PLAYGROUND // pyrofx
Try every effect free
Pick an effect, adjust it and see what a draft costs before you sign up.
When you like the result, get a free API key and compile it in the console Playground. A draft is from $0.05, and checking the price is free.
Export presets
Smoke column at 60 fps on several sheets
[export]
pacing = "even"
output_fps = 60
sheet_px = 2048
Smoke column under moonlight
light=moon
MoonFireball
A fuel explosion that bursts from the ground and rolls upward. One-shot, 9.4 x 13.4 m, 3.7 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A ground burst that swells, rolls and rises. One-shot.
[meta]
name = "fireball"
notes = "Ground burst that swells, rolls and rises"
[domain]
size_m = [12, 16, 12]
voxel_m = 0.08
duration_s = 4.0
[[emitters]]
shape = "sphere"
position_m = [0, 0.7, 0]
size_m = 1.2
start_s = 0.0
end_s = 0.18
fuel = 5
temperature_k = 1900
smoke = 1.5
velocity_mps = 7
[solver]
# Burning needs air, so the ball burns at its rolling surface instead of all at once.
air_limit = 0.88
burn_rate = 10
smoke_fade = 1.1
[look]
exposure = 1.2
[export]
pacing = "front"
Impact
A shell hitting dry ground: flash, thrown earth, a little smoke. Three emitters in one box. One-shot, 3.5 x 2.8 m, 2.0 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A shell hitting dry ground: a brief flash, earth thrown up and outward, a little smoke. One-shot.
# Three emitters in one box: the flash is hot and short; the dust is cold, so it falls back.
[meta]
name = "impact"
notes = "Mortar or tank shell impact on dry ground, about 4 m wide"
[domain]
size_m = [9, 8, 9]
voxel_m = 0.05
duration_s = 3.2
substeps = 3
# The flash. Little fuel and a short burn, so its heat does not carry the dust up as a column.
[[emitters]]
shape = "sphere"
position_m = [0, 0.3, 0]
size_m = 0.4
start_s = 0.0
end_s = 0.06
fuel = 3
temperature_k = 1900
smoke = 2.0
velocity_mps = 6
direction = "radial"
# Earth thrown up and outward in a wide cone.
[[emitters]]
shape = "sphere"
position_m = [0, 0.25, 0]
size_m = 0.4
start_s = 0.0
end_s = 0.15
fuel = 0
temperature_k = 293
dust = 12
velocity_mps = 11
direction = "up"
spread_deg = 120
jitter = 0.6
# The skirt thrown outward along the ground.
[[emitters]]
shape = "ring"
position_m = [0, 0.2, 0]
size_m = 0.5
start_s = 0.0
end_s = 0.12
fuel = 0
temperature_k = 293
dust = 10
velocity_mps = 8
direction = "radial"
jitter = 0.6
[solver]
burn_rate = 30
cooling = 8
air_limit = 0.5
buoyancy = 0.3
smoke_fade = 1.4
swirl = 0.6
turbulence = 0.5
turbulence_size_m = 0.4
turbulence_where = "moving"
drag = 0.9
[look]
exposure = 2.5
smoke_colour = [0.05, 0.05, 0.05] # colours are linear light: 0.2 already shows as mid grey
dust_colour = [0.13, 0.09, 0.055] # dark dry earth
[export]
pacing = "front"
Smoke column
Smoke left after a burst. It climbs, spreads and thins. One-shot, 8.2 x 9.9 m, 5.0 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A burst of dark smoke that climbs, spreads and thins away. One-shot.
[meta]
name = "smoke_column"
notes = "Smoke burst that climbs and thins away"
[domain]
size_m = [14, 20, 14]
voxel_m = 0.1
duration_s = 6.0
[[emitters]]
shape = "sphere"
position_m = [0, 0.8, 0]
size_m = 1.0
start_s = 0.0
end_s = 0.8
fuel = 0
temperature_k = 700
smoke = 6
velocity_mps = 3
direction = "up"
spread_deg = 50
jitter = 0.5
[solver]
cooling = 0.3
smoke_fade = 0.75
swirl = 0.7
turbulence = 0.5
turbulence_size_m = 1.2
turbulence_where = "moving"
[export]
pacing = "front"
channels = ["six_way", "motion", "depth"]
Fire
A steady fire about 1.5 m across, like a burning wreck. Loop, 4.1 x 7.0 m, 2 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A steady fire about a metre and a half across. Loops.
[meta]
name = "fire"
notes = "Steady ground fire, looping"
[domain]
# 8 m deep: at 6 m faint gas reached the +z face from frame 9 (DOMAIN_CLIPPING at final quality).
size_m = [6, 8, 8]
voxel_m = 0.05
duration_s = 2.0
[[emitters]]
shape = "disc"
position_m = [0, 0.15, 0]
size_m = 0.7
start_s = 0.0
end_s = 1000
fuel = 6
temperature_k = 1500
smoke = 0.2
velocity_mps = 1.5
direction = "up"
spread_deg = 25
jitter = 0.6
[solver]
# Burning needs air, so the flames lick up the outside of the fuel instead of filling it.
air_limit = 0.88
burn_rate = 12
# Drag stands in for the air a real fire pulls in, which slows the column; the smoke is gone before the box top.
cooling = 2.5
soot = 0.35
smoke_fade = 4.5
drag = 1.5
swirl = 0.8
turbulence = 0.7
turbulence_size_m = 0.5
[look]
exposure = 2.6
smoke_density = 0.6
[export]
loop = true
loop_blend_frames = 12
warmup_s = 2.5
Fire whirl
Flames spun into a tall column by a vortex force. Loop, 4.4 x 7.1 m, 2 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A fire spun into a tall, narrow column by a vortex along its axis. Loops.
[meta]
name = "fire_whirl"
notes = "Fire whirl: a ground fire inside a spinning column, looping"
[domain]
size_m = [7, 10, 7]
substeps = 2
voxel_m = 0.05
duration_s = 2.0
[[emitters]]
shape = "disc"
position_m = [0, 0.15, 0]
size_m = 0.7
start_s = 0.0
end_s = 1000
fuel = 6
temperature_k = 1500
smoke = 0.2
velocity_mps = 1.5
direction = "up"
spread_deg = 25
jitter = 0.6
# The spin: around the vertical axis, up the whole column, on air and gas alike.
[[forces]]
kind = "vortex"
shape = "box"
position_m = [0, 4, 0]
size_m = [1.3, 4, 1.3]
direction = [0, 1, 0]
strength = 14
max_speed_mps = 4
falloff = 0.4
# Air drawn in at the foot, which is what keeps a real whirl narrow.
[[forces]]
kind = "point"
position_m = [0, 1.2, 0]
size_m = 2.0
strength = -6
falloff = 0.6
[solver]
air_limit = 0.88
burn_rate = 12
cooling = 2.5
soot = 0.35
smoke_fade = 8
drag = 1.5
swirl = 0.8
turbulence = 0.5
turbulence_size_m = 0.5
[look]
exposure = 2.6
smoke_density = 0.6
[export]
loop = true
loop_blend_frames = 12
warmup_s = 3.0
Window fire
A burning room venting flame and smoke through a window. Three obstacles make the building. Loop, 3.9 x 4.7 m, 2 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A room on fire behind a wall: flame and smoke pour out of the window and climb the wall. Loops.
# The building is three obstacles: a block, the room carved out of it, the window carved through
# its front. The camera looks at the front of the wall; what burns inside shows only through the
# window, because the block holds out the gas behind it.
[meta]
name = "window_fire"
notes = "Fire venting from a window and up the wall above it, looping"
[domain]
size_m = [5, 8, 5]
voxel_m = 0.05
duration_s = 2.0
# The building: fills the back of the box from the floor to the top. Its front is at Z = -0.5,
# which leaves 3 m of open air in front for the flame to roll out into.
[[obstacles]]
shape = "box"
position_m = [0, 4, -1.5]
size_m = [2.5, 4, 1.0]
# The room inside it, with a wall 0.2 m thick in front.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 1.3, -1.5]
size_m = [1.3, 1.1, 0.8]
# The window through that wall.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 1.5, -0.6]
size_m = [0.7, 0.65, 0.25]
# The fire on the floor of the room, behind the window. It is kept clear of the wall: an emitter
# fills its whole shape, so one that pokes through a wall also burns on the far side of it.
[[emitters]]
shape = "disc"
position_m = [0, 0.4, -1.3]
size_m = 0.5
start_s = 0.0
end_s = 1000
fuel = 9
temperature_k = 1500
smoke = 0.3
velocity_mps = 1.0
direction = "up"
spread_deg = 30
jitter = 0.6
[solver]
air_limit = 0.6
burn_rate = 12
# Burning in a closed room pushes the gas out of its one opening. At 1 it leaves as a level jet
# 3 m long; at 0.8 it rolls out of the window and climbs the wall.
expansion = 0.8
cooling = 1.5
soot = 0.5
smoke_fade = 3.5
drag = 1.5
swirl = 0.8
turbulence = 0.7
turbulence_size_m = 0.5
[look]
exposure = 2.0
smoke_density = 0.8
[export]
loop = true
loop_blend_frames = 12
warmup_s = 4.0
Smoke plume
Chimney or wreck smoke leaning with the wind. Loop, 7.0 x 10.8 m, 4 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# Dark smoke rising from a wreck and leaning with the wind. Loops.
[meta]
name = "smoke_plume"
notes = "Wreck smoke leaning downwind, looping"
[domain]
size_m = [14, 18, 13]
voxel_m = 0.1
duration_s = 4.0
[[emitters]]
shape = "disc"
position_m = [-3, 0.3, 0]
size_m = 0.8
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 520
smoke = 5
velocity_mps = 1.5
direction = "up"
spread_deg = 30
jitter = 0.5
[solver]
cooling = 0.25
smoke_fade = 0.45
swirl = 0.8
turbulence = 0.2
turbulence_size_m = 1.2
turbulence_where = "moving"
wind_mps = [1.2, 0, 0]
drag = 0.3
[export]
loop = true
loop_blend_frames = 12
warmup_s = 6.0
channels = ["six_way", "motion", "depth"]
Dust ring
A ring of dust kicked out by a blast or landing. One-shot, 10.5 x 2.2 m, 2.1 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# The ring of dust a blast kicks out along the ground. One-shot.
