles on the deck and
# burns down. The hull and turret are obstacles, so the flame wraps the hull and the game's own
# model fills the hole they leave in the sheet. One-shot.
[meta]
name = "vehicle_cookoff"
notes = "Hatch blast, then a deck fire that burns down; hull and turret are obstacles"

[domain]
size_m = [10, 12, 10]
voxel_m = 0.07
duration_s = 8.0

# The hull, turned 15 degrees so the side view sees some of its length.
[[obstacles]]
shape = "box"
position_m = [0, 0.7, 0]
size_m = [1.6, 0.6, 0.9]
rotation_deg = [0, 15, 0]

# The turret.
[[obstacles]]
shape = "cylinder"
position_m = [0.6, 1.5, 0]
size_m = 0.5
height_m = 0.4

# The hatch blast, from just above the turret.
[[emitters]]
shape = "sphere"
position_m = [0.6, 2.1, 0]
size_m = 0.35
start_s = 0.0
end_s = 0.15
fuel = 6
temperature_k = 1950
smoke = 2.0
velocity_mps = 9
direction = "up"
spread_deg = 40

# The deck fire. It catches, burns steady, then starves.
[[emitters]]
shape = "disc"
position_m = [-0.7, 1.45, 0]
size_m = 0.55
thickness_m = 0.06
start_s = 0.3
end_s = 6.5
fuel = [[0.3, 0], [0.8, 6], [4, 5], [6.5, 0]]
temperature_k = 1500
smoke = [[0.3, 0.2], [4, 0.6], [6.5, 0]]
velocity_mps = 1.2
direction = "up"
spread_deg = 25
jitter = 0.6

[solver]
air_limit = 0.85
burn_rate = 12
cooling = 2.2
soot = 0.5
smoke_fade = 2.0
drag = 1.2
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.5
wind_mps = [0.6, 0, 0]

[look]
exposure = 2.2
smoke_density = 0.8

[export]
pacing = "front"

Wall breach wall_breach.pyro.toml

A breaching charge behind a wall, venting through a carved doorway toward the camera, with dust off the frame and a short jet. One-shot, up to 10 x 8 m, 3.5 s.

final quality · compiled with Spatial Compiler · Bake summary

wall_breach.pyro.toml
# A breaching charge behind a wall: the blast punches out through the doorway toward the camera,
# throwing dust, while the rest of the wall holds. One-shot.
# The wall spans the box, so the only way through is the carved doorway.
[meta]
name = "wall_breach"
notes = "Breach charge venting through a doorway; wall and doorway are obstacles"

[domain]
size_m = [10, 8, 10]
voxel_m = 0.06
duration_s = 3.5
substeps = 3

# The wall, from floor to ceiling, side to side.
[[obstacles]]
shape = "box"
position_m = [0, 4, 0]
size_m = [5, 4, 0.25]

# The doorway through it.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 1.1, 0]
size_m = [0.8, 1.1, 0.4]

# The charge, a metre behind the wall.
[[emitters]]
shape = "sphere"
position_m = [0, 1.0, -1.0]
size_m = 0.5
start_s = 0.0
end_s = 0.1
fuel = 6
temperature_k = 1950
smoke = 2.0
velocity_mps = 8

# Dust knocked off the frame of the doorway.
[[emitters]]
shape = "box"
position_m = [0, 1.1, 0.5]
size_m = [0.8, 1.0, 0.15]
start_s = 0.03
end_s = 0.2
fuel = 0
temperature_k = 293
dust = 9
velocity_mps = 7
direction = [0, 0.3, 1]
spread_deg = 40
jitter = 0.6

[[forces]]
kind = "expand"
position_m = [0, 1.0, -1.0]
size_m = 1.5
strength = 5.0
start_s = 0.0
end_s = 0.08

# The jet through the doorway, toward the camera.
[[forces]]
kind = "push"
shape = "box"
position_m = [0, 1.1, 0.8]
size_m = [1.0, 1.2, 0.8]
direction = [0, 0, 1]
strength = [[0.0, 60.0], [0.2, 0.0]]
max_speed_mps = 12
start_s = 0.0
end_s = 0.2

[solver]
air_limit = 0.8
burn_rate = 14
cooling = 2.5
buoyancy = 0.7
smoke_fade = 1.3
drag = 0.6
swirl = 0.7
turbulence = 0.5
turbulence_size_m = 0.5
turbulence_where = "moving"

[look]
exposure = 1.8
smoke_colour = [0.05, 0.05, 0.05]
dust_colour = [0.2, 0.18, 0.15]

[[views]]
name = "front"

[[views]]
name = "corner"
pitch_deg = 30
yaw_deg = 35

[export]
pacing = "front"

Incendiary strike line incendiary_strike_line.pyro.toml

A fast moving source that lays an unbroken wall of fire along a road, which burns off into a low line of smoke. One-shot, up to 18 x 10 m, 5 s.

final quality · compiled with Spatial Compiler · Bake summary

incendiary_strike_line.pyro.toml
# An incendiary run along a road: a source racing across the box leaves an unbroken wall of fire,
# which burns off into a low line of dirty smoke drifting with a light crosswind. One-shot.
# The emitter moves 15 m in 0.8 s; the gas it leaves behind is the trail.
[meta]
name = "incendiary_strike_line"
notes = "Fast moving source leaving a line of fire that burns off into smoke"

[domain]
size_m = [18, 10, 10]
voxel_m = 0.08
duration_s = 5.0

# The strike: a fast moving source that leaves its gas behind as a trail.
[[emitters]]
shape = "sphere"
position_m = [[0.0, -7.5, 0.5, 0], [0.8, 7.5, 0.5, 0]]
size_m = 0.5
start_s = 0.0
end_s = 0.8
fuel = 8
temperature_k = 1700
smoke = 0.5
velocity_mps = 2
direction = "up"
spread_deg = 60
inherit_velocity = 0.15
lumpiness = 0.7

# Smoke from what is left burning along the line.
[[emitters]]
shape = "box"
position_m = [0, 0.2, 0]
size_m = [7.5, 0.12, 0.4]
start_s = 0.9
end_s = 3.0
fuel = 0
temperature_k = 650
smoke = [[0.9, 2], [3, 0]]
velocity_mps = 0.6
direction = "up"
spread_deg = 30

[solver]
air_limit = 0.85
burn_rate = 9
cooling = 1.6
soot = 0.8
smoke_fade = 1.0
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.6
wind_mps = [0, 0, 0.8]

[look]
exposure = 1.6

[[views]]
name = "side"

[[views]]
name = "strategy"
pitch_deg = 55

[export]
pacing = "front"

Rising cap burst rising_cap_burst.pyro.toml

A very large burst that rises as a cap on a stem of gathered dust, with a ground ring. One-shot, up to 16 x 24 m, 7 s.

final quality · compiled with Spatial Compiler · Bake summary

rising_cap_burst.pyro.toml
# A very large burst that rises as a cap on a stem of dust: the fireball lifts hard, a pull at its
# foot draws the ground dust in and up behind it, and a dust ring races out along the ground. One-shot.
[meta]
name = "rising_cap_burst"
notes = "Large burst rising as a cap on a dust stem, with a ground ring"

[domain]
size_m = [16, 24, 16]
voxel_m = 0.11
duration_s = 7.0
substeps = 3

[[emitters]]
shape = "sphere"
position_m = [0, 1.4, 0]
size_m = 1.6
start_s = 0.0
end_s = 0.3
fuel = 6
temperature_k = 2000
smoke = 2.0
velocity_mps = 7
lumpiness = 0.6

# Dust thrown up by the blast, which the pull at the foot gathers into a stem.
[[emitters]]
shape = "disc"
position_m = [0, 0.2, 0]
size_m = 2.5
thickness_m = 0.12
start_s = 0.05
end_s = 1.2
fuel = 0
temperature_k = 293
dust = 4
velocity_mps = 2
direction = "up"
spread_deg = 30

# The ground ring.
[[emitters]]
shape = "ring"
position_m = [0, 0.3, 0]
size_m = 2.0
thickness_m = 0.25
start_s = 0.0
end_s = 0.15
fuel = 0
temperature_k = 293
dust = 12
velocity_mps = 15
direction = "radial"
jitter = 0.6

# Air and dust drawn in under the rising ball.
[[forces]]
kind = "point"
position_m = [0, 2.0, 0]
size_m = 3.5
strength = [[0.6, 0], [1.5, -6], [5, 0]]
acts_on = "gas"
start_s = 0.6
end_s = 5.0

[solver]
air_limit = 0.88
burn_rate = 9
# The ball lifts harder once it has swollen.
buoyancy = [[0, 1], [1, 1.8], [3, 1.2]]
expansion = 1.3
cooling = 0.9
smoke_fade = 0.7
swirl = 0.9
turbulence = 0.5
turbulence_size_m = 1.2

[look]
exposure = 1.2
smoke_colour = [0.05, 0.045, 0.04]
dust_colour = [0.16, 0.12, 0.08]

[[views]]
name = "side"

[[views]]
name = "strategy"
pitch_deg = 55

[export]
pacing = "front"
channels = ["six_way", "emissive", "motion", "depth", "temperature"]

Fire

Wreck fire with hull wreck_fire_hull.pyro.toml

Deck flames and a fuel pool burning around a wrecked hull, leaning with a light wind. The hull and turret are obstacles. Loop, up to 8 x 10 m, 2 s loop.

