EFFECTS // UNITY

How to make a smoke plume in Unity

In Unity, you can play a smoke plume that leans with the wind and loops every 4 seconds. Your agent makes PNG sprite sheets of 64 frames, and the Particle System's Texture Sheet Animation, with Tiles set to 8 by 8, plays them as a loop.

  • Godot 4 Available
  • Unity Manual setup
  • Unreal Engine Manual setup
  • Roblox Studio Manual setup
  • three.js Available

A draft compile is from $0.05, and new accounts start with $5 of usage.

SMOKE_PLUMEFINAL
First frame of the smoke_plume bake
Smoke plume, 7.0 x 10.8 m, compiled with Spatial Compiler. Spec →

01 // WHAT YOU GET

What you get for smoke plume in Unity

The smoke plume rises from a source on the ground and leans with the wind, about 7 m wide and 10.8 m tall. It loops every 4 seconds, so it can run for as long as something keeps burning. The lighting sheets let your engine relight it from any sun angle.

You get three PNG sheets of 64 frames, a layout.json with the timing, and previews, which Unity plays through a small material.

02 // BY HAND TODAY

Set up the smoke plume in Unity by hand

  1. Ask your agent for the effect (for example "a chimney smoke plume leaning to the left that loops") and download the output folder. Import main_pos.png and main_neg.png with Wrap Mode set to Clamp and Alpha Is Transparency off. They are data your material reads, not finished pictures, and the alpha of main_neg.png holds flame brightness, which that option would treat as transparency.
  2. Make a material for a Particle System. The quick setup uses the alpha of main_pos.png as opacity and its green channel (light from above) as brightness, tinted with your smoke color. Shader Graph's Flipbook node or a small custom shader can read the sheets.
  3. In the Texture Sheet Animation module, set Mode to Grid, Tiles X and Y to 8 and Animation to Whole Sheet.
  4. Turn Looping on, set Start Lifetime to 4 s and keep Frame over Time a linear curve from 0 to 1 with Cycles 1 (the curve is normalized over the particle's lifetime), so each particle plays the smoke plume loop once per lifetime and new particles keep it going.
  5. Keep the particle square and set its size to the meters per tile in layout.json, a little over 10.8 m for the smoke plume, so it shows at its real scale.

03 // ADJUST IT

Adjust the smoke plume for your scene

Use it over burning wrecks, chimneys and distant fires. Ask your agent for less lean on a calm day, thicker smoke for burning fuel or white steam instead of grey smoke.

04 // SETTINGS

Settings in the smoke plume spec

A steady smoke source and a sideways wind make the lean, and the loop settings blend the end into the start.

Ask your agent to change these and compile again; the full smoke_plume spec lists every value.

06 // FAQ

Questions about smoke plume in Unity

All questions →

README.UNITY_SMOKE_PLUME
Is there a smoke plume effect for Unity?

Start from the smoke plume example and ask your agent for chimney smoke leaning with the wind, then play it in Unity.

How do I loop a smoke plume flipbook continuously in Unity?

Turn Looping on in the Main module and match Start Lifetime to 4 s so the blended last frames wrap cleanly.

How do I make a realistic smoke plume in Unity?

Use a simulated plume instead of manual particles. A steady smoke source and sideways wind create the lean across the 4 s loop.

How do I keep the smoke plume in proportion in Unity?

Keep the particle square because every tile is square. Set 3D Start Size from meters per tile in layout.json, just over 10.8.

How many frames should a smoke plume effect use in Unity?

The smoke plume compile uses 64 frames over a 4 s loop, where slow smoke and frame blending keep motion smooth.

Compile your first effect

You pay per compile and see the price before it runs. New accounts start with $5 of usage.

All effects, guides and explainers →