EFFECTS // THREE.JS

How to make fire in three.js

In three.js, you can play a looping fire, from a burning wreck to a fire whirl or a window fire. A snippet loads the packed RGBA sprite sheet on a THREE.Sprite, sets the texture repeat to one eighth, and wraps back to frame 0. Godot 4 gets a ready scene that relights the smoke.

  • Godot 4 Available
  • Unity Manual setup
  • Unreal Engine Manual setup
  • Roblox Studio Manual setup
  • three.js Available

A draft compile is from $0.05, and new accounts start with $5 of usage.

FIREFINAL
First frame of the fire bake
Fire, 4.1 x 7.0 m, compiled with Spatial Compiler. Spec →

01 // WHAT YOU GET

What you get for fire in three.js

Three fire examples come ready to start from. The steady fire is about 1.5 m across and reads as a burning wreck or a large campfire. The fire whirl spins its flames into a column 7 m tall. The window fire vents flame and smoke out of a burning room. All three loop every 2 seconds.

Each compile is four 2048 px PNG sheets of 64 frames on an 8 x 8 grid, a layout.json with the timing, and previews. The sheets carry lighting from six directions and the flame separately, not one painted color image, so three.js needs a small material to show them.

02 // HOW TO

Play the fire in three.js

  1. Ask your agent for the effect (for example "a campfire about 1 m across that loops") with export.pack writing the light from above into RGB and opacity into alpha, so one PNG holds gray shading you can tint. (main_pos.png as it comes holds three light directions in RGB, not a color.) Load it with TextureLoader and set texture.repeat.set(1 / 8, 1 / 8).
  2. Put it on a THREE.Sprite with a SpriteMaterial (transparent: true, depthWrite: false) so it always faces the camera. For the flame, make a second texture in an image editor, main_colour.png multiplied by the alpha of main_neg.png squared, and draw it on a second sprite with THREE.AdditiveBlending. That texture is normalized, so restore the peak on the flame sprite with material.color.setScalar(emitMax), where emitMax is scales.emit_max_hdr.
  3. Each frame, pick the tile: column i % 8 and row Math.floor(i / 8), then set texture.offset.set(col / 8, 1 - (row + 1) / 8).
  4. Advance i by 32 frames a second, the fire's real speed (64 frames in 2 s), and wrap it with i % 64 so it loops.
  5. Set sprite.scale.set(s, s, 1) with s the meters per tile from layout.json, a little over 7 m for the fire, so it shows at its real size.

03 // REAL OUTPUT

Compare the fire examples

FIRE_WHIRLFINAL
First frame of the fire_whirl bake
Fire whirl, 4.4 x 7.1 m, compiled with Spatial Compiler. Spec →
WINDOW_FIREFINAL
First frame of the window_fire bake
Window fire, 3.9 x 4.7 m, compiled with Spatial Compiler. Spec →

These clips are final-quality compiles of the shipped examples, played from their own sheets. Your agent can start from any of them.

04 // ADJUST IT

Adjust the fire for your scene

Pick the example closest to your scene and ask your agent to change it: a smaller fire for a torch-lit hall, darker smoke for burning oil, or a new seed when two fires sit side by side and should not match.

Each loop runs for as long as the scene needs it, so one compile covers a fire that burns for the whole level.

05 // WHICH ONE

Pick a fire example

  • fire: A steady fire about 1.5 m across, like a burning wreck. Loops, 4.1 x 7.0 m, 2 s loop.
  • fire_whirl: Flames spun into a tall column by a vortex force. Loops, 4.4 x 7.1 m, 2 s loop.
  • window_fire: A burning room venting flame and smoke through a window. Three obstacles make the building. Loops, 3.9 x 4.7 m, 2 s loop.

Each one has its own page: Fire, Fire whirl, Window fire.

07 // FAQ

Questions about fire in three.js

All questions →

README.THREEJS_FIRE
Is there a looping fire effect for three.js?

Yes. Ask your agent for a campfire about 1 m across that loops, starting from the fire, fire_whirl or window_fire example.

How do I import a fire sprite sheet into three.js?

Load the PNG with TextureLoader, set repeat to one eighth on both axes and put it on a SpriteMaterial with transparent true.

How do I randomize the starting frame of several three.js fire sprites?

Give each sprite its own texture with texture.clone() and start its frame counter at a random integer from 0 to 63.

How do I blend flame and smoke in three.js?

Use two sprites. Put the flame on a SpriteMaterial with THREE.AdditiveBlending and the smoke on normal blending, both with depthWrite false.

Should the first and last frames of a fire loop match?

Yes. The fire compile blends its last 12 frames into its first, so frame 64 leads straight back to frame 1 every 2 seconds.

Compile your first effect

You pay per compile and see the price before it runs. New accounts start with $5 of usage.

All effects, guides and explainers →