[meta]
name = "dust_ring"
notes = "Ground dust thrown outward by a blast"
[domain]
size_m = [20, 5, 20]
voxel_m = 0.1
duration_s = 3.0
[[emitters]]
shape = "ring"
position_m = [0, 0.3, 0]
size_m = 1.5
start_s = 0.0
end_s = 0.15
fuel = 0
temperature_k = 293
smoke = 0
dust = 12
velocity_mps = 14
direction = "radial"
jitter = 0.6
[solver]
buoyancy = 0.4
smoke_fade = 1.4
swirl = 0.5
turbulence = 0.6
turbulence_size_m = 0.6
turbulence_where = "moving"
drag = 0.8
[[views]]
name = "main"
pitch_deg = 35
[export]
pacing = "front"
channels = ["six_way", "motion", "depth"]
Staged fuel explosion
A fuel depot going up in stages: flash, main fireball, a second tank half a second later, a dust skirt and hanging smoke. One-shot, 16 x 18 m, 6 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A fuel depot going up in stages: a white flash, the main fireball swelling, a second tank bursting
# half a second later off to one side, a dust skirt along the ground and smoke left hanging. One-shot.
[meta]
name = "staged_fuel_explosion"
notes = "Multi-stage fuel explosion: flash, main fireball, secondary burst, dust skirt, lingering smoke"
[domain]
size_m = [16, 18, 16]
voxel_m = 0.1
duration_s = 6.0
substeps = 3
# Stage 1: the flash. Small, very hot, gone in a twentieth of a second.
[[emitters]]
shape = "sphere"
position_m = [0, 0.6, 0]
size_m = 0.6
start_s = 0.0
end_s = 0.05
fuel = 3
temperature_k = 2400
velocity_mps = 9
lumpiness = 0.2
# Stage 2: the main fireball. The fuel is keyed so the ball swells hard, then starves.
[[emitters]]
shape = "sphere"
position_m = [0, 0.9, 0]
size_m = 1.3
start_s = 0.02
end_s = 0.35
fuel = [[0.02, 6], [0.2, 4], [0.35, 0]]
temperature_k = 1900
smoke = 1.5
velocity_mps = 7
lumpiness = 0.6
# Stage 3: a second tank bursting off to one side, half a second later.
[[emitters]]
shape = "sphere"
position_m = [2.6, 0.7, 1.2]
size_m = 0.8
start_s = 0.5
end_s = 0.7
fuel = 4.5
temperature_k = 1850
smoke = 1.2
velocity_mps = 5.5
lumpiness = 0.7
# The dust skirt thrown out along the ground by the first shock.
[[emitters]]
shape = "ring"
position_m = [0, 0.25, 0]
size_m = 1.4
thickness_m = 0.2
start_s = 0.0
end_s = 0.12
fuel = 0
temperature_k = 293
dust = 10
velocity_mps = 13
direction = "radial"
jitter = 0.6
# The shock: a tenth of a second of expansion shoves the air outward.
[[forces]]
kind = "expand"
shape = "sphere"
position_m = [0, 0.8, 0]
size_m = 3.0
strength = [[0.0, 4.0], [0.1, 0.0]]
start_s = 0.0
end_s = 0.12
# A smaller shock for the second tank.
[[forces]]
kind = "expand"
shape = "sphere"
position_m = [2.6, 0.7, 1.2]
size_m = 1.8
strength = [[0.5, 3.0], [0.58, 0.0]]
start_s = 0.5
end_s = 0.6
[solver]
air_limit = 0.88
burn_rate = 10
expansion = 1.2
cooling = 1.2
smoke_fade = 0.9
swirl = 0.8
turbulence = 0.5
turbulence_size_m = 0.9
[look]
exposure = 1.3
smoke_colour = [0.05, 0.045, 0.04]
dust_colour = [0.15, 0.11, 0.07]
[[views]]
name = "side"
[[views]]
name = "strategy"
pitch_deg = 55
[export]
pacing = "front"
Chain detonation
Four charges along a line, a fifth of a second apart, each with its own short shock. One-shot, 20 x 12 m, 5 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# Four charges going off in a row, a fifth of a second apart, each with its own shock. One-shot.
# The charges sit along X, so the side view sees the whole line.
[meta]
name = "chain_detonation"
notes = "Four staggered charges along a line, each with a short shock"
[domain]
size_m = [20, 12, 10]
voxel_m = 0.08
duration_s = 5.0
substeps = 3
[[emitters]]
shape = "sphere"
position_m = [-6, 0.6, 0]
size_m = 0.7
start_s = 0.0
end_s = 0.12
fuel = 5
temperature_k = 1900
smoke = 1.2
dust = 3
velocity_mps = 7
[[emitters]]
shape = "sphere"
position_m = [-2, 0.6, 0.4]
size_m = 0.7
start_s = 0.2
end_s = 0.32
fuel = 5
temperature_k = 1900
smoke = 1.2
dust = 3
velocity_mps = 7
[[emitters]]
shape = "sphere"
position_m = [2, 0.6, -0.3]
size_m = 0.7
start_s = 0.4
end_s = 0.52
fuel = 5
temperature_k = 1900
smoke = 1.2
dust = 3
velocity_mps = 7
# The last charge is the largest.
[[emitters]]
shape = "sphere"
position_m = [6, 0.7, 0]
size_m = 0.9
start_s = 0.6
end_s = 0.76
fuel = 6
temperature_k = 1950
smoke = 1.5
dust = 4
velocity_mps = 8
[[forces]]
kind = "expand"
position_m = [-6, 0.6, 0]
size_m = 1.8
strength = 3.5
start_s = 0.0
end_s = 0.08
[[forces]]
kind = "expand"
position_m = [-2, 0.6, 0.4]
size_m = 1.8
strength = 3.5
start_s = 0.2
end_s = 0.28
[[forces]]
kind = "expand"
position_m = [2, 0.6, -0.3]
size_m = 1.8
strength = 3.5
start_s = 0.4
end_s = 0.48
[[forces]]
kind = "expand"
position_m = [6, 0.7, 0]
size_m = 2.2
strength = 4.0
start_s = 0.6
end_s = 0.7
[solver]
air_limit = 0.85
burn_rate = 12
cooling = 1.5
smoke_fade = 1.2
swirl = 0.7
turbulence = 0.5
turbulence_size_m = 0.7
[look]
exposure = 1.4
smoke_colour = [0.05, 0.05, 0.05]
dust_colour = [0.14, 0.1, 0.06]
[[views]]
name = "side"
[[views]]
name = "strategy"
pitch_deg = 55
[export]
pacing = "front"
# The last second only thins smoke; leave it out of the sheet.
end_s = 4.2
Airburst
A shell bursting high in the air with a dark smoke shell. A second view looks up at it from the ground. One-shot, 14 x 16 m, 4.5 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A shell bursting high in the air: a flash, a ball of fire that swells fast and rolls, and a dark
# smoke shell left drifting. Nothing touches the ground. One-shot.
# A second view looks up at it from below, as a player on the ground would.
[meta]
name = "airburst"
notes = "High air burst with a smoke shell; side view and a low view looking up"
[domain]
size_m = [14, 16, 14]
voxel_m = 0.1
duration_s = 4.5
[[emitters]]
shape = "sphere"
position_m = [0, 8, 0]
size_m = 0.5
start_s = 0.0
end_s = 0.05
fuel = 3
temperature_k = 2400
velocity_mps = 10
lumpiness = 0.2
[[emitters]]
shape = "sphere"
position_m = [0, 8, 0]
size_m = 1.0
start_s = 0.0
end_s = 0.15
fuel = 5
temperature_k = 1900
smoke = 2.5
velocity_mps = 8
lumpiness = 0.7
# The blast wave clears the air around the burst.
[[forces]]
kind = "expand"
position_m = [0, 8, 0]
size_m = 2.5
strength = [[0.0, 5.0], [0.08, 0.0]]
start_s = 0.0
end_s = 0.1
[solver]
air_limit = 0.85
burn_rate = 14
# A burst of expansion while the fuel burns, then normal.
expansion = [[0, 2], [0.4, 1]]
cooling = 1.8
smoke_fade = 0.8
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.7
[look]
exposure = 1.5
smoke_colour = [0.03, 0.03, 0.03]
[[views]]
name = "side"
[[views]]
name = "below"
pitch_deg = -30
[export]
pacing = "front"
Vehicle cook-off
A blast out of a vehicle hatch, then a deck fire that catches, burns and starves. The hull and turret are obstacles, so a model can fill the hole. One-shot, 10 x 12 m, 8 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A vehicle cooking off: a blast out of the top hatch, then a fire that settles on the deck and
# burns down. The hull and turret are obstacles, so the flame wraps the hull and the game's own
# model fills the hole they leave in the sheet. One-shot.
[meta]
name = "vehicle_cookoff"
notes = "Hatch blast, then a deck fire that burns down; hull and turret are obstacles"
[domain]
size_m = [10, 12, 10]
voxel_m = 0.07
duration_s = 8.0
# The hull, turned 15 degrees so the side view sees some of its length.
[[obstacles]]
shape = "box"
position_m = [0, 0.7, 0]
size_m = [1.6, 0.6, 0.9]
rotation_deg = [0, 15, 0]
# The turret.
[[obstacles]]
shape = "cylinder"
position_m = [0.6, 1.5, 0]
size_m = 0.5
height_m = 0.4
# The hatch blast, from just above the turret.
[[emitters]]
shape = "sphere"
position_m = [0.6, 2.1, 0]
size_m = 0.35
start_s = 0.0
end_s = 0.15
fuel = 6
temperature_k = 1950
smoke = 2.0
velocity_mps = 9
direction = "up"
spread_deg = 40
# The deck fire. It catches, burns steady, then starves.
[[emitters]]
shape = "disc"
position_m = [-0.7, 1.45, 0]
size_m = 0.55
thickness_m = 0.06
start_s = 0.3
end_s = 6.5
fuel = [[0.3, 0], [0.8, 6], [4, 5], [6.5, 0]]
temperature_k = 1500
smoke = [[0.3, 0.2], [4, 0.6], [6.5, 0]]
velocity_mps = 1.2
direction = "up"
spread_deg = 25
jitter = 0.6
[solver]
air_limit = 0.85
burn_rate = 12
cooling = 2.2
soot = 0.5
smoke_fade = 2.0
drag = 1.2
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.5
wind_mps = [0.6, 0, 0]
[look]
exposure = 2.2
smoke_density = 0.8
[export]
pacing = "front"
Wall breach
A breaching charge behind a wall, venting through a carved doorway toward the camera, with dust off the frame and a short jet. One-shot, 10 x 8 m, 3.5 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A breaching charge behind a wall: the blast punches out through the doorway toward the camera,
# throwing dust, while the rest of the wall holds. One-shot.
# The wall spans the box, so the only way through is the carved doorway.
[meta]
name = "wall_breach"
notes = "Breach charge venting through a doorway; wall and doorway are obstacles"
[domain]
size_m = [10, 8, 10]
voxel_m = 0.06
duration_s = 3.5
substeps = 3
# The wall, from floor to ceiling, side to side.
[[obstacles]]
shape = "box"
position_m = [0, 4, 0]
size_m = [5, 4, 0.25]
# The doorway through it.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 1.1, 0]
size_m = [0.8, 1.1, 0.4]
# The charge, a metre behind the wall.
[[emitters]]
shape = "sphere"
position_m = [0, 1.0, -1.0]
size_m = 0.5
start_s = 0.0
end_s = 0.1
fuel = 6
temperature_k = 1950
smoke = 2.0
velocity_mps = 8
# Dust knocked off the frame of the doorway.
[[emitters]]
shape = "box"
position_m = [0, 1.1, 0.5]
size_m = [0.8, 1.0, 0.15]
start_s = 0.03
end_s = 0.2
fuel = 0
temperature_k = 293
dust = 9
velocity_mps = 7
direction = [0, 0.3, 1]
spread_deg = 40
jitter = 0.6
[[forces]]
kind = "expand"
position_m = [0, 1.0, -1.0]