final quality · compiled with Spatial Compiler · Bake summary

wreck_fire_hull.pyro.toml
# A burning wreck: flames on the deck and a fuel pool burning beside the hull, leaning with a light
# wind. The hull and turret are obstacles, so the fire wraps around them and leaves a clean hole in
# the sheet for the game's own model. Loops.
[meta]
name = "wreck_fire_hull"
notes = "Deck fire and fuel pool fire around a wrecked hull, leaning with wind, looping"

[domain]
size_m = [8, 10, 8]
voxel_m = 0.06
duration_s = 2.0

[[obstacles]]
shape = "box"
position_m = [0, 0.75, 0]
size_m = [1.8, 0.55, 0.9]
rotation_deg = [0, 20, 0]

[[obstacles]]
shape = "cylinder"
position_m = [0.8, 1.5, 0]
size_m = 0.5
height_m = 0.4

# Flames on the rear deck, clear of the turret.
[[emitters]]
shape = "disc"
position_m = [-0.4, 1.45, 0]
size_m = 0.6
thickness_m = 0.06
start_s = 0.0
end_s = 1000
fuel = 6
temperature_k = 1500
smoke = 0.4
velocity_mps = 1.2
direction = "up"
spread_deg = 25
jitter = 0.6

# Fuel pooled on the ground in front of the hull.
[[emitters]]
shape = "disc"
position_m = [0, 0.12, 1.8]
size_m = 0.5
thickness_m = 0.05
start_s = 0.0
end_s = 1000
fuel = 5
temperature_k = 1450
smoke = 0.3
velocity_mps = 1.0
direction = "up"
spread_deg = 25
jitter = 0.6

[solver]
air_limit = 0.88
burn_rate = 12
cooling = 2.5
soot = 0.5
smoke_fade = 3.5
drag = 1.5
swirl = 0.8
turbulence = 0.7
turbulence_size_m = 0.5
wind_mps = [0.8, 0, 0]

[look]
exposure = 2.4
smoke_density = 0.7

[export]
loop = true
loop_blend_frames = 12
warmup_s = 3.0

Spreading ground fire spreading_ground_fire.pyro.toml

A fire front running 12 m along the ground, with a smoldering strip that grows behind it. A second view looks down from above. One-shot, up to 16 x 8 m, 8 s.

final quality · compiled with Spatial Compiler · Bake summary

spreading_ground_fire.pyro.toml
# A grass fire running along the ground: the fire front moves 12 m in 5 s and the burnt strip behind
# it keeps smoldering, a smoke box that grows to follow the front. One-shot.
# The strategy view shows the burnt strip best.
[meta]
name = "spreading_ground_fire"
notes = "A moving fire front with a smoldering strip that grows behind it"

[domain]
size_m = [16, 8, 8]
voxel_m = 0.07
duration_s = 8.0

# The fire front.
[[emitters]]
shape = "disc"
position_m = [[0.0, -6, 0.15, 0], [5.0, 6, 0.15, 0]]
size_m = 0.6
thickness_m = 0.05
start_s = 0.0
end_s = 5.0
fuel = 6
temperature_k = 1500
smoke = 0.4
velocity_mps = 1.2
direction = "up"
spread_deg = 25
jitter = 0.6

# The strip behind the front, smoldering: its centre and its half-length grow as the front moves.
[[emitters]]
shape = "box"
position_m = [[0.0, -6, 0.1, 0], [5.0, 0, 0.1, 0]]
size_m = [[0.0, 0.05, 0.05, 0.5], [5.0, 6, 0.05, 0.5]]
start_s = 0.3
end_s = 7.0
fuel = 0
temperature_k = 650
smoke = [[0.3, 1.5], [5, 1.5], [7, 0]]
velocity_mps = 0.4
direction = "up"
spread_deg = 40

[solver]
air_limit = 0.88
burn_rate = 12
cooling = 2.5
soot = 0.4
smoke_fade = 1.4
drag = 1.0
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.5
wind_mps = [0.6, 0, 0]

[look]
exposure = 2.4
smoke_colour = [0.07, 0.065, 0.06]

[[views]]
name = "side"

[[views]]
name = "strategy"
pitch_deg = 55

Gas flare stack gas_flare_stack.pyro.toml

A flare at the top of a tall stack, bent by the wind and torn by gusts. The stack is a carved cylinder. Loop, up to 8 x 14 m, 2 s loop.

final quality · compiled with Spatial Compiler · Bake summary

gas_flare_stack.pyro.toml
# A gas flare burning at the top of a tall stack, torn by gusts and bent by the wind. The stack is a
# cylinder with its bore carved out, so the gas could also be fed up the inside. Loops.
[meta]
name = "gas_flare_stack"
notes = "Flare on a tall stack, bent by wind and gusts, looping"

[domain]
size_m = [8, 14, 8]
voxel_m = 0.07
duration_s = 2.0
substeps = 3

[[obstacles]]
shape = "cylinder"
position_m = [-1.5, 4, 0]
size_m = 0.35
height_m = 8

# The bore.
[[obstacles]]
shape = "cylinder"
carve = true
position_m = [-1.5, 4.1, 0]
size_m = 0.22
height_m = 8.2

# The flare, just above the lip of the stack.
[[emitters]]
shape = "disc"
position_m = [-1.5, 8.25, 0]
size_m = 0.3
thickness_m = 0.06
start_s = 0.0
end_s = 1000
fuel = 10
temperature_k = 1600
smoke = 0.15
velocity_mps = 4
direction = "up"
spread_deg = 10
jitter = 0.5

# Gusts around the flame.
[[forces]]
kind = "turbulence"
position_m = [-0.5, 9.5, 0]
size_m = 2.0
strength = 8
noise_size_m = 0.6
acts_on = "gas"

[solver]
air_limit = 0.8
burn_rate = 10
cooling = 2.2
soot = 0.2
smoke_fade = 4.0
drag = 0.8
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.5
wind_mps = [2.2, 0, 0]

[look]
exposure = 2.0

[[views]]
name = "side"

[[views]]
name = "strategy"
pitch_deg = 55

[export]
loop = true
loop_blend_frames = 12
warmup_s = 3.0

Campfire on logs campfire_logs.pyro.toml

A campfire on three crossed logs, with small tongues licking along each one. Loop, up to 3 x 4.5 m, 2 s loop.

final quality · compiled with Spatial Compiler · Bake summary

campfire_logs.pyro.toml
# A campfire on three crossed logs: a central flame and small tongues licking along each log. The logs
# are capsules laid flat and turned 60 degrees apart, so the flame flows around them. Loops.
# A small element: the sheet uses 192 px tiles and three times supersampling.
[meta]
name = "campfire_logs"
notes = "Campfire on three crossed logs, looping"

[domain]
size_m = [3, 4.5, 3]
voxel_m = 0.025
duration_s = 2.0

# Three logs, tipped onto their side (90 about X) and turned 0, 60 and 120 degrees about Y.
[[obstacles]]
shape = "capsule"
position_m = [0, 0.1, 0]
size_m = 0.08
height_m = 0.9
rotation_deg = [90, 0, 0]

[[obstacles]]
shape = "capsule"
position_m = [0, 0.1, 0]
size_m = 0.08
height_m = 0.9
rotation_deg = [90, 60, 0]

[[obstacles]]
shape = "capsule"
position_m = [0, 0.1, 0]
size_m = 0.08
height_m = 0.9
rotation_deg = [90, 120, 0]

# The main flame, above the crossing.
[[emitters]]
shape = "disc"
position_m = [0, 0.32, 0]
size_m = 0.22
thickness_m = 0.04
start_s = 0.0
end_s = 1000
fuel = 6
temperature_k = 1400
smoke = 0.15
velocity_mps = 0.8
direction = "up"
spread_deg = 25
jitter = 0.6

# Tongues along the logs: one small sphere just above each log, either side of the centre.
[[emitters]]
shape = "points"
position_m = [0, 0.24, 0]
size_m = 0.05
points_m = [[0, 0, 0.3], [0, 0, -0.3], [0.26, 0, 0.15], [-0.26, 0, -0.15], [0.26, 0, -0.15], [-0.26, 0, 0.15]]
start_s = 0.0
end_s = 1000
fuel = 4
temperature_k = 1300
velocity_mps = 0.5
direction = "up"
spread_deg = 30
jitter = 0.6

[solver]
air_limit = 0.85
burn_rate = 14
cooling = 3.0
soot = 0.3
smoke_fade = 5.0
drag = 1.5
swirl = 0.8
turbulence = 0.7
turbulence_size_m = 0.2

[look]
exposure = 2.4
smoke_density = 0.6
glow = 0.8

[export]
loop = true
loop_blend_frames = 12
warmup_s = 2.0
tile_px = 192
supersample = 3

House fire, two windows two_window_house_fire.pyro.toml

A ground floor room fire rolling out of two windows and up the front, past a dark upper window. Loop, up to 6 x 9 m, 2 s loop.

final quality · compiled with Spatial Compiler · Bake summary

two_window_house_fire.pyro.toml
# A house fire on the ground floor: flame rolls out of two windows and smoke climbs the front past a
# dark upper window. The building is a block with two rooms and three windows carved out of it, so
# only what vents through the windows shows. Loops.
[meta]
name = "two_window_house_fire"
notes = "Ground floor room fire venting from two windows, looping; six obstacles"

[domain]
size_m = [6, 9, 6]
voxel_m = 0.05
duration_s = 2.0

# The building: front face at Z = -0.4, leaving open air in front for the flame.
[[obstacles]]
shape = "box"
position_m = [0, 3.0, -1.6]
size_m = [2.8, 3.0, 1.2]

