EFFECTS // ROBLOX STUDIO
How to make a steady fire in Roblox Studio
Use two ParticleEmitters in Roblox Studio to play a steady fire about 1.5 m across that loops every 2 seconds, one for smoke and one for the glowing flame. Upload your 1024 px, 64-frame textures to each emitter, set FlipbookLayout to Grid8x8 and set FlipbookMode to Loop.
- Godot 4 Available
- Unity Manual setup
- Unreal Engine Manual setup
- Roblox Studio Manual setup
- three.js Available
A draft compile is from $0.05, and new accounts start with $5 of usage.
01 // WHAT YOU GET
What you get for steady fire in Roblox Studio
The steady fire is the plainest fire example: one source about 1.5 m across that burns in place, with flames and a little smoke rising to about 7 m. The loop is 2 seconds, and the last 12 frames blend into the first, so the wrap does not show.
You get four PNG sheets of 64 frames, a layout.json with the timing, and previews, which you turn into a smoke texture and a flame texture, each on its own ParticleEmitter.
02 // BY HAND TODAY
Set up the steady fire in Roblox Studio by hand
- Ask your agent for the effect (for example "a campfire like the steady fire example but half the size") with
export.tile_px = 128, so each 8 x 8 sheet is 1024 x 1024 px, the largest image Roblox keeps. - A ParticleEmitter takes one texture, so pack the smoke into one image: ask for
export.packto write the light from above (green ofmain_pos.png) into RGB and opacity (alpha ofmain_pos.png) into alpha. For the flame, make a second image on black:main_colour.pngtimes the squared alpha ofmain_neg.png, normalized to the clip's peak (how and why). - Upload each image in the Asset Manager and paste its id into the Texture of its own ParticleEmitter, both on one Attachment in the same part.
- Set FlipbookLayout to Grid8x8 on both emitters and FlipbookMode to Loop, with FlipbookFramerate at 30, the Roblox maximum, so the steady fire's 64 frames take 2.1 s instead of 2 s. Set Rate to 0 and emit both from one script call (keep it burning) with matching fixed settings (alignment).
- Flame emitter: LightEmission 1, LightInfluence 0, Brightness
scales.emit_max_hdr. Smoke emitter: LightEmission 0, LightInfluence 1. Set Size on both emitters to the meters per tile inlayout.jsonconverted to studs, a little over 25 studs for the steady fire.
03 // ADJUST IT
Adjust the steady fire for your scene
Ask your agent to scale it down for a campfire, up for a burning truck, or to add more smoke for burning fuel. A new seed gives you a second fire with the same look that does not flicker in step with the first.
04 // SETTINGS
Settings in the steady fire spec
One emitter burns in place, and the loop settings blend the last 12 frames into the first. Change the emitter size for a smaller or larger fire.
Ask your agent to change these and compile again; the full fire spec lists every value.
How do I get a steady fire effect for Roblox Studio?
Start from fire and ask your agent for a campfire like the steady fire example at half the size. Play the compiled textures in Roblox Studio.
How do I make a Roblox steady fire flipbook loop continuously?
Set FlipbookMode to Loop and FlipbookFramerate to 30, keep new particles spawning and give each particle a Lifetime of at least one loop.
How do I make a realistic steady fire in Roblox Studio?
Use a simulated fire instead of painted particles. One emitter burns in place while loop settings blend the last 12 frames into the first.
Do the first and last frames of the Roblox steady fire loop match?
Yes. The steady fire compile blends its last 12 frames into its first, so frame 64 leads straight back to frame 1 every 2 s.
Compile your first effect
You pay per compile and see the price before it runs. New accounts start with $5 of usage.