EFFECTS // ROBLOX STUDIO

How to make a fire whirl in Roblox Studio

Use two ParticleEmitters in Roblox Studio to play a fire whirl that spins flames into a 7 m column and loops every 2 seconds, one for smoke and one for the glowing flame. Upload your 1024 px, 64-frame textures to each emitter, set FlipbookLayout to Grid8x8 and set FlipbookMode to Loop.

  • Godot 4 Available
  • Unity Manual setup
  • Unreal Engine Manual setup
  • Roblox Studio Manual setup
  • three.js Available

A draft compile is from $0.05, and new accounts start with $5 of usage.

FIRE_WHIRLFINAL
First frame of the fire_whirl bake
Fire whirl, 4.4 x 7.1 m, compiled with Spatial Compiler. Spec →

01 // WHAT YOU GET

What you get for fire whirl in Roblox Studio

The fire whirl spins its flames into a tall column. A vortex force in the spec does the spinning, so the twist comes from the simulation and not from rotating a sprite. The column is about 4.4 m wide and 7.1 m tall, and it loops every 2 seconds.

You get four PNG sheets of 64 frames, a layout.json with the timing, and previews, which you turn into a smoke texture and a flame texture, each on its own ParticleEmitter.

02 // BY HAND TODAY

Set up the fire whirl in Roblox Studio by hand

  1. Ask your agent for the effect (for example "a fire whirl like the example with a slower spin") with export.tile_px = 128, so each 8 x 8 sheet is 1024 x 1024 px, the largest image Roblox keeps.
  2. A ParticleEmitter takes one texture, so pack the smoke into one image: ask for export.pack to write the light from above (green of main_pos.png) into RGB and opacity (alpha of main_pos.png) into alpha. For the flame, make a second image on black: main_colour.png times the squared alpha of main_neg.png, normalized to the clip's peak (how and why).
  3. Upload each image in the Asset Manager and paste its id into the Texture of its own ParticleEmitter, both on one Attachment in the same part.
  4. Set FlipbookLayout to Grid8x8 on both emitters and FlipbookMode to Loop, with FlipbookFramerate at 30, the Roblox maximum, so the fire whirl's 64 frames take 2.1 s instead of 2 s. Set Rate to 0 and emit both from one script call (keep it burning) with matching fixed settings (alignment).
  5. Flame emitter: LightEmission 1, LightInfluence 0, Brightness scales.emit_max_hdr. Smoke emitter: LightEmission 0, LightInfluence 1. Set Size on both emitters to the meters per tile in layout.json converted to studs, a little over 25 studs for the fire whirl.

03 // ADJUST IT

Adjust the fire whirl for your scene

It works as a set piece: a burning field, a spell gone wrong, a boss arena. Ask your agent for a slower spin, a thinner column or more smoke at the top, and it changes the vortex and the source in the spec.

04 // SETTINGS

Settings in the fire whirl spec

A vortex force along the column spins the gas, and the fire at its base feeds it. A weaker vortex gives a slower, wider whirl.

Ask your agent to change these and compile again; the full fire_whirl spec lists every value.

06 // FAQ

Questions about fire whirl in Roblox Studio

All questions →

README.ROBLOX_FIRE_WHIRL
How do I get a fire whirl effect for Roblox Studio?

Start from fire_whirl and ask your agent for a fire whirl with a slower spin. Play the compiled textures in Roblox Studio.

How do I make a Roblox fire whirl flipbook loop continuously?

Set FlipbookMode to Loop and FlipbookFramerate to 30, keep new particles spawning and give each particle a Lifetime of at least one loop.

How do I make a realistic fire whirl in Roblox Studio?

Use a simulated whirl instead of painted particles. A vortex force spins the rising gas while fire at the base feeds it.

Do the first and last frames of the Roblox fire whirl loop match?

Yes. The fire whirl compile blends its last 12 frames into its first, so frame 64 leads straight back to frame 1 every 2 s.

Compile your first effect

You pay per compile and see the price before it runs. New accounts start with $5 of usage.

All effects, guides and explainers →