# The ground floor room.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 1.4, -1.6]
size_m = [2.4, 1.2, 0.9]

# The upper room, with no fire in it.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 4.2, -1.6]
size_m = [2.4, 1.1, 0.9]

# Two ground floor windows.
[[obstacles]]
shape = "box"
carve = true
position_m = [-1.1, 1.6, -0.5]
size_m = [0.5, 0.6, 0.3]

[[obstacles]]
shape = "box"
carve = true
position_m = [1.1, 1.6, -0.5]
size_m = [0.5, 0.6, 0.3]

# One upper window.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 4.3, -0.5]
size_m = [0.6, 0.6, 0.3]

# Two fires on the floor of the ground floor room, clear of its walls.
[[emitters]]
shape = "disc"
position_m = [-0.9, 0.5, -1.6]
size_m = 0.45
start_s = 0.0
end_s = 1000
fuel = 8
temperature_k = 1500
smoke = 0.3
velocity_mps = 1.0
direction = "up"
spread_deg = 30
jitter = 0.6

[[emitters]]
shape = "disc"
position_m = [0.9, 0.5, -1.5]
size_m = 0.45
start_s = 0.0
end_s = 1000
fuel = 8
temperature_k = 1500
smoke = 0.3
velocity_mps = 1.0
direction = "up"
spread_deg = 30
jitter = 0.6

[solver]
air_limit = 0.6
burn_rate = 12
expansion = 0.8
cooling = 1.5
soot = 0.6
smoke_fade = 3.0
drag = 1.5
swirl = 0.8
turbulence = 0.7
turbulence_size_m = 0.5

[look]
exposure = 2.0
smoke_density = 0.8

[[views]]
name = "front"

[[views]]
name = "corner"
pitch_deg = 15
yaw_deg = 35

[export]
loop = true
loop_blend_frames = 12
warmup_s = 4.0

Jet fire leak jet_fire_leak.pyro.toml

Burning gas jetting sideways from a broken pipe, flapping as it slows. Loop, up to 10 x 7 m, 2 s loop.

final quality · compiled with Spatial Compiler · Bake summary

jet_fire_leak.pyro.toml
# A jet fire from a broken pipe: burning gas shoots sideways, flaps in the turbulence along its length
# and curls upward as it slows. The pipe is a cylinder laid along X with its bore carved out. Loops.
# The colour sheet carries temperature in its alpha, for a reader that drives heat haze from it.
[meta]
name = "jet_fire_leak"
notes = "Horizontal jet fire from a broken pipe, looping"

[domain]
size_m = [10, 7, 6]
voxel_m = 0.05
duration_s = 2.0
substeps = 4

[[obstacles]]
shape = "cylinder"
position_m = [-3, 1.0, 0]
size_m = 0.2
height_m = 4
rotation_deg = [0, 0, 90]

[[obstacles]]
shape = "cylinder"
carve = true
position_m = [-3, 1.0, 0]
size_m = 0.12
height_m = 4.2
rotation_deg = [0, 0, 90]

# The leak, just past the broken end of the pipe.
[[emitters]]
shape = "sphere"
position_m = [-0.7, 1.0, 0]
size_m = 0.15
start_s = 0.0
end_s = 1000
fuel = 10
temperature_k = 900
smoke = 0.2
velocity_mps = 14
direction = [1, 0.05, 0]
spread_deg = 8
jitter = 0.4
lumpiness = 0.3

# The jet flaps along its length.
[[forces]]
kind = "turbulence"
shape = "box"
position_m = [1.5, 1.2, 0]
size_m = [3, 0.8, 0.8]
strength = 8
noise_size_m = 0.5
acts_on = "gas"

[solver]
air_limit = 0.85
burn_rate = 14
cooling = 2.5
soot = 0.3
smoke_fade = 4.0
drag = 0.8
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.4
turbulence_where = "moving"

[look]
exposure = 1.8

[export]
loop = true
loop_blend_frames = 12
warmup_s = 2.0
channels = ["six_way", "emissive", "motion", "depth", "temperature"]
format = "png16"

[export.pack]
colour = ["flame_r", "flame_g", "flame_b", "temperature"]

Smoke

Chimney in shifting wind chimney_shifting_wind.pyro.toml

Chimney smoke while the wind picks up, swings round and drops, so the plume leans one way and then another. A second view looks down from above. One-shot, up to 14 x 16 m, 9 s.

final quality · compiled with Spatial Compiler · Bake summary

chimney_shifting_wind.pyro.toml
# Smoke from a chimney while the wind picks up, swings round and drops again. The wind is keyed, so
# the plume leans one way, then another. The strategy view shows the swing best. One-shot.
[meta]
name = "chimney_shifting_wind"
notes = "Chimney smoke under keyed, shifting wind"

[domain]
size_m = [14, 16, 14]
voxel_m = 0.1
duration_s = 9.0

# The chimney, with its flue carved out.
[[obstacles]]
shape = "box"
position_m = [-3, 3, 0]
size_m = [0.5, 3, 0.5]

[[obstacles]]
shape = "box"
carve = true
position_m = [-3, 3.2, 0]
size_m = [0.3, 3.1, 0.3]

# Smoke leaving the top of the flue.
[[emitters]]
shape = "disc"
position_m = [-3, 6.25, 0]
size_m = 0.35
thickness_m = 0.06
start_s = 0.0
end_s = 6.0
fuel = 0
temperature_k = 550
smoke = 5
velocity_mps = 1.5
direction = "up"
spread_deg = 25
jitter = 0.5

[solver]
cooling = 0.3
smoke_fade = 0.6
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 1.0
turbulence_where = "moving"
drag = 0.3
# Light, then a gust that swings toward the camera, then back the other way.
wind_mps = [[0, 0.5, 0, 0], [3, 2, 0, 0.6], [5.5, 1, 0, -1.2], [9, 0.5, 0, -0.5]]

[[views]]
name = "side"

[[views]]
name = "strategy"
pitch_deg = 55

[export]
channels = ["six_way", "motion", "depth"]

Smoke through a pipe pipe_vent_smoke.pyro.toml

Smoke pushed along a pipe bore by a fan and out of the open end, where it rises. The emitter sits inside the carved bore. Loop, up to 10 x 8 m, 3 s loop.

final quality · compiled with Spatial Compiler · Bake summary

pipe_vent_smoke.pyro.toml
# Smoke blown out of a horizontal pipe: a fan inside the bore pushes it along, it leaves the open end
# as a jet and then rises. The emitter sits inside the bore, which is carved open, and the pipe hides
# the smoke inside it. Loops.
[meta]
name = "pipe_vent_smoke"
notes = "Smoke pushed through a pipe bore and out of its open end, looping"

[domain]
size_m = [10, 8, 6]
voxel_m = 0.06
duration_s = 3.0

[[obstacles]]
shape = "cylinder"
position_m = [-2.5, 1.2, 0]
size_m = 0.35
height_m = 4
rotation_deg = [0, 0, 90]

# The bore, open at both ends.
[[obstacles]]
shape = "cylinder"
carve = true
position_m = [-2.5, 1.2, 0]
size_m = 0.25
height_m = 4.4
rotation_deg = [0, 0, 90]

# Inside the bore, near its far end. The fan pulls air in behind it.
[[emitters]]
shape = "sphere"
position_m = [-3.8, 1.2, 0]
size_m = 0.15
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 450
smoke = 6
velocity_mps = 0
lumpiness = 0.2

# The fan in the bore.
[[forces]]
kind = "push"
shape = "box"
position_m = [-2.5, 1.2, 0]
size_m = [2, 0.25, 0.25]
direction = [1, 0, 0]
strength = 30
max_speed_mps = 3.5
falloff = 0.2

[solver]
cooling = 0.4
smoke_fade = 0.9
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 0.6
turbulence_where = "moving"
drag = 0.4

[look]
smoke_colour = [0.1, 0.095, 0.09]

[export]
loop = true
loop_blend_frames = 12
warmup_s = 4.0
channels = ["six_way", "motion", "depth"]

Smoke under a sliding slab smoke_under_sliding_slab.pyro.toml

A low smoke pool pushed and dragged by a solid sliding over it, as under a hover vehicle or a closing blast door. One-shot, up to 12 x 6 m, 5 s.

final quality · compiled with Spatial Compiler · Bake summary

smoke_under_sliding_slab.pyro.toml
# A low pool of smoke disturbed by a solid sliding over it, as under a hovering vehicle or a closing
# blast door. The slab is a moving obstacle: it pushes the smoke ahead of it and drags it along
# underneath, and the pool spills out behind. One-shot.
[meta]
name = "smoke_under_sliding_slab"
notes = "Ground smoke pushed and dragged by a moving slab"

[domain]
size_m = [12, 6, 8]
voxel_m = 0.06
duration_s = 5.0

# The slab waits, then slides 8 m along X a metre above the floor.
[[obstacles]]
shape = "box"
position_m = [[0, -5, 1, 0], [1.2, -5, 1, 0], [3.2, 3, 1, 0]]
size_m = [1.6, 0.1, 1.6]

# The smoke pool: cool, slow, low.
[[emitters]]
shape = "box"
position_m = [-2, 0.25, 0]
size_m = [1.5, 0.2, 1.2]
start_s = 0.0
end_s = 1.0
fuel = 0
temperature_k = 330
smoke = 6
velocity_mps = 0
lumpiness = 0.6