size_m = 1.5
strength = 5.0
start_s = 0.0
end_s = 0.08
# The jet through the doorway, toward the camera.
[[forces]]
kind = "push"
shape = "box"
position_m = [0, 1.1, 0.8]
size_m = [1.0, 1.2, 0.8]
direction = [0, 0, 1]
strength = [[0.0, 60.0], [0.2, 0.0]]
max_speed_mps = 12
start_s = 0.0
end_s = 0.2
[solver]
air_limit = 0.8
burn_rate = 14
cooling = 2.5
buoyancy = 0.7
smoke_fade = 1.3
drag = 0.6
swirl = 0.7
turbulence = 0.5
turbulence_size_m = 0.5
turbulence_where = "moving"
[look]
exposure = 1.8
smoke_colour = [0.05, 0.05, 0.05]
dust_colour = [0.2, 0.18, 0.15]
[[views]]
name = "front"
[[views]]
name = "corner"
pitch_deg = 30
yaw_deg = 35
[export]
pacing = "front"
Incendiary strike line
A fast moving source that lays an unbroken wall of fire along a road, which burns off into a low line of smoke. One-shot, 18 x 10 m, 5 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# An incendiary run along a road: a source racing across the box leaves an unbroken wall of fire,
# which burns off into a low line of dirty smoke drifting with a light crosswind. One-shot.
# The emitter moves 15 m in 0.8 s; the gas it leaves behind is the trail.
[meta]
name = "incendiary_strike_line"
notes = "Fast moving source leaving a line of fire that burns off into smoke"
[domain]
size_m = [18, 10, 10]
voxel_m = 0.08
duration_s = 5.0
# The strike: a fast moving source that leaves its gas behind as a trail.
[[emitters]]
shape = "sphere"
position_m = [[0.0, -7.5, 0.5, 0], [0.8, 7.5, 0.5, 0]]
size_m = 0.5
start_s = 0.0
end_s = 0.8
fuel = 8
temperature_k = 1700
smoke = 0.5
velocity_mps = 2
direction = "up"
spread_deg = 60
inherit_velocity = 0.15
lumpiness = 0.7
# Smoke from what is left burning along the line.
[[emitters]]
shape = "box"
position_m = [0, 0.2, 0]
size_m = [7.5, 0.12, 0.4]
start_s = 0.9
end_s = 3.0
fuel = 0
temperature_k = 650
smoke = [[0.9, 2], [3, 0]]
velocity_mps = 0.6
direction = "up"
spread_deg = 30
[solver]
air_limit = 0.85
burn_rate = 9
cooling = 1.6
soot = 0.8
smoke_fade = 1.0
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.6
wind_mps = [0, 0, 0.8]
[look]
exposure = 1.6
[[views]]
name = "side"
[[views]]
name = "strategy"
pitch_deg = 55
[export]
pacing = "front"
Rising cap burst
A very large burst that rises as a cap on a stem of gathered dust, with a ground ring. One-shot, 16 x 24 m, 7 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A very large burst that rises as a cap on a stem of dust: the fireball lifts hard, a pull at its
# foot draws the ground dust in and up behind it, and a dust ring races out along the ground. One-shot.
[meta]
name = "rising_cap_burst"
notes = "Large burst rising as a cap on a dust stem, with a ground ring"
[domain]
size_m = [16, 24, 16]
voxel_m = 0.11
duration_s = 7.0
substeps = 3
[[emitters]]
shape = "sphere"
position_m = [0, 1.4, 0]
size_m = 1.6
start_s = 0.0
end_s = 0.3
fuel = 6
temperature_k = 2000
smoke = 2.0
velocity_mps = 7
lumpiness = 0.6
# Dust thrown up by the blast, which the pull at the foot gathers into a stem.
[[emitters]]
shape = "disc"
position_m = [0, 0.2, 0]
size_m = 2.5
thickness_m = 0.12
start_s = 0.05
end_s = 1.2
fuel = 0
temperature_k = 293
dust = 4
velocity_mps = 2
direction = "up"
spread_deg = 30
# The ground ring.
[[emitters]]
shape = "ring"
position_m = [0, 0.3, 0]
size_m = 2.0
thickness_m = 0.25
start_s = 0.0
end_s = 0.15
fuel = 0
temperature_k = 293
dust = 12
velocity_mps = 15
direction = "radial"
jitter = 0.6
# Air and dust drawn in under the rising ball.
[[forces]]
kind = "point"
position_m = [0, 2.0, 0]
size_m = 3.5
strength = [[0.6, 0], [1.5, -6], [5, 0]]
acts_on = "gas"
start_s = 0.6
end_s = 5.0
[solver]
air_limit = 0.88
burn_rate = 9
# The ball lifts harder once it has swollen.
buoyancy = [[0, 1], [1, 1.8], [3, 1.2]]
expansion = 1.3
cooling = 0.9
smoke_fade = 0.7
swirl = 0.9
turbulence = 0.5
turbulence_size_m = 1.2
[look]
exposure = 1.2
smoke_colour = [0.05, 0.045, 0.04]
dust_colour = [0.16, 0.12, 0.08]
[[views]]
name = "side"
[[views]]
name = "strategy"
pitch_deg = 55
[export]
pacing = "front"
channels = ["six_way", "emissive", "motion", "depth", "temperature"]
Wreck fire with hull
Deck flames and a fuel pool burning around a wrecked hull, leaning with a light wind. The hull and turret are obstacles. Loop, 8 x 10 m, 2 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A burning wreck: flames on the deck and a fuel pool burning beside the hull, leaning with a light
# wind. The hull and turret are obstacles, so the fire wraps around them and leaves a clean hole in
# the sheet for the game's own model. Loops.
[meta]
name = "wreck_fire_hull"
notes = "Deck fire and fuel pool fire around a wrecked hull, leaning with wind, looping"
[domain]
size_m = [8, 10, 8]
voxel_m = 0.06
duration_s = 2.0
[[obstacles]]
shape = "box"
position_m = [0, 0.75, 0]
size_m = [1.8, 0.55, 0.9]
rotation_deg = [0, 20, 0]
[[obstacles]]
shape = "cylinder"
position_m = [0.8, 1.5, 0]
size_m = 0.5
height_m = 0.4
# Flames on the rear deck, clear of the turret.
[[emitters]]
shape = "disc"
position_m = [-0.4, 1.45, 0]
size_m = 0.6
thickness_m = 0.06
start_s = 0.0
end_s = 1000
fuel = 6
temperature_k = 1500
smoke = 0.4
velocity_mps = 1.2
direction = "up"
spread_deg = 25
jitter = 0.6
# Fuel pooled on the ground in front of the hull.
[[emitters]]
shape = "disc"
position_m = [0, 0.12, 1.8]
size_m = 0.5
thickness_m = 0.05
start_s = 0.0
end_s = 1000
fuel = 5
temperature_k = 1450
smoke = 0.3
velocity_mps = 1.0
direction = "up"
spread_deg = 25
jitter = 0.6
[solver]
air_limit = 0.88
burn_rate = 12
cooling = 2.5
soot = 0.5
smoke_fade = 3.5
drag = 1.5
swirl = 0.8
turbulence = 0.7
turbulence_size_m = 0.5
wind_mps = [0.8, 0, 0]
[look]
exposure = 2.4
smoke_density = 0.7
[export]
loop = true
loop_blend_frames = 12
warmup_s = 3.0
Spreading ground fire
A fire front running 12 m along the ground, with a smoldering strip that grows behind it. A second view looks down from above. One-shot, 16 x 8 m, 8 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A grass fire running along the ground: the fire front moves 12 m in 5 s and the burnt strip behind
# it keeps smoldering, a smoke box that grows to follow the front. One-shot.
# The strategy view shows the burnt strip best.
[meta]
name = "spreading_ground_fire"
notes = "A moving fire front with a smoldering strip that grows behind it"
[domain]
size_m = [16, 8, 8]
voxel_m = 0.07
duration_s = 8.0
# The fire front.
[[emitters]]
shape = "disc"
position_m = [[0.0, -6, 0.15, 0], [5.0, 6, 0.15, 0]]
size_m = 0.6
thickness_m = 0.05
start_s = 0.0
end_s = 5.0
fuel = 6
temperature_k = 1500
smoke = 0.4
velocity_mps = 1.2
direction = "up"
spread_deg = 25
jitter = 0.6
# The strip behind the front, smoldering: its centre and its half-length grow as the front moves.
[[emitters]]
shape = "box"
position_m = [[0.0, -6, 0.1, 0], [5.0, 0, 0.1, 0]]
size_m = [[0.0, 0.05, 0.05, 0.5], [5.0, 6, 0.05, 0.5]]
start_s = 0.3
end_s = 7.0
fuel = 0
temperature_k = 650
smoke = [[0.3, 1.5], [5, 1.5], [7, 0]]
velocity_mps = 0.4
direction = "up"
spread_deg = 40
[solver]
air_limit = 0.88
burn_rate = 12
cooling = 2.5
soot = 0.4
smoke_fade = 1.4
drag = 1.0
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.5
wind_mps = [0.6, 0, 0]
[look]
exposure = 2.4
smoke_colour = [0.07, 0.065, 0.06]
[[views]]
name = "side"
[[views]]
name = "strategy"
pitch_deg = 55
Gas flare stack
A flare at the top of a tall stack, bent by the wind and torn by gusts. The stack is a carved cylinder. Loop, 8 x 14 m, 2 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A gas flare burning at the top of a tall stack, torn by gusts and bent by the wind. The stack is a
# cylinder with its bore carved out, so the gas could also be fed up the inside. Loops.
[meta]
name = "gas_flare_stack"
notes = "Flare on a tall stack, bent by wind and gusts, looping"
[domain]
size_m = [8, 14, 8]
voxel_m = 0.07
duration_s = 2.0
substeps = 3
[[obstacles]]
shape = "cylinder"
position_m = [-1.5, 4, 0]
size_m = 0.35
height_m = 8
# The bore.
[[obstacles]]
shape = "cylinder"
carve = true
position_m = [-1.5, 4.1, 0]
size_m = 0.22
height_m = 8.2
# The flare, just above the lip of the stack.
[[emitters]]
shape = "disc"
position_m = [-1.5, 8.25, 0]
size_m = 0.3
thickness_m = 0.06
start_s = 0.0
end_s = 1000
fuel = 10
temperature_k = 1600
smoke = 0.15
velocity_mps = 4
direction = "up"
spread_deg = 10
jitter = 0.5
# Gusts around the flame.
[[forces]]
kind = "turbulence"
position_m = [-0.5, 9.5, 0]
size_m = 2.0
strength = 8
noise_size_m = 0.6
acts_on = "gas"
[solver]
air_limit = 0.8
burn_rate = 10
cooling = 2.2
soot = 0.2
smoke_fade = 4.0
drag = 0.8
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.5
wind_mps = [2.2, 0, 0]
[look]
exposure = 2.0
[[views]]
name = "side"
[[views]]
name = "strategy"
pitch_deg = 55
[export]
loop = true
loop_blend_frames = 12
warmup_s = 3.0
Campfire on logs
A campfire on three crossed logs, with small tongues licking along each one. Loop, 3 x 4.5 m, 2 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A campfire on three crossed logs: a central flame and small tongues licking along each log. The logs
