EFFECTS // ROBLOX STUDIO
How to make a window fire in Roblox Studio
Use two ParticleEmitters in Roblox Studio to play a window fire venting flame and smoke from a burning room, one for smoke and one for the glowing flame. Upload your 1024 px, 64-frame textures to each emitter, set FlipbookLayout to Grid8x8 and set FlipbookMode to Loop.
- Godot 4 Available
- Unity Manual setup
- Unreal Engine Manual setup
- Roblox Studio Manual setup
- three.js Available
A draft compile is from $0.05, and new accounts start with $5 of usage.
01 // WHAT YOU GET
What you get for window fire in Roblox Studio
The window fire is a burning room venting flame and smoke through a window. Three obstacles in the spec make the wall and the opening, so the flames curl out and up the way they do from a real window. The effect is about 3.9 m wide and 4.7 m tall and loops every 2 seconds.
You get four PNG sheets of 64 frames, a layout.json with the timing, and previews, which you turn into a smoke texture and a flame texture, each on its own ParticleEmitter.
02 // BY HAND TODAY
Set up the window fire in Roblox Studio by hand
- Ask your agent for the effect (for example "a fire venting from a second-floor window that loops") with
export.tile_px = 128, so each 8 x 8 sheet is 1024 x 1024 px, the largest image Roblox keeps. - A ParticleEmitter takes one texture, so pack the smoke into one image: ask for
export.packto write the light from above (green ofmain_pos.png) into RGB and opacity (alpha ofmain_pos.png) into alpha. For the flame, make a second image on black:main_colour.pngtimes the squared alpha ofmain_neg.png, normalized to the clip's peak (how and why). - Upload each image in the Asset Manager and paste its id into the Texture of its own ParticleEmitter, both on one Attachment in the same part.
- Set FlipbookLayout to Grid8x8 on both emitters and FlipbookMode to Loop, with FlipbookFramerate at 30, the Roblox maximum, so the window fire's 64 frames take 2.1 s instead of 2 s. Set Rate to 0 and emit both from one script call (keep it burning) with matching fixed settings (alignment).
- Flame emitter: LightEmission 1, LightInfluence 0, Brightness
scales.emit_max_hdr. Smoke emitter: LightEmission 0, LightInfluence 1. Set Size on both emitters to the meters per tile inlayout.jsonconverted to studs, a little over 17 studs for the window fire.
03 // ADJUST IT
Adjust the window fire for your scene
Place it against a building so the flames come out of a window in your model. Only the fire and smoke are in the sheets, so your own building model supplies the wall. Ask for a wider window or heavier smoke to match the building.
04 // SETTINGS
Settings in the window fire spec
Three obstacles make the building: a block, the room carved out of it and the window carved through its front. The fire burns on the room floor.
Ask your agent to change these and compile again; the full window_fire spec lists every value.
How do I get a window fire effect for Roblox Studio?
Start from window_fire and ask your agent for a looping fire venting from a raised window. Play the compiled textures in Roblox Studio.
How do I make a Roblox window fire flipbook loop continuously?
Set FlipbookMode to Loop and FlipbookFramerate to 30, keep new particles spawning and give each particle a Lifetime of at least one loop.
How do I make a realistic window fire in Roblox Studio?
Use a simulated room fire instead of painted particles. Three obstacles form the block, the carved room and the window opening where flames vent.
Do the first and last frames of the Roblox window fire loop match?
Yes. The window fire compile blends its last 12 frames into its first, so frame 64 leads straight back to frame 1 every 2 s.
Compile your first effect
You pay per compile and see the price before it runs. New accounts start with $5 of usage.