[solver]
buoyancy = 0.5
cooling = 0.5
smoke_fade = 0.4
swirl = 0.9
turbulence = 0.3
turbulence_size_m = 0.5
turbulence_where = "moving"
drag = 0.3

[[views]]
name = "side"

[[views]]
name = "strategy"
pitch_deg = 55

[export]
channels = ["six_way", "motion", "depth"]

Signal smoke puffs signal_smoke_puffs.pyro.toml

Red signal smoke from a canister in four puffs, switched on and off with step keys and carried off by a light wind. One-shot, up to 8 x 12 m, 8 s.

final quality · compiled with Spatial Compiler · Bake summary

signal_smoke_puffs.pyro.toml
# Red signal smoke from a canister on the ground, coming in four puffs. The smoke rate is keyed with
# step easing, so it switches on and off instead of fading. A light wind carries the puffs off. One-shot.
[meta]
name = "signal_smoke_puffs"
notes = "Red signal smoke in four puffs from a canister"

[domain]
size_m = [8, 12, 8]
voxel_m = 0.07
duration_s = 8.0

# The canister.
[[obstacles]]
shape = "cylinder"
position_m = [-1.5, 0.125, 0]
size_m = 0.08
height_m = 0.25

[[emitters]]
shape = "disc"
position_m = [-1.5, 0.32, 0]
size_m = 0.12
thickness_m = 0.03
start_s = 0.0
end_s = 4.0
fuel = 0
temperature_k = 500
smoke = [[0, 8], [0.399, 8], [0.4, 0], [1.199, 0], [1.2, 8], [1.599, 8], [1.6, 0], [2.399, 0], [2.4, 8], [2.799, 8], [2.8, 0], [3.599, 0], [3.6, 8], [3.999, 8], [4, 0]]
velocity_mps = 3
direction = "up"
spread_deg = 20
jitter = 0.5

[solver]
cooling = 0.5
smoke_fade = 0.7
swirl = 0.9
turbulence = 0.4
turbulence_size_m = 0.5
turbulence_where = "moving"
drag = 0.4
wind_mps = [1.0, 0, 0]

[look]
# Linear light: this reads as a strong signal red, not pink.
smoke_colour = [0.35, 0.05, 0.03]
smoke_density = 1.4

[export]
channels = ["six_way", "motion", "depth"]

Sheared blast column sheared_blast_column.pyro.toml

The smoke column after a blast, bent off at its head by wind that picks up aloft after a second and a half. One-shot, up to 16 x 18 m, 7 s.

final quality · compiled with Spatial Compiler · Bake summary

sheared_blast_column.pyro.toml
# The smoke column left by a blast, sheared by wind that picks up aloft. A push across the top of the
# box ramps up after a second and a half, so the head of the column bends off while the foot stays,
# and gusts tear at the bend. One-shot.
[meta]
name = "sheared_blast_column"
notes = "Post-blast smoke column sheared by a keyed push aloft"

[domain]
size_m = [16, 18, 12]
voxel_m = 0.1
duration_s = 7.0

[[emitters]]
shape = "sphere"
position_m = [-4, 0.8, 0]
size_m = 1.0
start_s = 0.0
end_s = 0.8
fuel = 0
temperature_k = 700
smoke = 6
velocity_mps = 3
direction = "up"
spread_deg = 50
jitter = 0.5

# Wind aloft that starts after the column has risen.
[[forces]]
kind = "push"
shape = "box"
position_m = [0, 13, 0]
size_m = [8, 5, 6]
direction = [1, 0, 0]
strength = [[0, 0], [1.5, 0], [3.5, 3]]
max_speed_mps = 3.5
falloff = 0.6

# Gusts where the column bends.
[[forces]]
kind = "turbulence"
position_m = [-1, 10, 0]
size_m = 3.5
strength = 4
noise_size_m = 1.2
acts_on = "gas"
start_s = 1.5

[solver]
cooling = 0.3
smoke_fade = 0.6
swirl = 0.7
turbulence = 0.5
turbulence_size_m = 1.2
turbulence_where = "moving"
wind_mps = [0.3, 0, 0]

[export]
pacing = "front"
channels = ["six_way", "motion", "depth"]

Vortex smoke loft vortex_smoke_loft.pyro.toml

Smoke and dust drawn off a burnt field into a slow spinning column by a vortex and a pull at its foot. Loop, up to 8 x 14 m, 3 s loop.

final quality · compiled with Spatial Compiler · Bake summary

vortex_smoke_loft.pyro.toml
# Smoke and dust drawn off a burnt field into a slow spinning column, the way a strong thermal over a
# fire lofts it. A vortex up the column spins it and a pull at the foot keeps it narrow. Loops.
[meta]
name = "vortex_smoke_loft"
notes = "Smoke and dust spun into a rising column by a vortex, looping"

[domain]
size_m = [8, 14, 8]
voxel_m = 0.07
duration_s = 3.0

[[emitters]]
shape = "ring"
position_m = [0, 0.2, 0]
size_m = 1.2
thickness_m = 0.12
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 420
smoke = 3
dust = 1.5
velocity_mps = 0.6
direction = "up"
spread_deg = 30

[[forces]]
kind = "vortex"
shape = "box"
position_m = [0, 6, 0]
size_m = [1.6, 6, 1.6]
direction = [0, 1, 0]
strength = 12
max_speed_mps = 4
falloff = 0.4

[[forces]]
kind = "point"
position_m = [0, 1.0, 0]
size_m = 2.2
strength = -5
falloff = 0.6

[solver]
cooling = 0.3
smoke_fade = 0.8
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 0.8
turbulence_where = "moving"
drag = 0.5

[look]
smoke_colour = [0.07, 0.065, 0.06]
dust_colour = [0.22, 0.17, 0.11]

[export]
loop = true
loop_blend_frames = 12
warmup_s = 5.0
channels = ["six_way", "motion", "depth"]

Impact and dust

Mortar crater mortar_crater.pyro.toml

A heavy mortar round on dirt: flash, earth cone, fast skirt, slower rolling rim and a short shock. One-shot, up to 10 x 8 m, 3.5 s.

final quality · compiled with Spatial Compiler · Bake summary

mortar_crater.pyro.toml
# A heavy mortar round on dirt, larger than the official impact: a flash, earth thrown up in a cone,
# a fast skirt and a slower rolling rim, all pushed by a short shock. Pressure is solved in 32 bit
# numbers and to a tighter accuracy, which keeps the falling dust from drifting. One-shot.
[meta]
name = "mortar_crater"
notes = "Heavy mortar impact on dirt: flash, earth cone, skirt, rolling rim, shock"

[domain]
size_m = [10, 8, 10]
voxel_m = 0.055
duration_s = 3.5
substeps = 3

# The flash. Little fuel and short, so it does not carry the dust up as a column.
[[emitters]]
shape = "sphere"
position_m = [0, 0.3, 0]
size_m = 0.45
start_s = 0.0
end_s = 0.06
fuel = 3
temperature_k = 2000
smoke = 2.0
velocity_mps = 7
direction = "radial"

# Earth thrown up and outward.
[[emitters]]
shape = "sphere"
position_m = [0, 0.25, 0]
size_m = 0.45
start_s = 0.0
end_s = 0.15
fuel = 0
temperature_k = 293
dust = 14
velocity_mps = 12
direction = "up"
spread_deg = 110
jitter = 0.6

# The fast skirt along the ground.
[[emitters]]
shape = "ring"
position_m = [0, 0.2, 0]
size_m = 0.6
thickness_m = 0.12
start_s = 0.0
end_s = 0.12
fuel = 0
temperature_k = 293
dust = 10
velocity_mps = 9
direction = "radial"
jitter = 0.6

# The slower rim that rolls out after it.
[[emitters]]
shape = "disc"
position_m = [0, 0.15, 0]
size_m = 0.8
thickness_m = 0.08
start_s = 0.08
end_s = 0.4
fuel = 0
temperature_k = 293
dust = 6
velocity_mps = 3
direction = "radial"
spread_deg = 70
jitter = 0.6

[[forces]]
kind = "expand"
position_m = [0, 0.3, 0]
size_m = 1.2
strength = 4.0
start_s = 0.0
end_s = 0.06

[solver]
burn_rate = 30
cooling = 8
air_limit = 0.5
buoyancy = 0.3
smoke_fade = 1.3
swirl = 0.6
turbulence = 0.5
turbulence_size_m = 0.4
turbulence_where = "moving"
drag = 0.9
precision = "full"
pressure_accuracy = 0.005

[look]
exposure = 2.5
smoke_colour = [0.05, 0.05, 0.05]
dust_colour = [0.12, 0.085, 0.05]

[[views]]
name = "side"

[[views]]
name = "strategy"
pitch_deg = 55

[export]
pacing = "front"

Dropship landing dropship_landing.pyro.toml

A hull settling to the ground while its downwash blasts a ring of dust outward. The hull is a moving obstacle. One-shot, up to 16 x 8 m, 6 s.

final quality · compiled with Spatial Compiler · Bake summary

dropship_landing.pyro.toml
# A dropship settling onto dry ground: its downwash ramps up as it descends and blasts a ring of dust
# outward along the ground. The hull is a capsule that moves down, so it also shoves the air under
# it, and it hides the dust behind it in the sheet. One-shot.
[meta]
name = "dropship_landing"
notes = "Descending hull with keyed downwash kicking up a dust ring"

