SPRITE SHEET // SMOKE PLUME

Smoke plume sprite sheet

You get chimney or wreck smoke as a looping sprite sheet: a dark plume that rises and leans with the wind, 64 frames on an 8 x 8 grid, 2048 px square, repeating every 4 seconds. It reaches 10.8 m tall. Ask your agent for one, and in Godot 4 the smoke relights when your sun moves.

  • Godot 4 Available
  • Unity Manual setup
  • Unreal Engine Manual setup
  • Roblox Studio Manual setup
  • three.js Available

A draft compile is from $0.05, and new accounts start with $5 of usage.

SMOKE_PLUMEFINAL
First frame of the smoke_plume bake
Smoke plume, 7.0 x 10.8 m, compiled with Spatial Compiler. Spec →

01 // WHAT YOU GET

A 4 second plume that leans downwind

The smoke rises from a warm patch on the ground with no flame, and a steady 1.2 m/s wind bends it to one side as it climbs. At its largest it covers 7.0 x 10.8 m. The loop is 4 seconds long, twice the fire loops, at 16 frames a second.

The source sits off center, so the plume has room to lean across the frame. Before the first frame the compile runs for 6 seconds, so the plume has reached its full height when the loop starts.

Smoke without flame writes three sheets: two lighting sheets with the opacity, and one for motion and depth. Six-way lighting, lighting precomputed from six directions so the smoke can be relit, lets Godot 4 shade the plume from your sun.

02 // WIND

Set the wind to change the lean

Wind is one setting, a speed in meters per second along each axis. With no wind the smoke rises as a straight column, and a stronger wind makes the plume lean further.

The lean is precomputed in, so it points one way in the sheet. To lean the other way, ask your agent for wind in the other direction, because mirroring the sheet would swap its left and right lighting.

03 // HOW TO

Get a plume for your scene

  1. Connect your agent to Spatial Compiler with an API key, using MCP, the protocol your agent uses to call tools.
  2. Describe the source and the weather: a thin plume from a cabin chimney on a still day, or black smoke from a tank wreck in a crosswind.
  3. For darker or paler smoke, your agent changes the smoke color, and for a longer loop it lengthens the clip.
  4. In Godot 4, have it wire the compile, then place the scene's origin at the chimney top or the wreck.

04 // ENGINES

The plume in other engines

By hand, play it as a looping 8 x 8 flipbook with a 4 second cycle: Start Lifetime in Unity, Lifetime in Roblox Studio, the particle lifetime in Niagara. It uses plain alpha blending, since it has no flame layer.

06 // FAQ

Smoke plume questions

All questions →

README.SMOKE_PLUME_SPRITE_SHEET
How do I light smoke plume flipbook particles with Unreal Engine scene lighting?

Use a lit Translucent material so scene lights shade the quad, while Godot uses the six way sheets for directional relighting.

Should smoke plume use additive or normal alpha blending in three.js?

Use THREE.NormalBlending with transparent true and depthWrite false since the plume has no flame layer.

Can I use the smoke plume sprite sheet in Unity?

Yes. Request one packed RGBA sheet with top light in RGB and opacity in alpha, then play it at 8 by 8 over 4 seconds.

What frame rate should I use for a smoke plume flipbook?

Play the plume at 16 frames a second, covering 64 frames over 4 seconds while the Godot shader blends between frames.

Compile your first effect

You pay per compile and see the price before it runs. New accounts start with $5 of usage.

All effects, guides and explainers →