GUIDE // ROBLOX STUDIO
How to set the flipbook framerate in a Roblox ParticleEmitter
Set FlipbookFramerate to your sheet's frame count divided by the clip's length, up to 30 frames per second, the most Roblox allows. A 64 frame, 4 second smoke loop plays at 16. A 2 second fire would need 32, so at 30 it runs about 7% slower. Equal minimum and maximum values give a steady speed.
- Godot 4 Available
- Unity Manual setup
- Unreal Engine Manual setup
- Roblox Studio Manual setup
- three.js Available
A draft compile is from $0.05, and new accounts start with $5 of usage.
01 // THE NUMBERS
Rates for the example effects
Every example compile has 64 frames. For the loops, divide 64 by the length; layout.json records the rate and the frame times.
- Fire, fire whirl and window fire: 2 s loops that would need 32 frames per second. Set 30, the maximum, and each loop takes 2.13 s.
- Smoke plume: a 4 s loop, so 16 frames per second.
- Fireball (4 s), impact (3.2 s), smoke column (6 s) and dust ring (3 s) are one-shots. Use OneShot mode and set Lifetime to the length; the framerate does not apply. OneShot spaces the frames evenly, so ask for these with
export.pacing = "even"instead of the examples' extra frames at the start.
02 // HOW TO
Set and vary the rate
- Select the ParticleEmitter and set FlipbookMode to Loop, PingPong or Random, the modes that use the framerate.
- Enter the same number twice in FlipbookFramerate, such as 16 and 16 for the smoke plume, or 30 and 30 for a fire.
- For a little variety between particles, use a narrow range such as 14 to 18 for the plume. Keep the top of the range at 30 or below, the Roblox maximum.
local emitter = workspace.Chimney.ParticleEmitter
emitter.FlipbookMode = Enum.ParticleFlipbookMode.Loop
emitter.FlipbookFramerate = NumberRange.new(14, 18) -- about 16 on average, the 4 s smoke plume
emitter.FlipbookBlendFrames = true -- cross-fade between frames
03 // REAL OUTPUT
A slower sheet at 16 frames per second
The smoke plume spends about twice as long on each frame as a fire at 30, which suits its slow drift.
04 // WHY IT MATTERS
Low rates and frame blending
Roblox swaps each frame whole unless you turn on FlipbookBlendFrames, which cross-fades every frame into the next as a plain mix of two frames. Blending along motion vectors takes a custom shader, and Roblox particles have none. At 16 frames per second, slow smoke looks smooth with blending on, while fast fire at 16 still looks soft and doubled. To slow a fire down, ask your agent for a slower fire instead of lowering the framerate.
How do I set the flipbook framerate in a Roblox ParticleEmitter?
Set FlipbookFramerate in Properties or with NumberRange.new(16) in a script. Loop, PingPong and Random modes use this rate up to 30 frames per second.
How do I enable frame blending for smoother Roblox flipbook animation?
Turn on FlipbookBlendFrames on the ParticleEmitter to crossfade each frame into the next. It smooths slow smoke using a plain mix rather than motion guided blending.
What frame rate should I use for a Roblox flipbook?
Use the sheet frame count divided by clip length up to 30 frames per second. A 64 frame 4 second smoke loop plays at 16.
Why does my Roblox flipbook look choppy?
The framerate is too low for the motion or the sheet has too few frames. Enable FlipbookBlendFrames and keep the rate near the sheet rate up to 30.
Compile your first effect
You pay per compile and see the price before it runs. New accounts start with $5 of usage.