[domain]
size_m = [16, 8, 16]
voxel_m = 0.08
duration_s = 6.0

# The hull, lying along X, coming down from 6 m to 2 m.
[[obstacles]]
shape = "capsule"
position_m = [[0, 0, 6, 0], [2, 0, 2.2, 0], [2.6, 0, 2, 0]]
size_m = 1.0
height_m = 3
rotation_deg = [0, 0, 90]

# The downwash under the hull. It follows the hull down and grows stronger near the ground.
[[forces]]
kind = "push"
shape = "box"
position_m = [[0, 0, 3.8, 0], [2, 0, 1, 0], [2.6, 0, 0.8, 0]]
size_m = [2, 0.6, 2]
direction = [0, -1, 0]
strength = [[0, 4], [2, 20], [6, 20]]
max_speed_mps = 9
falloff = 0.4

# Loose dust on the ground, lifted only by the moving air.
[[emitters]]
shape = "disc"
position_m = [0, 0.1, 0]
size_m = 2.5
thickness_m = 0.08
start_s = 1.0
end_s = 5.0
fuel = 0
temperature_k = 293
dust = [[1, 0], [1.8, 6], [3.5, 3], [5, 0]]
velocity_mps = 0

# The ring blown outward once the wash reaches the ground.
[[emitters]]
shape = "ring"
position_m = [0, 0.2, 0]
size_m = 2.2
thickness_m = 0.15
start_s = 1.6
end_s = 4.0
fuel = 0
temperature_k = 293
dust = 5
velocity_mps = 6
direction = "radial"
jitter = 0.6

[solver]
buoyancy = 0.3
cooling = 2.0
smoke_fade = 0.9
swirl = 0.7
turbulence = 0.6
turbulence_size_m = 0.6
turbulence_where = "moving"
drag = 0.6

[look]
dust_colour = [0.3, 0.24, 0.16]

[[views]]
name = "side"

[[views]]
name = "strategy"
pitch_deg = 55

[export]
channels = ["six_way", "motion", "depth"]

Collapse dust surge collapse_dust_surge.pyro.toml

A building sinking into the ground in a surge of dust from its foot and its roof. The block is a moving obstacle. One-shot, up to 14 x 9 m, 6 s.

final quality · compiled with Spatial Compiler · Bake summary

collapse_dust_surge.pyro.toml
# A building coming down in a surge of dust: the block sinks into the ground, a ring of dust rolls
# out from its foot and a cloud spills off its roof as it drops. The block is a moving obstacle and is
# gone once it is below the floor. One-shot.
[meta]
name = "collapse_dust_surge"
notes = "Sinking block with a dust surge from its foot and its roof"

[domain]
size_m = [14, 9, 14]
voxel_m = 0.08
duration_s = 6.0

# The building: stands for 0.4 s, then sinks 5 m in 2 s.
[[obstacles]]
shape = "box"
position_m = [[0, 0, 2.5, 0], [0.4, 0, 2.5, 0], [2.4, 0, -2.6, 0]]
size_m = [1.5, 2.5, 1.5]
end_s = 2.6

# The surge from the foot, clear of the corners of the block.
[[emitters]]
shape = "ring"
position_m = [0, 0.3, 0]
size_m = 2.3
thickness_m = 0.2
start_s = 0.5
end_s = 2.6
fuel = 0
temperature_k = 293
dust = [[0.5, 4], [1.4, 10], [2.6, 2]]
velocity_mps = [[0.5, 2], [1.2, 8], [2.6, 3]]
direction = "radial"
jitter = 0.6

# Dust off the roof. It rides 0.2 m above the roof all the way down.
[[emitters]]
shape = "disc"
position_m = [[0, 0, 5.2, 0], [0.4, 0, 5.2, 0], [2.4, 0, 0.1, 0]]
size_m = 1.4
thickness_m = 0.05
start_s = 0.4
end_s = 2.4
fuel = 0
temperature_k = 293
dust = 5
velocity_mps = 1.0
direction = "up"
spread_deg = 60

[solver]
buoyancy = 0.3
cooling = 2.0
smoke_fade = 0.7
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.7
turbulence_where = "moving"
drag = 0.6

[look]
dust_colour = [0.26, 0.24, 0.21]

[[views]]
name = "side"

[[views]]
name = "strategy"
pitch_deg = 55

[export]
channels = ["six_way", "motion", "depth"]

Strafing dust line strafing_dust_line.pyro.toml

Six dust spouts walking along the ground a tenth of a second apart. One-shot, up to 16 x 5 m, 2.5 s.

final quality · compiled with Spatial Compiler · Bake summary

strafing_dust_line.pyro.toml
# Dust spouts from a strafing run walking along the ground, one every tenth of a second. Each hit is
# its own short emitter. The view uses a fixed scale of 15 m per tile, to match other sheets drawn
# at that scale, and the sheet is 8 x 4 tiles. One-shot.
[meta]
name = "strafing_dust_line"
notes = "Six dust spouts walking along a line, fixed scale view"

[domain]
size_m = [16, 5, 6]
voxel_m = 0.065
duration_s = 2.5
substeps = 3

[[emitters]]
shape = "sphere"
position_m = [-6.5, 0.15, 0]
size_m = 0.15
start_s = 0.0
end_s = 0.06
fuel = 0
temperature_k = 293
dust = 14
velocity_mps = 9
direction = "up"
spread_deg = 35
jitter = 0.6

[[emitters]]
shape = "sphere"
position_m = [-4.0, 0.15, 0.3]
size_m = 0.15
start_s = 0.1
end_s = 0.16
fuel = 0
temperature_k = 293
dust = 14
velocity_mps = 9
direction = "up"
spread_deg = 35
jitter = 0.6

[[emitters]]
shape = "sphere"
position_m = [-1.5, 0.15, -0.2]
size_m = 0.15
start_s = 0.2
end_s = 0.26
fuel = 0
temperature_k = 293
dust = 14
velocity_mps = 9
direction = "up"
spread_deg = 35
jitter = 0.6

[[emitters]]
shape = "sphere"
position_m = [1.0, 0.15, 0.1]
size_m = 0.15
start_s = 0.3
end_s = 0.36
fuel = 0
temperature_k = 293
dust = 14
velocity_mps = 9
direction = "up"
spread_deg = 35
jitter = 0.6

[[emitters]]
shape = "sphere"
position_m = [3.5, 0.15, -0.3]
size_m = 0.15
start_s = 0.4
end_s = 0.46
fuel = 0
temperature_k = 293
dust = 14
velocity_mps = 9
direction = "up"
spread_deg = 35
jitter = 0.6

[[emitters]]
shape = "sphere"
position_m = [6.0, 0.15, 0]
size_m = 0.15
start_s = 0.5
end_s = 0.56
fuel = 0
temperature_k = 293
dust = 14
velocity_mps = 9
direction = "up"
spread_deg = 35
jitter = 0.6

[solver]
buoyancy = 0.3
cooling = 4.0
smoke_fade = 1.5
swirl = 0.6
turbulence = 0.5
turbulence_size_m = 0.3
turbulence_where = "moving"
drag = 1.0

[look]
dust_colour = [0.14, 0.1, 0.065]

[[views]]
name = "side"
fit = "fixed"
metres_per_tile = 15
margin = 0.02

[export]
grid = [8, 4]
pacing = "front"
channels = ["six_way", "motion", "depth"]

Meteor strike meteor_strike.pyro.toml

A burning body streaking down at a steep angle and striking the ground: trail, flash, thrown earth, dust ring and shock. One-shot, up to 14 x 12 m, 4.5 s.

final quality · compiled with Spatial Compiler · Bake summary

meteor_strike.pyro.toml
# A burning object streaking down at a steep angle and striking the ground: a hot trail behind it,
# then a flash, a cone of thrown earth, a dust ring and a short shock at the moment of impact,
# half a second in. One-shot.
[meta]
name = "meteor_strike"
notes = "Moving hot source with a trail, then a multi-stage ground impact at 0.5 s"

[domain]
size_m = [14, 12, 14]
voxel_m = 0.08
duration_s = 4.5
substeps = 3

# The incoming body: 12 m of travel in half a second, leaving its gas behind as a trail.
[[emitters]]
shape = "sphere"
position_m = [[0.0, -6, 11, -2], [0.5, 0, 0.7, 0]]
size_m = 0.35
start_s = 0.0
end_s = 0.5
fuel = 4
temperature_k = 2200
smoke = 1.0
velocity_mps = 0.5
inherit_velocity = 0.1
lumpiness = 0.3

# The flash at impact.
[[emitters]]
shape = "sphere"
position_m = [0, 0.5, 0]
size_m = 0.7
start_s = 0.5
end_s = 0.58
fuel = 5
temperature_k = 2400
smoke = 2.0
velocity_mps = 8

# Earth thrown up.
[[emitters]]
shape = "sphere"
position_m = [0, 0.3, 0]
size_m = 0.6
start_s = 0.5
end_s = 0.65
fuel = 0
temperature_k = 293
dust = 12
velocity_mps = 12
direction = "up"
spread_deg = 110
jitter = 0.6

# The ring along the ground.
[[emitters]]
shape = "ring"
position_m = [0, 0.25, 0]
size_m = 0.9
thickness_m = 0.15
start_s = 0.5
end_s = 0.62
fuel = 0
temperature_k = 293
dust = 10
velocity_mps = 12
direction = "radial"
jitter = 0.6

[[forces]]
kind = "expand"
position_m = [0, 0.5, 0]
size_m = 2.0
strength = 5.0
start_s = 0.5
end_s = 0.6