# are capsules laid flat and turned 60 degrees apart, so the flame flows around them. Loops.
# A small element: the sheet uses 192 px tiles and three times supersampling.
[meta]
name = "campfire_logs"
notes = "Campfire on three crossed logs, looping"
[domain]
size_m = [3, 4.5, 3]
voxel_m = 0.025
duration_s = 2.0
# Three logs, tipped onto their side (90 about X) and turned 0, 60 and 120 degrees about Y.
[[obstacles]]
shape = "capsule"
position_m = [0, 0.1, 0]
size_m = 0.08
height_m = 0.9
rotation_deg = [90, 0, 0]
[[obstacles]]
shape = "capsule"
position_m = [0, 0.1, 0]
size_m = 0.08
height_m = 0.9
rotation_deg = [90, 60, 0]
[[obstacles]]
shape = "capsule"
position_m = [0, 0.1, 0]
size_m = 0.08
height_m = 0.9
rotation_deg = [90, 120, 0]
# The main flame, above the crossing.
[[emitters]]
shape = "disc"
position_m = [0, 0.32, 0]
size_m = 0.22
thickness_m = 0.04
start_s = 0.0
end_s = 1000
fuel = 6
temperature_k = 1400
smoke = 0.15
velocity_mps = 0.8
direction = "up"
spread_deg = 25
jitter = 0.6
# Tongues along the logs: one small sphere just above each log, either side of the centre.
[[emitters]]
shape = "points"
position_m = [0, 0.24, 0]
size_m = 0.05
points_m = [[0, 0, 0.3], [0, 0, -0.3], [0.26, 0, 0.15], [-0.26, 0, -0.15], [0.26, 0, -0.15], [-0.26, 0, 0.15]]
start_s = 0.0
end_s = 1000
fuel = 4
temperature_k = 1300
velocity_mps = 0.5
direction = "up"
spread_deg = 30
jitter = 0.6
[solver]
air_limit = 0.85
burn_rate = 14
cooling = 3.0
soot = 0.3
smoke_fade = 5.0
drag = 1.5
swirl = 0.8
turbulence = 0.7
turbulence_size_m = 0.2
[look]
exposure = 2.4
smoke_density = 0.6
glow = 0.8
[export]
loop = true
loop_blend_frames = 12
warmup_s = 2.0
tile_px = 192
supersample = 3
House fire, two windows
A ground floor room fire rolling out of two windows and up the front, past a dark upper window. Loop, 6 x 9 m, 2 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A house fire on the ground floor: flame rolls out of two windows and smoke climbs the front past a
# dark upper window. The building is a block with two rooms and three windows carved out of it, so
# only what vents through the windows shows. Loops.
[meta]
name = "two_window_house_fire"
notes = "Ground floor room fire venting from two windows, looping; six obstacles"
[domain]
size_m = [6, 9, 6]
voxel_m = 0.05
duration_s = 2.0
# The building: front face at Z = -0.4, leaving open air in front for the flame.
[[obstacles]]
shape = "box"
position_m = [0, 3.0, -1.6]
size_m = [2.8, 3.0, 1.2]
# The ground floor room.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 1.4, -1.6]
size_m = [2.4, 1.2, 0.9]
# The upper room, with no fire in it.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 4.2, -1.6]
size_m = [2.4, 1.1, 0.9]
# Two ground floor windows.
[[obstacles]]
shape = "box"
carve = true
position_m = [-1.1, 1.6, -0.5]
size_m = [0.5, 0.6, 0.3]
[[obstacles]]
shape = "box"
carve = true
position_m = [1.1, 1.6, -0.5]
size_m = [0.5, 0.6, 0.3]
# One upper window.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 4.3, -0.5]
size_m = [0.6, 0.6, 0.3]
# Two fires on the floor of the ground floor room, clear of its walls.
[[emitters]]
shape = "disc"
position_m = [-0.9, 0.5, -1.6]
size_m = 0.45
start_s = 0.0
end_s = 1000
fuel = 8
temperature_k = 1500
smoke = 0.3
velocity_mps = 1.0
direction = "up"
spread_deg = 30
jitter = 0.6
[[emitters]]
shape = "disc"
position_m = [0.9, 0.5, -1.5]
size_m = 0.45
start_s = 0.0
end_s = 1000
fuel = 8
temperature_k = 1500
smoke = 0.3
velocity_mps = 1.0
direction = "up"
spread_deg = 30
jitter = 0.6
[solver]
air_limit = 0.6
burn_rate = 12
expansion = 0.8
cooling = 1.5
soot = 0.6
smoke_fade = 3.0
drag = 1.5
swirl = 0.8
turbulence = 0.7
turbulence_size_m = 0.5
[look]
exposure = 2.0
smoke_density = 0.8
[[views]]
name = "front"
[[views]]
name = "corner"
pitch_deg = 15
yaw_deg = 35
[export]
loop = true
loop_blend_frames = 12
warmup_s = 4.0
Jet fire leak
Burning gas jetting sideways from a broken pipe, flapping as it slows. Loop, 10 x 7 m, 2 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A jet fire from a broken pipe: burning gas shoots sideways, flaps in the turbulence along its length
# and curls upward as it slows. The pipe is a cylinder laid along X with its bore carved out. Loops.
# The colour sheet carries temperature in its alpha, for a reader that drives heat haze from it.
[meta]
name = "jet_fire_leak"
notes = "Horizontal jet fire from a broken pipe, looping"
[domain]
size_m = [10, 7, 6]
voxel_m = 0.05
duration_s = 2.0
substeps = 4
[[obstacles]]
shape = "cylinder"
position_m = [-3, 1.0, 0]
size_m = 0.2
height_m = 4
rotation_deg = [0, 0, 90]
[[obstacles]]
shape = "cylinder"
carve = true
position_m = [-3, 1.0, 0]
size_m = 0.12
height_m = 4.2
rotation_deg = [0, 0, 90]
# The leak, just past the broken end of the pipe.
[[emitters]]
shape = "sphere"
position_m = [-0.7, 1.0, 0]
size_m = 0.15
start_s = 0.0
end_s = 1000
fuel = 10
temperature_k = 900
smoke = 0.2
velocity_mps = 14
direction = [1, 0.05, 0]
spread_deg = 8
jitter = 0.4
lumpiness = 0.3
# The jet flaps along its length.
[[forces]]
kind = "turbulence"
shape = "box"
position_m = [1.5, 1.2, 0]
size_m = [3, 0.8, 0.8]
strength = 8
noise_size_m = 0.5
acts_on = "gas"
[solver]
air_limit = 0.85
burn_rate = 14
cooling = 2.5
soot = 0.3
smoke_fade = 4.0
drag = 0.8
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.4
turbulence_where = "moving"
[look]
exposure = 1.8
[export]
loop = true
loop_blend_frames = 12
warmup_s = 2.0
channels = ["six_way", "emissive", "motion", "depth", "temperature"]
format = "png16"
[export.pack]
colour = ["flame_r", "flame_g", "flame_b", "temperature"]
Chimney in shifting wind
Chimney smoke while the wind picks up, swings round and drops, so the plume leans one way and then another. A second view looks down from above. One-shot, 14 x 16 m, 9 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# Smoke from a chimney while the wind picks up, swings round and drops again. The wind is keyed, so
# the plume leans one way, then another. The strategy view shows the swing best. One-shot.
[meta]
name = "chimney_shifting_wind"
notes = "Chimney smoke under keyed, shifting wind"
[domain]
size_m = [14, 16, 14]
voxel_m = 0.1
duration_s = 9.0
# The chimney, with its flue carved out.
[[obstacles]]
shape = "box"
position_m = [-3, 3, 0]
size_m = [0.5, 3, 0.5]
[[obstacles]]
shape = "box"
carve = true
position_m = [-3, 3.2, 0]
size_m = [0.3, 3.1, 0.3]
# Smoke leaving the top of the flue.
[[emitters]]
shape = "disc"
position_m = [-3, 6.25, 0]
size_m = 0.35
thickness_m = 0.06
start_s = 0.0
end_s = 6.0
fuel = 0
temperature_k = 550
smoke = 5
velocity_mps = 1.5
direction = "up"
spread_deg = 25
jitter = 0.5
[solver]
cooling = 0.3
smoke_fade = 0.6
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 1.0
turbulence_where = "moving"
drag = 0.3
# Light, then a gust that swings toward the camera, then back the other way.
wind_mps = [[0, 0.5, 0, 0], [3, 2, 0, 0.6], [5.5, 1, 0, -1.2], [9, 0.5, 0, -0.5]]
[[views]]
name = "side"
[[views]]
name = "strategy"
pitch_deg = 55
[export]
channels = ["six_way", "motion", "depth"]
Smoke through a pipe
Smoke pushed along a pipe bore by a fan and out of the open end, where it rises. The emitter sits inside the carved bore. Loop, 10 x 8 m, 3 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# Smoke blown out of a horizontal pipe: a fan inside the bore pushes it along, it leaves the open end
# as a jet and then rises. The emitter sits inside the bore, which is carved open, and the pipe hides
# the smoke inside it. Loops.
[meta]
name = "pipe_vent_smoke"
notes = "Smoke pushed through a pipe bore and out of its open end, looping"
[domain]
size_m = [10, 8, 6]
voxel_m = 0.06
duration_s = 3.0
[[obstacles]]
shape = "cylinder"
position_m = [-2.5, 1.2, 0]
size_m = 0.35
height_m = 4
rotation_deg = [0, 0, 90]
# The bore, open at both ends.
[[obstacles]]
shape = "cylinder"
carve = true
position_m = [-2.5, 1.2, 0]
size_m = 0.25
height_m = 4.4
rotation_deg = [0, 0, 90]
# Inside the bore, near its far end. The fan pulls air in behind it.
[[emitters]]
shape = "sphere"
position_m = [-3.8, 1.2, 0]
size_m = 0.15
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 450
smoke = 6
velocity_mps = 0
lumpiness = 0.2
# The fan in the bore.
[[forces]]
kind = "push"
shape = "box"
position_m = [-2.5, 1.2, 0]
size_m = [2, 0.25, 0.25]
direction = [1, 0, 0]
strength = 30
max_speed_mps = 3.5
falloff = 0.2
[solver]
cooling = 0.4
smoke_fade = 0.9
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 0.6
turbulence_where = "moving"
drag = 0.4
[look]
smoke_colour = [0.1, 0.095, 0.09]
[export]
loop = true
loop_blend_frames = 12
warmup_s = 4.0
channels = ["six_way", "motion", "depth"]
Smoke under a sliding slab
A low smoke pool pushed and dragged by a solid sliding over it, as under a hover vehicle or a closing blast door. One-shot, 12 x 6 m, 5 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A low pool of smoke disturbed by a solid sliding over it, as under a hovering vehicle or a closing
