EFFECTS // THREE.JS

How to make a steady fire in three.js

In three.js, you can play a steady fire about 1.5 m across that loops every 2 seconds. A snippet loads the packed RGBA sprite sheet on a THREE.Sprite, sets the texture repeat to one eighth, and wraps back to frame 0. Godot 4 gets a ready scene that relights the smoke.

  • Godot 4 Available
  • Unity Manual setup
  • Unreal Engine Manual setup
  • Roblox Studio Manual setup
  • three.js Available

A draft compile is from $0.05, and new accounts start with $5 of usage.

FIREFINAL
First frame of the fire bake
Fire, 4.1 x 7.0 m, compiled with Spatial Compiler. Spec →

01 // WHAT YOU GET

What you get for steady fire in three.js

The steady fire is the plainest fire example: one source about 1.5 m across that burns in place, with flames and a little smoke rising to about 7 m. The loop is 2 seconds, and the last 12 frames blend into the first, so the wrap does not show.

You get four PNG sheets of 64 frames, a layout.json with the timing, and previews, which three.js plays through a small material.

02 // HOW TO

Play the steady fire in three.js

  1. Ask your agent for the effect (for example "a campfire like the steady fire example but half the size") with export.pack writing the light from above into RGB and opacity into alpha, so one PNG holds gray shading you can tint. (main_pos.png as it comes holds three light directions in RGB, not a color.) Load it with TextureLoader and set texture.repeat.set(1 / 8, 1 / 8).
  2. Put it on a THREE.Sprite with a SpriteMaterial (transparent: true, depthWrite: false) so it always faces the camera. For the flame, make a second texture in an image editor, main_colour.png multiplied by the alpha of main_neg.png squared, and draw it on a second sprite with THREE.AdditiveBlending. That texture is normalized, so restore the peak on the flame sprite with material.color.setScalar(emitMax), where emitMax is scales.emit_max_hdr.
  3. Each frame, pick the tile: column i % 8 and row Math.floor(i / 8), then set texture.offset.set(col / 8, 1 - (row + 1) / 8).
  4. Advance i by 32 frames a second, the steady fire's real speed (64 frames in 2 s), and wrap it with i % 64 so it loops.
  5. Set sprite.scale.set(s, s, 1) with s the meters per tile from layout.json, a little over 7 m for the steady fire, so it shows at its real size.

03 // ADJUST IT

Adjust the steady fire for your scene

Ask your agent to scale it down for a campfire, up for a burning truck, or to add more smoke for burning fuel. A new seed gives you a second fire with the same look that does not flicker in step with the first.

04 // SETTINGS

Settings in the steady fire spec

One emitter burns in place, and the loop settings blend the last 12 frames into the first. Change the emitter size for a smaller or larger fire.

Ask your agent to change these and compile again; the full fire spec lists every value.

06 // FAQ

Questions about steady fire in three.js

All questions →

README.THREEJS_STEADY_FIRE
Is there a steady fire effect for three.js?

Yes. Ask your agent for a campfire like the steady fire example but half the size, starting from the fire example.

How do I loop a steady fire sprite sheet in three.js?

Advance a frame counter at 64 frames per 2 seconds, wrap it modulo 64 and set texture.offset from the column and row.

How do I make a realistic steady fire in three.js?

Start from a simulated fire instead of manual particles. One emitter burns in place and blends the last 12 frames into the first.

How do I keep a steady fire in proportion in three.js?

Keep the Sprite square because every tile is square. Set sprite.scale.set(s, s, 1) using the meters per tile from layout.json.

Should the first and last frames of a steady fire loop match?

Yes. The steady fire compile blends its last 12 frames into its first, so frame 64 leads straight back to frame 1 every 2 seconds.

Compile your first effect

You pay per compile and see the price before it runs. New accounts start with $5 of usage.

All effects, guides and explainers →