[solver]
air_limit = 0.7
burn_rate = 20
cooling = 4.0
buoyancy = 0.5
smoke_fade = 1.1
swirl = 0.7
turbulence = 0.5
turbulence_size_m = 0.5
drag = 0.6

[look]
exposure = 2.0
smoke_colour = [0.045, 0.04, 0.04]
dust_colour = [0.13, 0.09, 0.055]

[[views]]
name = "side"

[[views]]
name = "strategy"
pitch_deg = 55

[export]
pacing = "front"

Mech footfall mech_footfall.pyro.toml

A giant walker's foot coming down on dry ground and throwing a ring of dust at the moment it lands. One-shot, up to 10 x 6 m, 3 s.

final quality · compiled with Spatial Compiler · Bake summary

mech_footfall.pyro.toml
# A giant walker's foot coming down on dry ground: the foot drops, shoves the air out from under it,
# and a ring of dust bursts out at the moment it lands. The foot is a moving obstacle that stays
# planted. One-shot.
[meta]
name = "mech_footfall"
notes = "Falling foot obstacle with a dust ring at contact, 0.35 s"

[domain]
size_m = [10, 6, 10]
voxel_m = 0.06
duration_s = 3.0
substeps = 3

# The foot: 3 m up, planted at 0.35 s.
[[obstacles]]
shape = "box"
position_m = [[0.0, 0, 3.0, 0], [0.35, 0, 0.32, 0]]
size_m = [0.8, 0.3, 1.1]

# The ring at contact, just outside the corners of the foot.
[[emitters]]
shape = "ring"
position_m = [0, 0.2, 0]
size_m = 1.6
thickness_m = 0.12
start_s = 0.35
end_s = 0.45
fuel = 0
temperature_k = 293
dust = 12
velocity_mps = 10
direction = "radial"
jitter = 0.6

# The air squeezed out from under the foot carries the dust out further.
[[forces]]
kind = "point"
position_m = [0, 0.3, 0]
size_m = 2.5
strength = 30
acts_on = "gas"
start_s = 0.35
end_s = 0.45

[solver]
buoyancy = 0.3
cooling = 4.0
smoke_fade = 1.4
swirl = 0.6
turbulence = 0.6
turbulence_size_m = 0.4
turbulence_where = "moving"
drag = 0.8

[look]
dust_colour = [0.15, 0.11, 0.07]

[[views]]
name = "side"

[[views]]
name = "strategy"
pitch_deg = 55

[export]
pacing = "front"
channels = ["six_way", "motion", "depth"]

[export.pack]
aux = ["motion_x", "motion_y", "depth", "thickness"]

Environmental

Steam under a hull steam_under_hull.pyro.toml

Steam from floor vents hitting the curved underside of a ship's hull, running along it and spilling past the sides. Loop, up to 12 x 7 m, 3 s loop.

final quality · compiled with Spatial Compiler · Bake summary

steam_under_hull.pyro.toml
# Steam rising from vents under a ship's hull in dry dock: it hits the curved underside, runs along it
# and spills up past the sides. The hull is a capsule laid along X; the vents are one points emitter.
# Steam is pale, so the smoke colour is the lightest in the library and fades fast. Loops.
[meta]
name = "steam_under_hull"
notes = "Steam vents under a hull, spreading along its underside, looping"

[domain]
size_m = [12, 7, 8]
voxel_m = 0.06
duration_s = 3.0

[[obstacles]]
shape = "capsule"
position_m = [0, 2.6, 0]
size_m = 1.2
height_m = 7
rotation_deg = [0, 0, 90]

# Four vents in the floor under the hull.
[[emitters]]
shape = "points"
position_m = [0, 0.3, 0]
size_m = 0.15
points_m = [[-3, 0, 0], [-1, 0, 0.3], [1, 0, -0.3], [3, 0, 0]]
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 380
smoke = 4
velocity_mps = 2
direction = "up"
spread_deg = 15
jitter = 0.5

[solver]
cooling = 0.6
smoke_fade = 1.5
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 0.5
turbulence_where = "moving"
drag = 0.4

[look]
smoke_colour = [0.3, 0.31, 0.33]
smoke_density = 0.8
shadow = 0.5
soft_light = 0.6

[export]
loop = true
loop_blend_frames = 12
warmup_s = 4.0
channels = ["six_way", "motion", "depth"]

Courtyard smoke courtyard_smoke.pyro.toml

Smoke pooling in a walled courtyard and spilling over the downwind wall where a breeze crosses the top. Loop, up to 12 x 12 m, 4 s loop.

final quality · compiled with Spatial Compiler · Bake summary

courtyard_smoke.pyro.toml
# Smoke filling a walled courtyard from a fire inside it, then spilling over the downwind wall where
# a breeze crosses the top. The walls are a block with the courtyard and a gate carved out of it. The
# strategy view is the one to use. Loops.
[meta]
name = "courtyard_smoke"
notes = "Smoke pooling in a walled courtyard and spilling over the downwind wall, looping"

[domain]
size_m = [12, 12, 12]
voxel_m = 0.08
duration_s = 4.0

# The walls: a block 8 m square and 3 m high...
[[obstacles]]
shape = "box"
position_m = [0, 1.5, 0]
size_m = [4, 1.5, 4]

# ...with the courtyard carved out of it, open to the sky, leaving a 0.1 m floor.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 1.7, 0]
size_m = [3.6, 1.6, 3.6]

# A gate in the front wall.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 0.9, 3.8]
size_m = [0.6, 0.9, 0.5]

# The fire in the courtyard: smoke only, kept clear of the walls.
[[emitters]]
shape = "disc"
position_m = [-1.5, 0.35, -1.0]
size_m = 0.6
thickness_m = 0.12
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 480
smoke = 4
velocity_mps = 1.0
direction = "up"
spread_deg = 30
jitter = 0.5

# The breeze above the wall tops.
[[forces]]
kind = "push"
shape = "box"
position_m = [0, 5, 0]
size_m = [6, 2, 6]
direction = [1, 0, 0.3]
strength = 3
max_speed_mps = 2.5
falloff = 0.5

[solver]
cooling = 0.4
smoke_fade = 0.6
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 0.8
turbulence_where = "moving"
drag = 0.4

[[views]]
name = "strategy"
pitch_deg = 55

[[views]]
name = "side"

[export]
loop = true
loop_blend_frames = 12
warmup_s = 6.0
channels = ["six_way", "motion", "depth"]

Canyon wind plume canyon_wind_plume.pyro.toml

A plume streaming along a canyon between two cliffs. The near cliff has holdout off, so the side view sees through it. Loop, up to 16 x 10 m, 4 s loop.

final quality · compiled with Spatial Compiler · Bake summary

canyon_wind_plume.pyro.toml
# A smoke plume caught in a canyon: the wind runs along the gorge, so the plume lies over and streams
# between the cliffs instead of spreading. The near cliff has holdout off, so the side view sees the
# smoke through it as if it were glass; it still shades the smoke. Loops.
[meta]
name = "canyon_wind_plume"
notes = "Plume streaming along a canyon between two cliffs, looping"

[domain]
size_m = [16, 10, 10]
voxel_m = 0.08
duration_s = 4.0

# The far cliff.
[[obstacles]]
shape = "box"
position_m = [0, 4, -3.0]
size_m = [8, 4, 1.5]

# The near cliff, between the camera and the smoke.
[[obstacles]]
shape = "box"
position_m = [0, 3, 3.2]
size_m = [8, 3, 1.5]
holdout = false

[[emitters]]
shape = "disc"
position_m = [-5, 0.3, 0]
size_m = 0.6
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 560
smoke = 4.5
velocity_mps = 1.5
direction = "up"
spread_deg = 30
jitter = 0.5

# Gusts where the wind comes off the cliff tops.
[[forces]]
kind = "turbulence"
shape = "box"
position_m = [1, 6.5, 0]
size_m = [6, 1.2, 2]
strength = 3
noise_size_m = 1.0
acts_on = "gas"

[solver]
cooling = 0.3
smoke_fade = 0.6
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 1.0
turbulence_where = "moving"
drag = 0.3
wind_mps = [2.0, 0, 0]

[[views]]
name = "side"

[[views]]
name = "strategy"
pitch_deg = 55

[export]
loop = true
loop_blend_frames = 12
warmup_s = 5.0
channels = ["six_way", "motion", "depth"]

Doorway smoke doorway_smoke_holdout.pyro.toml

Smoke from a smoldering room leaking out of the top of its doorway and climbing the wall. The building holds out the room. Loop, up to 8 x 6 m, 3 s loop.

final quality · compiled with Spatial Compiler · Bake summary

doorway_smoke_holdout.pyro.toml
# Smoke from a smoldering room leaking out of the top of its doorway and climbing the front wall.
# The building holds out the gas behind it, so the room shows only through the door and the game's
# own model fills the rest. The side view shows the smoke hugging the wall. Loops.
[meta]
name = "doorway_smoke_holdout"
notes = "Smoke leaking from a doorway and up the facade, looping"

[domain]
size_m = [8, 6, 7]
voxel_m = 0.05
duration_s = 3.0

[[obstacles]]
shape = "box"
position_m = [0, 2.5, -2.0]
size_m = [3, 2.5, 1.5]

[[obstacles]]
shape = "box"
carve = true
position_m = [0, 1.4, -2.0]
size_m = [2.7, 1.2, 1.2]