# blast door. The slab is a moving obstacle: it pushes the smoke ahead of it and drags it along
# underneath, and the pool spills out behind. One-shot.
[meta]
name = "smoke_under_sliding_slab"
notes = "Ground smoke pushed and dragged by a moving slab"
[domain]
size_m = [12, 6, 8]
voxel_m = 0.06
duration_s = 5.0
# The slab waits, then slides 8 m along X a metre above the floor.
[[obstacles]]
shape = "box"
position_m = [[0, -5, 1, 0], [1.2, -5, 1, 0], [3.2, 3, 1, 0]]
size_m = [1.6, 0.1, 1.6]
# The smoke pool: cool, slow, low.
[[emitters]]
shape = "box"
position_m = [-2, 0.25, 0]
size_m = [1.5, 0.2, 1.2]
start_s = 0.0
end_s = 1.0
fuel = 0
temperature_k = 330
smoke = 6
velocity_mps = 0
lumpiness = 0.6
[solver]
buoyancy = 0.5
cooling = 0.5
smoke_fade = 0.4
swirl = 0.9
turbulence = 0.3
turbulence_size_m = 0.5
turbulence_where = "moving"
drag = 0.3
[[views]]
name = "side"
[[views]]
name = "strategy"
pitch_deg = 55
[export]
channels = ["six_way", "motion", "depth"]
Signal smoke puffs
Red signal smoke from a canister in four puffs, switched on and off with step keys and carried off by a light wind. One-shot, 8 x 12 m, 8 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# Red signal smoke from a canister on the ground, coming in four puffs. The smoke rate is keyed with
# step easing, so it switches on and off instead of fading. A light wind carries the puffs off. One-shot.
[meta]
name = "signal_smoke_puffs"
notes = "Red signal smoke in four puffs from a canister"
[domain]
size_m = [8, 12, 8]
voxel_m = 0.07
duration_s = 8.0
# The canister.
[[obstacles]]
shape = "cylinder"
position_m = [-1.5, 0.125, 0]
size_m = 0.08
height_m = 0.25
[[emitters]]
shape = "disc"
position_m = [-1.5, 0.32, 0]
size_m = 0.12
thickness_m = 0.03
start_s = 0.0
end_s = 4.0
fuel = 0
temperature_k = 500
smoke = [[0, 8], [0.399, 8], [0.4, 0], [1.199, 0], [1.2, 8], [1.599, 8], [1.6, 0], [2.399, 0], [2.4, 8], [2.799, 8], [2.8, 0], [3.599, 0], [3.6, 8], [3.999, 8], [4, 0]]
velocity_mps = 3
direction = "up"
spread_deg = 20
jitter = 0.5
[solver]
cooling = 0.5
smoke_fade = 0.7
swirl = 0.9
turbulence = 0.4
turbulence_size_m = 0.5
turbulence_where = "moving"
drag = 0.4
wind_mps = [1.0, 0, 0]
[look]
# Linear light: this reads as a strong signal red, not pink.
smoke_colour = [0.35, 0.05, 0.03]
smoke_density = 1.4
[export]
channels = ["six_way", "motion", "depth"]
Sheared blast column
The smoke column after a blast, bent off at its head by wind that picks up aloft after a second and a half. One-shot, 16 x 18 m, 7 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# The smoke column left by a blast, sheared by wind that picks up aloft. A push across the top of the
# box ramps up after a second and a half, so the head of the column bends off while the foot stays,
# and gusts tear at the bend. One-shot.
[meta]
name = "sheared_blast_column"
notes = "Post-blast smoke column sheared by a keyed push aloft"
[domain]
size_m = [16, 18, 12]
voxel_m = 0.1
duration_s = 7.0
[[emitters]]
shape = "sphere"
position_m = [-4, 0.8, 0]
size_m = 1.0
start_s = 0.0
end_s = 0.8
fuel = 0
temperature_k = 700
smoke = 6
velocity_mps = 3
direction = "up"
spread_deg = 50
jitter = 0.5
# Wind aloft that starts after the column has risen.
[[forces]]
kind = "push"
shape = "box"
position_m = [0, 13, 0]
size_m = [8, 5, 6]
direction = [1, 0, 0]
strength = [[0, 0], [1.5, 0], [3.5, 3]]
max_speed_mps = 3.5
falloff = 0.6
# Gusts where the column bends.
[[forces]]
kind = "turbulence"
position_m = [-1, 10, 0]
size_m = 3.5
strength = 4
noise_size_m = 1.2
acts_on = "gas"
start_s = 1.5
[solver]
cooling = 0.3
smoke_fade = 0.6
swirl = 0.7
turbulence = 0.5
turbulence_size_m = 1.2
turbulence_where = "moving"
wind_mps = [0.3, 0, 0]
[export]
pacing = "front"
channels = ["six_way", "motion", "depth"]
Vortex smoke loft
Smoke and dust drawn off a burnt field into a slow spinning column by a vortex and a pull at its foot. Loop, 8 x 14 m, 3 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# Smoke and dust drawn off a burnt field into a slow spinning column, the way a strong thermal over a
# fire lofts it. A vortex up the column spins it and a pull at the foot keeps it narrow. Loops.
[meta]
name = "vortex_smoke_loft"
notes = "Smoke and dust spun into a rising column by a vortex, looping"
[domain]
size_m = [8, 14, 8]
voxel_m = 0.07
duration_s = 3.0
[[emitters]]
shape = "ring"
position_m = [0, 0.2, 0]
size_m = 1.2
thickness_m = 0.12
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 420
smoke = 3
dust = 1.5
velocity_mps = 0.6
direction = "up"
spread_deg = 30
[[forces]]
kind = "vortex"
shape = "box"
position_m = [0, 6, 0]
size_m = [1.6, 6, 1.6]
direction = [0, 1, 0]
strength = 12
max_speed_mps = 4
falloff = 0.4
[[forces]]
kind = "point"
position_m = [0, 1.0, 0]
size_m = 2.2
strength = -5
falloff = 0.6
[solver]
cooling = 0.3
smoke_fade = 0.8
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 0.8
turbulence_where = "moving"
drag = 0.5
[look]
smoke_colour = [0.07, 0.065, 0.06]
dust_colour = [0.22, 0.17, 0.11]
[export]
loop = true
loop_blend_frames = 12
warmup_s = 5.0
channels = ["six_way", "motion", "depth"]
Mortar crater
A heavy mortar round on dirt: flash, earth cone, fast skirt, slower rolling rim and a short shock. One-shot, 10 x 8 m, 3.5 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A heavy mortar round on dirt, larger than the official impact: a flash, earth thrown up in a cone,
# a fast skirt and a slower rolling rim, all pushed by a short shock. Pressure is solved in 32 bit
# numbers and to a tighter accuracy, which keeps the falling dust from drifting. One-shot.
[meta]
name = "mortar_crater"
notes = "Heavy mortar impact on dirt: flash, earth cone, skirt, rolling rim, shock"
[domain]
size_m = [10, 8, 10]
voxel_m = 0.055
duration_s = 3.5
substeps = 3
# The flash. Little fuel and short, so it does not carry the dust up as a column.
[[emitters]]
shape = "sphere"
position_m = [0, 0.3, 0]
size_m = 0.45
start_s = 0.0
end_s = 0.06
fuel = 3
temperature_k = 2000
smoke = 2.0
velocity_mps = 7
direction = "radial"
# Earth thrown up and outward.
[[emitters]]
shape = "sphere"
position_m = [0, 0.25, 0]
size_m = 0.45
start_s = 0.0
end_s = 0.15
fuel = 0
temperature_k = 293
dust = 14
velocity_mps = 12
direction = "up"
spread_deg = 110
jitter = 0.6
# The fast skirt along the ground.
[[emitters]]
shape = "ring"
position_m = [0, 0.2, 0]
size_m = 0.6
thickness_m = 0.12
start_s = 0.0
end_s = 0.12
fuel = 0
temperature_k = 293
dust = 10
velocity_mps = 9
direction = "radial"
jitter = 0.6
# The slower rim that rolls out after it.
[[emitters]]
shape = "disc"
position_m = [0, 0.15, 0]
size_m = 0.8
thickness_m = 0.08
start_s = 0.08
end_s = 0.4
fuel = 0
temperature_k = 293
dust = 6
velocity_mps = 3
direction = "radial"
spread_deg = 70
jitter = 0.6
[[forces]]
kind = "expand"
position_m = [0, 0.3, 0]
size_m = 1.2
strength = 4.0
start_s = 0.0
end_s = 0.06
[solver]
burn_rate = 30
cooling = 8
air_limit = 0.5
buoyancy = 0.3
smoke_fade = 1.3
swirl = 0.6
turbulence = 0.5
turbulence_size_m = 0.4
turbulence_where = "moving"
drag = 0.9
precision = "full"
pressure_accuracy = 0.005
[look]
exposure = 2.5
smoke_colour = [0.05, 0.05, 0.05]
dust_colour = [0.12, 0.085, 0.05]
[[views]]
name = "side"
[[views]]
name = "strategy"
pitch_deg = 55
[export]
pacing = "front"
Dropship landing
A hull settling to the ground while its downwash blasts a ring of dust outward. The hull is a moving obstacle. One-shot, 16 x 8 m, 6 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A dropship settling onto dry ground: its downwash ramps up as it descends and blasts a ring of dust
# outward along the ground. The hull is a capsule that moves down, so it also shoves the air under
# it, and it hides the dust behind it in the sheet. One-shot.
[meta]
name = "dropship_landing"
notes = "Descending hull with keyed downwash kicking up a dust ring"
[domain]
size_m = [16, 8, 16]
voxel_m = 0.08
duration_s = 6.0
# The hull, lying along X, coming down from 6 m to 2 m.
[[obstacles]]
shape = "capsule"
position_m = [[0, 0, 6, 0], [2, 0, 2.2, 0], [2.6, 0, 2, 0]]
size_m = 1.0
height_m = 3
rotation_deg = [0, 0, 90]
# The downwash under the hull. It follows the hull down and grows stronger near the ground.
[[forces]]
kind = "push"
shape = "box"
position_m = [[0, 0, 3.8, 0], [2, 0, 1, 0], [2.6, 0, 0.8, 0]]
size_m = [2, 0.6, 2]
direction = [0, -1, 0]
strength = [[0, 4], [2, 20], [6, 20]]
max_speed_mps = 9
falloff = 0.4
# Loose dust on the ground, lifted only by the moving air.
[[emitters]]
shape = "disc"
position_m = [0, 0.1, 0]
size_m = 2.5
thickness_m = 0.08
start_s = 1.0
end_s = 5.0
fuel = 0
temperature_k = 293
dust = [[1, 0], [1.8, 6], [3.5, 3], [5, 0]]
velocity_mps = 0
# The ring blown outward once the wash reaches the ground.
[[emitters]]
shape = "ring"
position_m = [0, 0.2, 0]
size_m = 2.2
thickness_m = 0.15
start_s = 1.6
end_s = 4.0
fuel = 0
temperature_k = 293
dust = 5
velocity_mps = 6
direction = "radial"
jitter = 0.6
[solver]
buoyancy = 0.3
cooling = 2.0
smoke_fade = 0.9
swirl = 0.7
turbulence = 0.6
turbulence_size_m = 0.6
turbulence_where = "moving"
drag = 0.6
[look]
dust_colour = [0.3, 0.24, 0.16]
[[views]]
name = "side"
[[views]]
name = "strategy"
pitch_deg = 55
[export]
channels = ["six_way", "motion", "depth"]
Collapse dust surge
A building sinking into the ground in a surge of dust from its foot and its roof. The block is a moving obstacle. One-shot, 14 x 9 m, 6 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A building coming down in a surge of dust: the block sinks into the ground, a ring of dust rolls
