GUIDE // ANY ENGINE

How many frames a smoke effect should use

Smoke moves slowly, so 16 to 64 frames usually covers it, played at 12 to 20 frames per second. Spend your frames on length rather than rate: a longer loop repeats less often, which matters more for a plume that stays on screen for minutes. Blending between frames lets smoke hold up at the low end of that range.

  • Godot 4 Available
  • Unity Manual setup
  • Unreal Engine Manual setup
  • Roblox Studio Manual setup
  • three.js Available

A draft compile is from $0.05, and new accounts start with $5 of usage.

SMOKE_PLUMEFINAL
First frame of the smoke_plume bake
Smoke plume, 7.0 x 10.8 m, compiled with Spatial Compiler. Spec →

01 // WHY SMOKE IS DIFFERENT

Smoke changes slowly and stays on screen

Fire changes shape many times a second. Smoke rolls and spreads over seconds, so the change from one frame to the next is small and a low rate still reads as smooth, especially with blending between frames.

Smoke gives itself away by repeating. A chimney plume that loops every second shows the same puff 60 times a minute. Stretching the loop to 4 or 6 seconds at a lower rate costs the same number of frames and hides the cycle.

02 // BY KIND

Looping plumes and one-shot columns

  • Looping plume or chimney: 32 to 64 frames over 3 to 6 seconds.
  • One-shot column after a blast: 32 to 64 frames over 4 to 6 seconds, with the last frames fading to nothing.
  • Small puffs on particles: 16 frames, with random start frames and rotation doing the rest.

03 // REAL OUTPUT

Frame counts in the example smoke compiles

SMOKE_COLUMNFINAL
First frame of the smoke_column bake
Smoke column, 8.2 x 9.9 m, compiled with Spatial Compiler. Spec →

The example smoke plume is a 4 second loop in 64 frames, 16 frames per second. The example smoke column plays once over 5.0 seconds in the same 64 frames, with more of them spent on its early burst. Both carry motion vectors for blending, so the low rate does not step. Your agent can compile a longer loop or a different grid for your scene.

05 // FAQ

Smoke frame questions

All questions →

README.FRAMES_FOR_SMOKE_EFFECT
How many frames should a smoke effect use?

Use 16 to 64 frames for most smoke effects. Spend higher frame counts on a longer loop rather than a faster playback rate.

How many frames does a looping smoke plume need?

Use enough frames for 3 to 6 seconds at 12 to 20 frames per second. 64 frames over 4 seconds is a common middle.

What frame rate should smoke play at?

Play most smoke at 12 to 20 frames per second or lower with blending between frames. Hot smoke near fire uses the top end.

How do I make smoke rise, expand and gradually disappear?

Compile it into the frames with the last frames fading out, then add upward velocity and growing scale on the particle.

Compile your first effect

You pay per compile and see the price before it runs. New accounts start with $5 of usage.

All effects, guides and explainers →