# The doorway.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 1.2, -0.6]
size_m = [0.5, 1.0, 0.3]

# The smoldering pile in the back corner of the room.
[[emitters]]
shape = "sphere"
position_m = [-1.5, 0.8, -2.2]
size_m = 0.4
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 520
smoke = 4
velocity_mps = 0.5
lumpiness = 0.4

[solver]
cooling = 0.5
smoke_fade = 0.7
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 0.4
turbulence_where = "moving"
drag = 0.5

[look]
smoke_colour = [0.06, 0.055, 0.05]

[[views]]
name = "front"

[[views]]
name = "side"
yaw_deg = 90

[export]
loop = true
loop_blend_frames = 12
warmup_s = 6.0
channels = ["six_way", "motion", "depth"]

Fan pulling a plume fan_pulled_plume.pyro.toml

A plume drawn sideways into a big extraction fan with two spinning blades and a push through its shroud. Loop, up to 10 x 8 m, 3 s loop.

final quality · compiled with Spatial Compiler · Bake summary

fan_pulled_plume.pyro.toml
# A plume drawn sideways into a big extraction fan. The fan is a shroud (a cylinder with its bore
# carved out) and two crossed blades that spin at one turn a second and drag the air; a push inside the
# shroud does the pulling. Loops.
[meta]
name = "fan_pulled_plume"
notes = "Smoke plume pulled into a spinning fan, looping"

[domain]
size_m = [10, 8, 8]
voxel_m = 0.06
duration_s = 3.0

# The shroud, its axis along X.
[[obstacles]]
shape = "cylinder"
position_m = [3, 2.5, 0]
size_m = 0.9
height_m = 0.4
rotation_deg = [0, 0, 90]

[[obstacles]]
shape = "cylinder"
carve = true
position_m = [3, 2.5, 0]
size_m = 0.8
height_m = 0.5
rotation_deg = [0, 0, 90]

# Two blades spinning about X at 360 degrees a second, a quarter turn apart.
[[obstacles]]
shape = "box"
position_m = [3, 2.5, 0]
size_m = [0.05, 0.75, 0.12]
rotation_deg = [[0, 0, 0, 0], [100, 36000, 0, 0]]

[[obstacles]]
shape = "box"
position_m = [3, 2.5, 0]
size_m = [0.05, 0.75, 0.12]
rotation_deg = [[0, -90, 0, 0], [100, 35910, 0, 0]]

# The pull through the shroud.
[[forces]]
kind = "push"
shape = "box"
position_m = [3, 2.5, 0]
size_m = [0.4, 0.8, 0.8]
direction = [1, 0, 0]
strength = 25
max_speed_mps = 4
falloff = 0.3

[[emitters]]
shape = "disc"
position_m = [-1.5, 0.3, 0]
size_m = 0.5
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 500
smoke = 4
velocity_mps = 1.2
direction = "up"
spread_deg = 25
jitter = 0.5

[solver]
cooling = 0.4
smoke_fade = 0.7
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 0.6
turbulence_where = "moving"
drag = 0.4

[export]
loop = true
loop_blend_frames = 12
warmup_s = 4.0
channels = ["six_way", "motion", "depth"]

Rooftop vents in wind rooftop_vents_wind.pyro.toml

Exhaust from three roof vents, fed by one points emitter, streaming off in a gusty crosswind. Loop, up to 12 x 8 m, 3 s loop.

final quality · compiled with Spatial Compiler · Bake summary

rooftop_vents_wind.pyro.toml
# Exhaust from three vents on a flat roof, streaming off in a gusty crosswind. The roof is a box that
# fills the floor of the element, the vents are cylinders on it, and one points emitter feeds all
# three vent tops. Loops.
[meta]
name = "rooftop_vents_wind"
notes = "Three roof vents streaming in a gusty crosswind, looping"

[domain]
size_m = [12, 8, 8]
voxel_m = 0.07
duration_s = 3.0

# The roof, 2 m up.
[[obstacles]]
shape = "box"
position_m = [0, 1, 0]
size_m = [6, 1, 4]

[[obstacles]]
shape = "cylinder"
position_m = [-3, 2.4, -1]
size_m = 0.2
height_m = 0.8

[[obstacles]]
shape = "cylinder"
position_m = [0, 2.4, 1]
size_m = 0.2
height_m = 0.8

[[obstacles]]
shape = "cylinder"
position_m = [2.5, 2.4, -0.5]
size_m = 0.2
height_m = 0.8

# The vent tops, at 2.95 m, just above the 2.8 m lips.
[[emitters]]
shape = "points"
position_m = [0, 2.95, 0]
size_m = 0.16
points_m = [[-3, 0, -1], [0, 0, 1], [2.5, 0, -0.5]]
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 420
smoke = 3
velocity_mps = 2
direction = "up"
spread_deg = 15
jitter = 0.5

# Gusts over the whole roof.
[[forces]]
kind = "turbulence"
shape = "everywhere"
strength = 3
noise_size_m = 1.0
acts_on = "gas"

[solver]
cooling = 0.5
smoke_fade = 1.0
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 0.6
turbulence_where = "moving"
drag = 0.4
wind_mps = [1.8, 0, 0.4]

[look]
smoke_colour = [0.18, 0.18, 0.19]

[[views]]
name = "side"

[[views]]
name = "strategy"
pitch_deg = 55

[export]
loop = true
loop_blend_frames = 12
warmup_s = 5.0
channels = ["six_way", "motion", "depth"]

Stylized

Cold blue fire cold_blue_fire.pyro.toml

A blue flame ramp with a slow curl, for a frost spell or a spirit flame. The flame is ordinary burning gas with a different color ramp. Loop, up to 5 x 7 m, 2 s loop.

final quality · compiled with Spatial Compiler · Bake summary

cold_blue_fire.pyro.toml
# A cold blue fire for a frost spell or a spirit flame: the flame ramp runs from deep blue to white
# instead of blackbody orange, and a slow vortex gives the column a curl. Still burning gas, only
# coloured differently. Loops.
[meta]
name = "cold_blue_fire"
notes = "Blue flame ramp with a slow curl, looping"

[domain]
size_m = [5, 7, 5]
voxel_m = 0.045
duration_s = 2.0

[[emitters]]
shape = "disc"
position_m = [0, 0.15, 0]
size_m = 0.55
start_s = 0.0
end_s = 1000
fuel = 6
temperature_k = 1500
smoke = 0.1
velocity_mps = 1.5
direction = "up"
spread_deg = 25
jitter = 0.6

[[forces]]
kind = "vortex"
shape = "box"
position_m = [0, 2.5, 0]
size_m = [0.9, 2.5, 0.9]
direction = [0, 1, 0]
strength = 6
max_speed_mps = 2
falloff = 0.5

[solver]
air_limit = 0.88
burn_rate = 12
cooling = 2.5
soot = 0.15
smoke_fade = 6.0
drag = 1.5
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.4

[look]
# [kelvin, r, g, b] in linear light: deep blue at the edges, white at the hottest core.
flame_ramp = [[700, 0.0, 0.02, 0.1], [1100, 0.03, 0.18, 0.9], [1500, 0.2, 0.55, 1.0], [2000, 0.8, 0.92, 1.0]]
exposure = 2.4
smoke_colour = [0.03, 0.04, 0.06]
smoke_density = 0.5
glow = 0.8

[export]
loop = true
loop_blend_frames = 12
warmup_s = 2.5

Alchemical cauldron alchemical_cauldron.pyro.toml

Low green flames over a cauldron and a heavy green vapor, made of dust, pouring over the rim and across the floor. Loop, up to 5 x 6 m, 2 s loop.

final quality · compiled with Spatial Compiler · Bake summary

alchemical_cauldron.pyro.toml
# A cauldron of green alchemical fire: low green flames over the brew and a heavy green vapour that
# spills over the rim and rolls across the floor. The vapour is dust with a green colour, since dust is
# the heavy, cold part of pyrofx. The cauldron is a sphere hollowed by two carves. Loops.
[meta]
name = "alchemical_cauldron"
notes = "Green flame ramp over a cauldron, heavy green vapour spilling over the rim, looping"

[domain]
size_m = [5, 6, 5]
voxel_m = 0.04
duration_s = 2.0

# The pot: a sphere, hollowed out, with its top cut off.
[[obstacles]]
shape = "sphere"
position_m = [0, 0.55, 0]
size_m = 0.6

[[obstacles]]
shape = "sphere"
carve = true
position_m = [0, 0.62, 0]
size_m = 0.52

[[obstacles]]
shape = "box"
carve = true
position_m = [0, 1.15, 0]
size_m = [0.7, 0.4, 0.7]

# The vapour, inside the pot. It is cold and heavy, so it pours over the rim.
[[emitters]]
shape = "disc"
position_m = [0, 0.75, 0]
size_m = 0.35
thickness_m = 0.05
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 293
dust = 3
velocity_mps = 0.5
direction = "up"
spread_deg = 60
jitter = 0.6

# Low flames over the brew.
[[emitters]]
shape = "disc"
position_m = [0, 0.95, 0]
size_m = 0.3
thickness_m = 0.04
start_s = 0.0
end_s = 1000
fuel = 3
temperature_k = 1300
smoke = 0.2
velocity_mps = 0.6
direction = "up"
spread_deg = 30
jitter = 0.6

[solver]
air_limit = 0.85
burn_rate = 12
cooling = 3.0
buoyancy = 0.7
soot = 0.2
smoke_fade = 1.2
drag = 1.0
swirl = 0.8
turbulence = 0.5
turbulence_size_m = 0.3