# out from its foot and a cloud spills off its roof as it drops. The block is a moving obstacle and is
# gone once it is below the floor. One-shot.
[meta]
name = "collapse_dust_surge"
notes = "Sinking block with a dust surge from its foot and its roof"
[domain]
size_m = [14, 9, 14]
voxel_m = 0.08
duration_s = 6.0
# The building: stands for 0.4 s, then sinks 5 m in 2 s.
[[obstacles]]
shape = "box"
position_m = [[0, 0, 2.5, 0], [0.4, 0, 2.5, 0], [2.4, 0, -2.6, 0]]
size_m = [1.5, 2.5, 1.5]
end_s = 2.6
# The surge from the foot, clear of the corners of the block.
[[emitters]]
shape = "ring"
position_m = [0, 0.3, 0]
size_m = 2.3
thickness_m = 0.2
start_s = 0.5
end_s = 2.6
fuel = 0
temperature_k = 293
dust = [[0.5, 4], [1.4, 10], [2.6, 2]]
velocity_mps = [[0.5, 2], [1.2, 8], [2.6, 3]]
direction = "radial"
jitter = 0.6
# Dust off the roof. It rides 0.2 m above the roof all the way down.
[[emitters]]
shape = "disc"
position_m = [[0, 0, 5.2, 0], [0.4, 0, 5.2, 0], [2.4, 0, 0.1, 0]]
size_m = 1.4
thickness_m = 0.05
start_s = 0.4
end_s = 2.4
fuel = 0
temperature_k = 293
dust = 5
velocity_mps = 1.0
direction = "up"
spread_deg = 60
[solver]
buoyancy = 0.3
cooling = 2.0
smoke_fade = 0.7
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.7
turbulence_where = "moving"
drag = 0.6
[look]
dust_colour = [0.26, 0.24, 0.21]
[[views]]
name = "side"
[[views]]
name = "strategy"
pitch_deg = 55
[export]
channels = ["six_way", "motion", "depth"]
Strafing dust line
Six dust spouts walking along the ground a tenth of a second apart. One-shot, 16 x 5 m, 2.5 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# Dust spouts from a strafing run walking along the ground, one every tenth of a second. Each hit is
# its own short emitter. The view uses a fixed scale of 15 m per tile, to match other sheets drawn
# at that scale, and the sheet is 8 x 4 tiles. One-shot.
[meta]
name = "strafing_dust_line"
notes = "Six dust spouts walking along a line, fixed scale view"
[domain]
size_m = [16, 5, 6]
voxel_m = 0.065
duration_s = 2.5
substeps = 3
[[emitters]]
shape = "sphere"
position_m = [-6.5, 0.15, 0]
size_m = 0.15
start_s = 0.0
end_s = 0.06
fuel = 0
temperature_k = 293
dust = 14
velocity_mps = 9
direction = "up"
spread_deg = 35
jitter = 0.6
[[emitters]]
shape = "sphere"
position_m = [-4.0, 0.15, 0.3]
size_m = 0.15
start_s = 0.1
end_s = 0.16
fuel = 0
temperature_k = 293
dust = 14
velocity_mps = 9
direction = "up"
spread_deg = 35
jitter = 0.6
[[emitters]]
shape = "sphere"
position_m = [-1.5, 0.15, -0.2]
size_m = 0.15
start_s = 0.2
end_s = 0.26
fuel = 0
temperature_k = 293
dust = 14
velocity_mps = 9
direction = "up"
spread_deg = 35
jitter = 0.6
[[emitters]]
shape = "sphere"
position_m = [1.0, 0.15, 0.1]
size_m = 0.15
start_s = 0.3
end_s = 0.36
fuel = 0
temperature_k = 293
dust = 14
velocity_mps = 9
direction = "up"
spread_deg = 35
jitter = 0.6
[[emitters]]
shape = "sphere"
position_m = [3.5, 0.15, -0.3]
size_m = 0.15
start_s = 0.4
end_s = 0.46
fuel = 0
temperature_k = 293
dust = 14
velocity_mps = 9
direction = "up"
spread_deg = 35
jitter = 0.6
[[emitters]]
shape = "sphere"
position_m = [6.0, 0.15, 0]
size_m = 0.15
start_s = 0.5
end_s = 0.56
fuel = 0
temperature_k = 293
dust = 14
velocity_mps = 9
direction = "up"
spread_deg = 35
jitter = 0.6
[solver]
buoyancy = 0.3
cooling = 4.0
smoke_fade = 1.5
swirl = 0.6
turbulence = 0.5
turbulence_size_m = 0.3
turbulence_where = "moving"
drag = 1.0
[look]
dust_colour = [0.14, 0.1, 0.065]
[[views]]
name = "side"
fit = "fixed"
metres_per_tile = 15
margin = 0.02
[export]
grid = [8, 4]
pacing = "front"
channels = ["six_way", "motion", "depth"]
Meteor strike
A burning body streaking down at a steep angle and striking the ground: trail, flash, thrown earth, dust ring and shock. One-shot, 14 x 12 m, 4.5 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A burning object streaking down at a steep angle and striking the ground: a hot trail behind it,
# then a flash, a cone of thrown earth, a dust ring and a short shock at the moment of impact,
# half a second in. One-shot.
[meta]
name = "meteor_strike"
notes = "Moving hot source with a trail, then a multi-stage ground impact at 0.5 s"
[domain]
size_m = [14, 12, 14]
voxel_m = 0.08
duration_s = 4.5
substeps = 3
# The incoming body: 12 m of travel in half a second, leaving its gas behind as a trail.
[[emitters]]
shape = "sphere"
position_m = [[0.0, -6, 11, -2], [0.5, 0, 0.7, 0]]
size_m = 0.35
start_s = 0.0
end_s = 0.5
fuel = 4
temperature_k = 2200
smoke = 1.0
velocity_mps = 0.5
inherit_velocity = 0.1
lumpiness = 0.3
# The flash at impact.
[[emitters]]
shape = "sphere"
position_m = [0, 0.5, 0]
size_m = 0.7
start_s = 0.5
end_s = 0.58
fuel = 5
temperature_k = 2400
smoke = 2.0
velocity_mps = 8
# Earth thrown up.
[[emitters]]
shape = "sphere"
position_m = [0, 0.3, 0]
size_m = 0.6
start_s = 0.5
end_s = 0.65
fuel = 0
temperature_k = 293
dust = 12
velocity_mps = 12
direction = "up"
spread_deg = 110
jitter = 0.6
# The ring along the ground.
[[emitters]]
shape = "ring"
position_m = [0, 0.25, 0]
size_m = 0.9
thickness_m = 0.15
start_s = 0.5
end_s = 0.62
fuel = 0
temperature_k = 293
dust = 10
velocity_mps = 12
direction = "radial"
jitter = 0.6
[[forces]]
kind = "expand"
position_m = [0, 0.5, 0]
size_m = 2.0
strength = 5.0
start_s = 0.5
end_s = 0.6
[solver]
air_limit = 0.7
burn_rate = 20
cooling = 4.0
buoyancy = 0.5
smoke_fade = 1.1
swirl = 0.7
turbulence = 0.5
turbulence_size_m = 0.5
drag = 0.6
[look]
exposure = 2.0
smoke_colour = [0.045, 0.04, 0.04]
dust_colour = [0.13, 0.09, 0.055]
[[views]]
name = "side"
[[views]]
name = "strategy"
pitch_deg = 55
[export]
pacing = "front"
Mech footfall
A giant walker's foot coming down on dry ground and throwing a ring of dust at the moment it lands. One-shot, 10 x 6 m, 3 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A giant walker's foot coming down on dry ground: the foot drops, shoves the air out from under it,
# and a ring of dust bursts out at the moment it lands. The foot is a moving obstacle that stays
# planted. One-shot.
[meta]
name = "mech_footfall"
notes = "Falling foot obstacle with a dust ring at contact, 0.35 s"
[domain]
size_m = [10, 6, 10]
voxel_m = 0.06
duration_s = 3.0
substeps = 3
# The foot: 3 m up, planted at 0.35 s.
[[obstacles]]
shape = "box"
position_m = [[0.0, 0, 3.0, 0], [0.35, 0, 0.32, 0]]
size_m = [0.8, 0.3, 1.1]
# The ring at contact, just outside the corners of the foot.
[[emitters]]
shape = "ring"
position_m = [0, 0.2, 0]
size_m = 1.6
thickness_m = 0.12
start_s = 0.35
end_s = 0.45
fuel = 0
temperature_k = 293
dust = 12
velocity_mps = 10
direction = "radial"
jitter = 0.6
# The air squeezed out from under the foot carries the dust out further.
[[forces]]
kind = "point"
position_m = [0, 0.3, 0]
size_m = 2.5
strength = 30
acts_on = "gas"
start_s = 0.35
end_s = 0.45
[solver]
buoyancy = 0.3
cooling = 4.0
smoke_fade = 1.4
swirl = 0.6
turbulence = 0.6
turbulence_size_m = 0.4
turbulence_where = "moving"
drag = 0.8
[look]
dust_colour = [0.15, 0.11, 0.07]
[[views]]
name = "side"
[[views]]
name = "strategy"
pitch_deg = 55
[export]
pacing = "front"
channels = ["six_way", "motion", "depth"]
[export.pack]
aux = ["motion_x", "motion_y", "depth", "thickness"]
Steam under a hull
Steam from floor vents hitting the curved underside of a ship's hull, running along it and spilling past the sides. Loop, 12 x 7 m, 3 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# Steam rising from vents under a ship's hull in dry dock: it hits the curved underside, runs along it
# and spills up past the sides. The hull is a capsule laid along X; the vents are one points emitter.
# Steam is pale, so the smoke colour is the lightest in the library and fades fast. Loops.
[meta]
name = "steam_under_hull"
notes = "Steam vents under a hull, spreading along its underside, looping"
[domain]
size_m = [12, 7, 8]
voxel_m = 0.06
duration_s = 3.0
[[obstacles]]
shape = "capsule"
position_m = [0, 2.6, 0]
size_m = 1.2
height_m = 7
rotation_deg = [0, 0, 90]
# Four vents in the floor under the hull.
[[emitters]]
shape = "points"
position_m = [0, 0.3, 0]
size_m = 0.15
points_m = [[-3, 0, 0], [-1, 0, 0.3], [1, 0, -0.3], [3, 0, 0]]
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 380
smoke = 4
velocity_mps = 2
direction = "up"
spread_deg = 15
jitter = 0.5
[solver]
cooling = 0.6
smoke_fade = 1.5
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 0.5
turbulence_where = "moving"
drag = 0.4
[look]
smoke_colour = [0.3, 0.31, 0.33]
smoke_density = 0.8
shadow = 0.5
soft_light = 0.6
[export]
loop = true
loop_blend_frames = 12
warmup_s = 4.0
channels = ["six_way", "motion", "depth"]
Courtyard smoke
Smoke pooling in a walled courtyard and spilling over the downwind wall where a breeze crosses the top. Loop, 12 x 12 m, 4 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# Smoke filling a walled courtyard from a fire inside it, then spilling over the downwind wall where
