EFFECTS // THREE.JS

How to make a fire whirl in three.js

In three.js, you can play a fire whirl that spins flames into a 7 m column and loops every 2 seconds. A snippet loads the packed RGBA sprite sheet on a THREE.Sprite, sets the texture repeat to one eighth, and wraps back to frame 0. Godot 4 gets a ready scene that relights the smoke.

  • Godot 4 Available
  • Unity Manual setup
  • Unreal Engine Manual setup
  • Roblox Studio Manual setup
  • three.js Available

A draft compile is from $0.05, and new accounts start with $5 of usage.

FIRE_WHIRLFINAL
First frame of the fire_whirl bake
Fire whirl, 4.4 x 7.1 m, compiled with Spatial Compiler. Spec →

01 // WHAT YOU GET

What you get for fire whirl in three.js

The fire whirl spins its flames into a tall column. A vortex force in the spec does the spinning, so the twist comes from the simulation and not from rotating a sprite. The column is about 4.4 m wide and 7.1 m tall, and it loops every 2 seconds.

You get four PNG sheets of 64 frames, a layout.json with the timing, and previews, which three.js plays through a small material.

02 // HOW TO

Play the fire whirl in three.js

  1. Ask your agent for the effect (for example "a fire whirl like the example with a slower spin") with export.pack writing the light from above into RGB and opacity into alpha, so one PNG holds gray shading you can tint. (main_pos.png as it comes holds three light directions in RGB, not a color.) Load it with TextureLoader and set texture.repeat.set(1 / 8, 1 / 8).
  2. Put it on a THREE.Sprite with a SpriteMaterial (transparent: true, depthWrite: false) so it always faces the camera. For the flame, make a second texture in an image editor, main_colour.png multiplied by the alpha of main_neg.png squared, and draw it on a second sprite with THREE.AdditiveBlending. That texture is normalized, so restore the peak on the flame sprite with material.color.setScalar(emitMax), where emitMax is scales.emit_max_hdr.
  3. Each frame, pick the tile: column i % 8 and row Math.floor(i / 8), then set texture.offset.set(col / 8, 1 - (row + 1) / 8).
  4. Advance i by 32 frames a second, the fire whirl's real speed (64 frames in 2 s), and wrap it with i % 64 so it loops.
  5. Set sprite.scale.set(s, s, 1) with s the meters per tile from layout.json, a little over 7.1 m for the fire whirl, so it shows at its real size.

03 // ADJUST IT

Adjust the fire whirl for your scene

It works as a set piece: a burning field, a spell gone wrong, a boss arena. Ask your agent for a slower spin, a thinner column or more smoke at the top, and it changes the vortex and the source in the spec.

04 // SETTINGS

Settings in the fire whirl spec

A vortex force along the column spins the gas, and the fire at its base feeds it. A weaker vortex gives a slower, wider whirl.

Ask your agent to change these and compile again; the full fire_whirl spec lists every value.

06 // FAQ

Questions about fire whirl in three.js

All questions →

README.THREEJS_FIRE_WHIRL
Is there a fire whirl effect for three.js?

Yes. Ask your agent for a fire whirl with a slower spin, starting from the fire_whirl example and playing the packed sheet.

How do I loop a fire whirl sprite sheet in three.js?

Advance a frame counter at 64 frames per 2 seconds, wrap it modulo 64 and set texture.offset from the column and row.

How do I make a realistic fire whirl in three.js?

Start from a simulated whirl instead of manual particles. A vortex force spins the gas while the fire at its base feeds it.

How do I keep a fire whirl in proportion in three.js?

Keep the Sprite square because every tile is square. Set sprite.scale.set(s, s, 1) using the meters per tile from layout.json.

Should the first and last frames of a fire whirl loop match?

Yes. The fire whirl compile blends its last 12 frames into its first, so frame 64 leads straight back to frame 1 every 2 seconds.

Compile your first effect

You pay per compile and see the price before it runs. New accounts start with $5 of usage.

All effects, guides and explainers →