[look]
flame_ramp = [[700, 0.0, 0.05, 0.0], [1000, 0.05, 0.4, 0.05], [1300, 0.3, 0.9, 0.2], [1800, 0.85, 1.0, 0.7]]
exposure = 2.0
smoke_colour = [0.04, 0.16, 0.06]
dust_colour = [0.06, 0.2, 0.08]
glow = 1.0

[export]
loop = true
loop_blend_frames = 12
warmup_s = 3.0

Ember brazier ember_brazier.pyro.toml

Low, ember-warm fire in a brazier bowl: a deep red to amber ramp and strong glow in the smoke above it. Loop, up to 3 x 4.5 m, 2 s loop.

final quality · compiled with Spatial Compiler · Bake summary

ember_brazier.pyro.toml
# A brazier of low, ember-warm fire for a hall or a camp at night: a deep red to amber ramp, low
# exposure and strong glow, so the light sits in the smoke above the bowl. The brazier is a carved
# cylinder bowl on a thin stand. Loops.
[meta]
name = "ember_brazier"
notes = "Ember-warm ramp with strong glow over a brazier bowl, looping"

[domain]
size_m = [3, 4.5, 3]
voxel_m = 0.03
duration_s = 2.0

# The bowl, the hollow inside it, and the stand.
[[obstacles]]
shape = "cylinder"
position_m = [0, 0.75, 0]
size_m = 0.45
height_m = 0.5

[[obstacles]]
shape = "cylinder"
carve = true
position_m = [0, 0.9, 0]
size_m = 0.38
height_m = 0.5

[[obstacles]]
shape = "cylinder"
position_m = [0, 0.25, 0]
size_m = 0.06
height_m = 0.5

# The coals, inside the bowl.
[[emitters]]
shape = "disc"
position_m = [0, 0.8, 0]
size_m = 0.3
thickness_m = 0.04
start_s = 0.0
end_s = 1000
fuel = 4
temperature_k = 1250
smoke = 0.3
velocity_mps = 0.6
direction = "up"
spread_deg = 30
jitter = 0.6

[solver]
air_limit = 0.85
burn_rate = 10
flame_k = 1700
cooling = 2.5
soot = 0.5
smoke_fade = 3.0
drag = 1.5
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.2

[look]
flame_ramp = [[600, 0.05, 0.0, 0.0], [900, 0.4, 0.03, 0.0], [1200, 0.9, 0.25, 0.02], [1600, 1.0, 0.6, 0.15]]
exposure = 1.6
smoke_colour = [0.06, 0.035, 0.025]
glow = 1.6
soft_light = 0.5

[export]
loop = true
loop_blend_frames = 12
warmup_s = 2.5

Violet portal swirl violet_portal_swirl.pyro.toml

An upright ring of violet flame swirled about its center by a vortex, for a portal or a summoning circle. Loop, up to 6 x 6 m, 2 s loop.

final quality · compiled with Spatial Compiler · Bake summary

violet_portal_swirl.pyro.toml
# A standing ring of violet flame that swirls about its centre, for a portal or a summoning circle.
# The ring emitter is stood upright to face the camera, a vortex turns the gas around it and a pull at
# the centre keeps it from drifting off. Low buoyancy keeps it in place. Loops.
[meta]
name = "violet_portal_swirl"
notes = "Upright ring of violet flame swirled by a vortex, looping"

[domain]
size_m = [6, 6, 4]
voxel_m = 0.04
duration_s = 2.0

# The ring, turned 90 degrees about X so it stands in the plane the front view faces.
[[emitters]]
shape = "ring"
position_m = [0, 2.5, 0]
size_m = 1.4
thickness_m = 0.12
rotation_deg = [90, 0, 0]
start_s = 0.0
end_s = 1000
fuel = 2
temperature_k = 1300
smoke = 0.3
velocity_mps = 0
jitter = 0.4

# The swirl, about the axis through the ring.
[[forces]]
kind = "vortex"
shape = "box"
position_m = [0, 2.5, 0]
size_m = [1.8, 1.8, 0.6]
direction = [0, 0, 1]
strength = 10
max_speed_mps = 3
falloff = 0.4

[[forces]]
kind = "point"
position_m = [0, 2.5, 0]
size_m = 2.0
strength = -4
falloff = 0.5

[solver]
air_limit = 0.8
burn_rate = 6
buoyancy = 0.15
cooling = 2.0
soot = 0.3
smoke_fade = 3.0
drag = 0.8
swirl = 0.9
turbulence = 0.4
turbulence_size_m = 0.3

[look]
flame_ramp = [[700, 0.05, 0.0, 0.1], [1000, 0.3, 0.05, 0.7], [1300, 0.6, 0.3, 1.0], [1700, 0.95, 0.85, 1.0]]
exposure = 2.2
smoke_colour = [0.05, 0.02, 0.07]
glow = 1.2

[[views]]
name = "front"

[[views]]
name = "edge"
yaw_deg = 90

[export]
loop = true
loop_blend_frames = 12
warmup_s = 3.0

Shadow flame shadow_flame.pyro.toml

A dark, sooty flame with a deep red ramp and black smoke hanging in a hood above it, held by a drag pocket. Loop, up to 5 x 7 m, 2 s loop.

final quality · compiled with Spatial Compiler · Bake summary

shadow_flame.pyro.toml
# A dark, sooty flame for a cursed altar or a villain's lair: a deep red ramp, very black smoke that
# hangs in a hood above the fire where a still pocket slows it, and gusts that make it lick. Loops.
[meta]
name = "shadow_flame"
notes = "Deep red ramp, black hanging smoke held by a drag pocket, looping"

[domain]
size_m = [5, 7, 5]
voxel_m = 0.045
duration_s = 2.0

[[emitters]]
shape = "disc"
position_m = [0, 0.15, 0]
size_m = 0.5
start_s = 0.0
end_s = 1000
fuel = 7
temperature_k = 1400
smoke = 0.8
velocity_mps = 1.2
direction = "up"
spread_deg = 25
jitter = 0.6

# A still pocket above the flame, where the smoke slows and hangs.
[[forces]]
kind = "drag"
shape = "box"
position_m = [0, 4.2, 0]
size_m = [1.6, 0.8, 1.6]
strength = 1.5
falloff = 0.6

[[forces]]
kind = "turbulence"
position_m = [0, 1.5, 0]
size_m = 1.2
strength = 6
noise_size_m = 0.4
acts_on = "gas"

[solver]
air_limit = 0.88
burn_rate = 10
cooling = 2.2
soot = 2.5
smoke_fade = 2.0
drag = 1.2
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.4

[look]
flame_ramp = [[700, 0.1, 0.0, 0.0], [1200, 0.5, 0.03, 0.01], [1800, 1.0, 0.25, 0.05]]
exposure = 1.6
smoke_colour = [0.015, 0.01, 0.012]
smoke_density = 1.6
glow = 0.3

[export]
loop = true
loop_blend_frames = 12
warmup_s = 3.0

Spirit wisp trail spirit_wisp_trail.pyro.toml

A small teal flame weaving on an eased path and leaving a fading trail of gas, not particles. One-shot, up to 10 x 7 m, 6.5 s.

final quality · compiled with Spatial Compiler · Bake summary

spirit_wisp_trail.pyro.toml
# A glowing teal wisp weaving through the air and leaving a fading trail, for a guiding spirit or a
# magic missile. It is a small moving flame on an eased path, with a teal ramp; the trail is the gas
# it leaves behind, not particles. One-shot.
[meta]
name = "spirit_wisp_trail"
notes = "Small teal flame on a curved eased path, leaving a trail"

[domain]
size_m = [10, 7, 8]
voxel_m = 0.06
duration_s = 6.5

[[emitters]]
shape = "sphere"
position_m = [[0, -4, 1, 0], [1, -2, 2.2, 1.2], [2, 0, 1.6, -1], [3, 2, 2.6, 0.8], [4, 4, 2, 0]]
size_m = 0.18
start_s = 0.0
end_s = 4.0
fuel = 1.5
temperature_k = 1500
smoke = 0.4
velocity_mps = 0.3
inherit_velocity = 0.2
lumpiness = 0.2

[solver]
air_limit = 0.5
burn_rate = 6
buoyancy = 0.2
cooling = 2.0
soot = 0.2
smoke_fade = 2.0
drag = 0.8
swirl = 0.9
turbulence = 0.3
turbulence_size_m = 0.25

[look]
flame_ramp = [[700, 0.0, 0.05, 0.05], [1000, 0.02, 0.35, 0.3], [1400, 0.2, 0.85, 0.7], [1800, 0.8, 1.0, 0.95]]
exposure = 2.6
smoke_colour = [0.02, 0.06, 0.06]
glow = 1.4

[[views]]
name = "side"

[[views]]
name = "strategy"
pitch_deg = 55

[export]
format = "png16"

Questions

How do I compile a longer smoke column in pyrofx?

Start with smoke_column.pyro.toml and update its export section for 60 fps, even pacing and 2048 px sheets to pack 360 frames across six sheets per channel.

How do I resize a pyrofx starter example without breaking the simulation?

Scale domain.size_m, domain.voxel_m, emitter position_m, size_m, velocity_mps and solver.turbulence_size_m together so the simulation proportions stay balanced.

What is the difference between a single burst and a looping pyrofx example?

Single burst examples like fireball and impact play once over their life, while looping examples like fire and smoke_plume repeat smoothly.