# a breeze crosses the top. The walls are a block with the courtyard and a gate carved out of it. The
# strategy view is the one to use. Loops.
[meta]
name = "courtyard_smoke"
notes = "Smoke pooling in a walled courtyard and spilling over the downwind wall, looping"
[domain]
size_m = [12, 12, 12]
voxel_m = 0.08
duration_s = 4.0
# The walls: a block 8 m square and 3 m high...
[[obstacles]]
shape = "box"
position_m = [0, 1.5, 0]
size_m = [4, 1.5, 4]
# ...with the courtyard carved out of it, open to the sky, leaving a 0.1 m floor.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 1.7, 0]
size_m = [3.6, 1.6, 3.6]
# A gate in the front wall.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 0.9, 3.8]
size_m = [0.6, 0.9, 0.5]
# The fire in the courtyard: smoke only, kept clear of the walls.
[[emitters]]
shape = "disc"
position_m = [-1.5, 0.35, -1.0]
size_m = 0.6
thickness_m = 0.12
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 480
smoke = 4
velocity_mps = 1.0
direction = "up"
spread_deg = 30
jitter = 0.5
# The breeze above the wall tops.
[[forces]]
kind = "push"
shape = "box"
position_m = [0, 5, 0]
size_m = [6, 2, 6]
direction = [1, 0, 0.3]
strength = 3
max_speed_mps = 2.5
falloff = 0.5
[solver]
cooling = 0.4
smoke_fade = 0.6
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 0.8
turbulence_where = "moving"
drag = 0.4
[[views]]
name = "strategy"
pitch_deg = 55
[[views]]
name = "side"
[export]
loop = true
loop_blend_frames = 12
warmup_s = 6.0
channels = ["six_way", "motion", "depth"]
Canyon wind plume
A plume streaming along a canyon between two cliffs. The near cliff has holdout off, so the side view sees through it. Loop, 16 x 10 m, 4 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A smoke plume caught in a canyon: the wind runs along the gorge, so the plume lies over and streams
# between the cliffs instead of spreading. The near cliff has holdout off, so the side view sees the
# smoke through it as if it were glass; it still shades the smoke. Loops.
[meta]
name = "canyon_wind_plume"
notes = "Plume streaming along a canyon between two cliffs, looping"
[domain]
size_m = [16, 10, 10]
voxel_m = 0.08
duration_s = 4.0
# The far cliff.
[[obstacles]]
shape = "box"
position_m = [0, 4, -3.0]
size_m = [8, 4, 1.5]
# The near cliff, between the camera and the smoke.
[[obstacles]]
shape = "box"
position_m = [0, 3, 3.2]
size_m = [8, 3, 1.5]
holdout = false
[[emitters]]
shape = "disc"
position_m = [-5, 0.3, 0]
size_m = 0.6
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 560
smoke = 4.5
velocity_mps = 1.5
direction = "up"
spread_deg = 30
jitter = 0.5
# Gusts where the wind comes off the cliff tops.
[[forces]]
kind = "turbulence"
shape = "box"
position_m = [1, 6.5, 0]
size_m = [6, 1.2, 2]
strength = 3
noise_size_m = 1.0
acts_on = "gas"
[solver]
cooling = 0.3
smoke_fade = 0.6
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 1.0
turbulence_where = "moving"
drag = 0.3
wind_mps = [2.0, 0, 0]
[[views]]
name = "side"
[[views]]
name = "strategy"
pitch_deg = 55
[export]
loop = true
loop_blend_frames = 12
warmup_s = 5.0
channels = ["six_way", "motion", "depth"]
Doorway smoke
Smoke from a smoldering room leaking out of the top of its doorway and climbing the wall. The building holds out the room. Loop, 8 x 6 m, 3 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# Smoke from a smoldering room leaking out of the top of its doorway and climbing the front wall.
# The building holds out the gas behind it, so the room shows only through the door and the game's
# own model fills the rest. The side view shows the smoke hugging the wall. Loops.
[meta]
name = "doorway_smoke_holdout"
notes = "Smoke leaking from a doorway and up the facade, looping"
[domain]
size_m = [8, 6, 7]
voxel_m = 0.05
duration_s = 3.0
[[obstacles]]
shape = "box"
position_m = [0, 2.5, -2.0]
size_m = [3, 2.5, 1.5]
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 1.4, -2.0]
size_m = [2.7, 1.2, 1.2]
# The doorway.
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 1.2, -0.6]
size_m = [0.5, 1.0, 0.3]
# The smoldering pile in the back corner of the room.
[[emitters]]
shape = "sphere"
position_m = [-1.5, 0.8, -2.2]
size_m = 0.4
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 520
smoke = 4
velocity_mps = 0.5
lumpiness = 0.4
[solver]
cooling = 0.5
smoke_fade = 0.7
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 0.4
turbulence_where = "moving"
drag = 0.5
[look]
smoke_colour = [0.06, 0.055, 0.05]
[[views]]
name = "front"
[[views]]
name = "side"
yaw_deg = 90
[export]
loop = true
loop_blend_frames = 12
warmup_s = 6.0
channels = ["six_way", "motion", "depth"]
Fan pulling a plume
A plume drawn sideways into a big extraction fan with two spinning blades and a push through its shroud. Loop, 10 x 8 m, 3 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A plume drawn sideways into a big extraction fan. The fan is a shroud (a cylinder with its bore
# carved out) and two crossed blades that spin at one turn a second and drag the air; a push inside the
# shroud does the pulling. Loops.
[meta]
name = "fan_pulled_plume"
notes = "Smoke plume pulled into a spinning fan, looping"
[domain]
size_m = [10, 8, 8]
voxel_m = 0.06
duration_s = 3.0
# The shroud, its axis along X.
[[obstacles]]
shape = "cylinder"
position_m = [3, 2.5, 0]
size_m = 0.9
height_m = 0.4
rotation_deg = [0, 0, 90]
[[obstacles]]
shape = "cylinder"
carve = true
position_m = [3, 2.5, 0]
size_m = 0.8
height_m = 0.5
rotation_deg = [0, 0, 90]
# Two blades spinning about X at 360 degrees a second, a quarter turn apart.
[[obstacles]]
shape = "box"
position_m = [3, 2.5, 0]
size_m = [0.05, 0.75, 0.12]
rotation_deg = [[0, 0, 0, 0], [100, 36000, 0, 0]]
[[obstacles]]
shape = "box"
position_m = [3, 2.5, 0]
size_m = [0.05, 0.75, 0.12]
rotation_deg = [[0, -90, 0, 0], [100, 35910, 0, 0]]
# The pull through the shroud.
[[forces]]
kind = "push"
shape = "box"
position_m = [3, 2.5, 0]
size_m = [0.4, 0.8, 0.8]
direction = [1, 0, 0]
strength = 25
max_speed_mps = 4
falloff = 0.3
[[emitters]]
shape = "disc"
position_m = [-1.5, 0.3, 0]
size_m = 0.5
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 500
smoke = 4
velocity_mps = 1.2
direction = "up"
spread_deg = 25
jitter = 0.5
[solver]
cooling = 0.4
smoke_fade = 0.7
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 0.6
turbulence_where = "moving"
drag = 0.4
[export]
loop = true
loop_blend_frames = 12
warmup_s = 4.0
channels = ["six_way", "motion", "depth"]
Rooftop vents in wind
Exhaust from three roof vents, fed by one points emitter, streaming off in a gusty crosswind. Loop, 12 x 8 m, 3 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# Exhaust from three vents on a flat roof, streaming off in a gusty crosswind. The roof is a box that
# fills the floor of the element, the vents are cylinders on it, and one points emitter feeds all
# three vent tops. Loops.
[meta]
name = "rooftop_vents_wind"
notes = "Three roof vents streaming in a gusty crosswind, looping"
[domain]
size_m = [12, 8, 8]
voxel_m = 0.07
duration_s = 3.0
# The roof, 2 m up.
[[obstacles]]
shape = "box"
position_m = [0, 1, 0]
size_m = [6, 1, 4]
[[obstacles]]
shape = "cylinder"
position_m = [-3, 2.4, -1]
size_m = 0.2
height_m = 0.8
[[obstacles]]
shape = "cylinder"
position_m = [0, 2.4, 1]
size_m = 0.2
height_m = 0.8
[[obstacles]]
shape = "cylinder"
position_m = [2.5, 2.4, -0.5]
size_m = 0.2
height_m = 0.8
# The vent tops, at 2.95 m, just above the 2.8 m lips.
[[emitters]]
shape = "points"
position_m = [0, 2.95, 0]
size_m = 0.16
points_m = [[-3, 0, -1], [0, 0, 1], [2.5, 0, -0.5]]
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 420
smoke = 3
velocity_mps = 2
direction = "up"
spread_deg = 15
jitter = 0.5
# Gusts over the whole roof.
[[forces]]
kind = "turbulence"
shape = "everywhere"
strength = 3
noise_size_m = 1.0
acts_on = "gas"
[solver]
cooling = 0.5
smoke_fade = 1.0
swirl = 0.8
turbulence = 0.3
turbulence_size_m = 0.6
turbulence_where = "moving"
drag = 0.4
wind_mps = [1.8, 0, 0.4]
[look]
smoke_colour = [0.18, 0.18, 0.19]
[[views]]
name = "side"
[[views]]
name = "strategy"
pitch_deg = 55
[export]
loop = true
loop_blend_frames = 12
warmup_s = 5.0
channels = ["six_way", "motion", "depth"]
Cold blue fire
A blue flame ramp with a slow curl, for a frost spell or a spirit flame. The flame is ordinary burning gas with a different color ramp. Loop, 5 x 7 m, 2 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A cold blue fire for a frost spell or a spirit flame: the flame ramp runs from deep blue to white
# instead of blackbody orange, and a slow vortex gives the column a curl. Still burning gas, only
# coloured differently. Loops.
[meta]
name = "cold_blue_fire"
notes = "Blue flame ramp with a slow curl, looping"
[domain]
size_m = [5, 7, 5]
voxel_m = 0.045
duration_s = 2.0
[[emitters]]
shape = "disc"
position_m = [0, 0.15, 0]
size_m = 0.55
start_s = 0.0
end_s = 1000
fuel = 6
temperature_k = 1500
smoke = 0.1
velocity_mps = 1.5
direction = "up"
spread_deg = 25
jitter = 0.6
[[forces]]
kind = "vortex"
shape = "box"
position_m = [0, 2.5, 0]
size_m = [0.9, 2.5, 0.9]
direction = [0, 1, 0]
strength = 6
max_speed_mps = 2
falloff = 0.5
[solver]
air_limit = 0.88
burn_rate = 12
cooling = 2.5
soot = 0.15
smoke_fade = 6.0
drag = 1.5
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.4
[look]
# [kelvin, r, g, b] in linear light: deep blue at the edges, white at the hottest core.
flame_ramp = [[700, 0.0, 0.02, 0.1], [1100, 0.03, 0.18, 0.9], [1500, 0.2, 0.55, 1.0], [2000, 0.8, 0.92, 1.0]]
exposure = 2.4
smoke_colour = [0.03, 0.04, 0.06]
smoke_density = 0.5
glow = 0.8
[export]
loop = true
loop_blend_frames = 12
warmup_s = 2.5
Alchemical cauldron
Low green flames over a cauldron and a heavy green vapor, made of dust, pouring over the rim and across the floor. Loop, 5 x 6 m, 2 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A cauldron of green alchemical fire: low green flames over the brew and a heavy green vapour that
# spills over the rim and rolls across the floor. The vapour is dust with a green colour, since dust is
# the heavy, cold part of pyrofx. The cauldron is a sphere hollowed by two carves. Loops.
[meta]
name = "alchemical_cauldron"
notes = "Green flame ramp over a cauldron, heavy green vapour spilling over the rim, looping"
[domain]
size_m = [5, 6, 5]
voxel_m = 0.04
duration_s = 2.0
# The pot: a sphere, hollowed out, with its top cut off.
[[obstacles]]
shape = "sphere"
position_m = [0, 0.55, 0]
size_m = 0.6
[[obstacles]]
shape = "sphere"
carve = true
position_m = [0, 0.62, 0]
size_m = 0.52
[[obstacles]]
shape = "box"
carve = true
position_m = [0, 1.15, 0]
size_m = [0.7, 0.4, 0.7]
# The vapour, inside the pot. It is cold and heavy, so it pours over the rim.
[[emitters]]
shape = "disc"
position_m = [0, 0.75, 0]
size_m = 0.35
thickness_m = 0.05
start_s = 0.0
end_s = 1000
fuel = 0
temperature_k = 293
dust = 3
velocity_mps = 0.5
direction = "up"
spread_deg = 60
jitter = 0.6
# Low flames over the brew.
[[emitters]]
shape = "disc"
position_m = [0, 0.95, 0]
size_m = 0.3
thickness_m = 0.04
start_s = 0.0
end_s = 1000
fuel = 3
temperature_k = 1300
smoke = 0.2
velocity_mps = 0.6
direction = "up"
spread_deg = 30
jitter = 0.6
[solver]
air_limit = 0.85
burn_rate = 12
cooling = 3.0
buoyancy = 0.7
soot = 0.2
smoke_fade = 1.2
drag = 1.0
swirl = 0.8
turbulence = 0.5
turbulence_size_m = 0.3
[look]
flame_ramp = [[700, 0.0, 0.05, 0.0], [1000, 0.05, 0.4, 0.05], [1300, 0.3, 0.9, 0.2], [1800, 0.85, 1.0, 0.7]]
exposure = 2.0
smoke_colour = [0.04, 0.16, 0.06]
dust_colour = [0.06, 0.2, 0.08]
glow = 1.0
[export]
loop = true
loop_blend_frames = 12
warmup_s = 3.0
Ember brazier
Low, ember-warm fire in a brazier bowl: a deep red to amber ramp and strong glow in the smoke above it. Loop, 3 x 4.5 m, 2 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A brazier of low, ember-warm fire for a hall or a camp at night: a deep red to amber ramp, low
# exposure and strong glow, so the light sits in the smoke above the bowl. The brazier is a carved
# cylinder bowl on a thin stand. Loops.
[meta]
name = "ember_brazier"
notes = "Ember-warm ramp with strong glow over a brazier bowl, looping"
[domain]
size_m = [3, 4.5, 3]
voxel_m = 0.03
duration_s = 2.0
# The bowl, the hollow inside it, and the stand.
[[obstacles]]
shape = "cylinder"
position_m = [0, 0.75, 0]
size_m = 0.45
height_m = 0.5
[[obstacles]]
shape = "cylinder"
carve = true
position_m = [0, 0.9, 0]
size_m = 0.38
height_m = 0.5
[[obstacles]]
shape = "cylinder"
position_m = [0, 0.25, 0]
size_m = 0.06
height_m = 0.5
# The coals, inside the bowl.
[[emitters]]
shape = "disc"
position_m = [0, 0.8, 0]
size_m = 0.3
thickness_m = 0.04
start_s = 0.0
end_s = 1000
fuel = 4
temperature_k = 1250
smoke = 0.3
velocity_mps = 0.6
direction = "up"
spread_deg = 30
jitter = 0.6
[solver]
air_limit = 0.85
burn_rate = 10
flame_k = 1700
cooling = 2.5
soot = 0.5
smoke_fade = 3.0
drag = 1.5
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.2
[look]
flame_ramp = [[600, 0.05, 0.0, 0.0], [900, 0.4, 0.03, 0.0], [1200, 0.9, 0.25, 0.02], [1600, 1.0, 0.6, 0.15]]
exposure = 1.6
smoke_colour = [0.06, 0.035, 0.025]
glow = 1.6
soft_light = 0.5
[export]
loop = true
loop_blend_frames = 12
warmup_s = 2.5
Violet portal swirl
An upright ring of violet flame swirled about its center by a vortex, for a portal or a summoning circle. Loop, 6 x 6 m, 2 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A standing ring of violet flame that swirls about its centre, for a portal or a summoning circle.
# The ring emitter is stood upright to face the camera, a vortex turns the gas around it and a pull at
# the centre keeps it from drifting off. Low buoyancy keeps it in place. Loops.
[meta]
name = "violet_portal_swirl"
notes = "Upright ring of violet flame swirled by a vortex, looping"
[domain]
size_m = [6, 6, 4]
voxel_m = 0.04
duration_s = 2.0
# The ring, turned 90 degrees about X so it stands in the plane the front view faces.
[[emitters]]
shape = "ring"
position_m = [0, 2.5, 0]
size_m = 1.4
thickness_m = 0.12
rotation_deg = [90, 0, 0]
start_s = 0.0
end_s = 1000
fuel = 2
temperature_k = 1300
smoke = 0.3
velocity_mps = 0
jitter = 0.4
# The swirl, about the axis through the ring.
[[forces]]
kind = "vortex"
shape = "box"
position_m = [0, 2.5, 0]
size_m = [1.8, 1.8, 0.6]
direction = [0, 0, 1]
strength = 10
max_speed_mps = 3
falloff = 0.4
[[forces]]
kind = "point"
position_m = [0, 2.5, 0]
size_m = 2.0
strength = -4
falloff = 0.5
[solver]
air_limit = 0.8
burn_rate = 6
buoyancy = 0.15
cooling = 2.0
soot = 0.3
smoke_fade = 3.0
drag = 0.8
swirl = 0.9
turbulence = 0.4
turbulence_size_m = 0.3
[look]
flame_ramp = [[700, 0.05, 0.0, 0.1], [1000, 0.3, 0.05, 0.7], [1300, 0.6, 0.3, 1.0], [1700, 0.95, 0.85, 1.0]]
exposure = 2.2
smoke_colour = [0.05, 0.02, 0.07]
glow = 1.2
[[views]]
name = "front"
[[views]]
name = "edge"
yaw_deg = 90
[export]
loop = true
loop_blend_frames = 12
warmup_s = 3.0
Shadow flame
A dark, sooty flame with a deep red ramp and black smoke hanging in a hood above it, held by a drag pocket. Loop, 5 x 7 m, 2 s loop.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A dark, sooty flame for a cursed altar or a villain's lair: a deep red ramp, very black smoke that
# hangs in a hood above the fire where a still pocket slows it, and gusts that make it lick. Loops.
[meta]
name = "shadow_flame"
notes = "Deep red ramp, black hanging smoke held by a drag pocket, looping"
[domain]
size_m = [5, 7, 5]
voxel_m = 0.045
duration_s = 2.0
[[emitters]]
shape = "disc"
position_m = [0, 0.15, 0]
size_m = 0.5
start_s = 0.0
end_s = 1000
fuel = 7
temperature_k = 1400
smoke = 0.8
velocity_mps = 1.2
direction = "up"
spread_deg = 25
jitter = 0.6
# A still pocket above the flame, where the smoke slows and hangs.
[[forces]]
kind = "drag"
shape = "box"
position_m = [0, 4.2, 0]
size_m = [1.6, 0.8, 1.6]
strength = 1.5
falloff = 0.6
[[forces]]
kind = "turbulence"
position_m = [0, 1.5, 0]
size_m = 1.2
strength = 6
noise_size_m = 0.4
acts_on = "gas"
[solver]
air_limit = 0.88
burn_rate = 10
cooling = 2.2
soot = 2.5
smoke_fade = 2.0
drag = 1.2
swirl = 0.8
turbulence = 0.6
turbulence_size_m = 0.4
[look]
flame_ramp = [[700, 0.1, 0.0, 0.0], [1200, 0.5, 0.03, 0.01], [1800, 1.0, 0.25, 0.05]]
exposure = 1.6
smoke_colour = [0.015, 0.01, 0.012]
smoke_density = 1.6
glow = 0.3
[export]
loop = true
loop_blend_frames = 12
warmup_s = 3.0
Spirit wisp trail
A small teal flame weaving on an eased path and leaving a fading trail of gas, not particles. One-shot, 10 x 7 m, 6.5 s.
Export and lighting
Choose a frame count or a frame rate. The Godot pool plays the sheets in order.
Pool wire option --set foot_fade_m=0
Capture preset light=high_sun
If the simulation box is too large, Spatial Compiler refuses the compile with BOX_TOO_BIG_FOR_DEVICE and names the key to change, such as domain.voxel_m. Export settings
# A glowing teal wisp weaving through the air and leaving a fading trail, for a guiding spirit or a
# magic missile. It is a small moving flame on an eased path, with a teal ramp; the trail is the gas
# it leaves behind, not particles. One-shot.
[meta]
name = "spirit_wisp_trail"
notes = "Small teal flame on a curved eased path, leaving a trail"
[domain]
size_m = [10, 7, 8]
voxel_m = 0.06
duration_s = 6.5
[[emitters]]
shape = "sphere"
position_m = [[0, -4, 1, 0], [1, -2, 2.2, 1.2], [2, 0, 1.6, -1], [3, 2, 2.6, 0.8], [4, 4, 2, 0]]
size_m = 0.18
start_s = 0.0
end_s = 4.0
fuel = 1.5
temperature_k = 1500
smoke = 0.4
velocity_mps = 0.3
inherit_velocity = 0.2
lumpiness = 0.2
[solver]
air_limit = 0.5
burn_rate = 6
buoyancy = 0.2
cooling = 2.0
soot = 0.2
smoke_fade = 2.0
drag = 0.8
swirl = 0.9
turbulence = 0.3
turbulence_size_m = 0.25
[look]
flame_ramp = [[700, 0.0, 0.05, 0.05], [1000, 0.02, 0.35, 0.3], [1400, 0.2, 0.85, 0.7], [1800, 0.8, 1.0, 0.95]]
exposure = 2.6
smoke_colour = [0.02, 0.06, 0.06]
glow = 1.4
[[views]]
name = "side"
[[views]]
name = "strategy"
pitch_deg = 55
[export]
format = "png16"