meshfx // REPAIR

How to fix non-manifold edges

You fix non-manifold edges by finding them with the Select Non-Manifold command in your 3D editor, then merging duplicate vertices, deleting interior and stray faces, and filling the holes that remain. A non-manifold edge borders more or fewer than two faces. Recalculate normals afterward and run the selection again until nothing lights up.

pyrofx effects work today, and new accounts start with $5 of usage.

MODULE // meshfx AVAILABLE

meshfx measures faults, checks repairs and makes LODs for a triangle budget. meshfx runs on the hosted API: try it in the Playground.

  • An edge with three or more faces, or only one (a hole)
  • Engines load it, but 3D printing, booleans and collision can break
  • Fix it in your 3D editor before export

01 // HOW TO

Find and fix non-manifold edges by hand

  1. Open the model in your 3D editor, switch to edit mode and deselect everything.
  2. Run Select Non-Manifold. Most 3D editors have it in the Select menu or in a mesh check panel, and it highlights every bad edge and vertex.
  3. Merge by distance with a tiny threshold, about 0.0001 m. Most 3D editors call this Merge by Distance or Weld, and it closes cracks where two vertices sit on the same spot, the most common cause.
  4. Select non-manifold again. An edge with three or more faces usually has an interior wall or a fin face left by an extrude or a boolean cut; delete the extra face.
  5. Where two parts touch at a single vertex (a bowtie), pull them apart or merge them along a full edge.
  6. Fill the open boundaries that remain, as described in how to fill mesh holes.
  7. Recalculate normals outside, run Select Non-Manifold once more, and export when it selects nothing.

meshfx measures holes, flipped faces and non-manifold edges. Each repair is checked against the source and undone with a warning if it moves the surface too far. Hosted meshfx runs are available in the Playground.

02 // WHY IT MATTERS

What non-manifold edges break

Game engines import non-manifold meshes and usually draw them, so the problem shows up later. Smooth shading creases along the bad edge, decimation and convex collision hulls (simplified physics shapes) produce spikes or gaps, and a 3D printing slicer cannot tell the inside of the model from the outside.

Some open edges are fine. A leaf card, a hair strip or a flat ground plane has boundary edges on purpose, so decide whether the part should be closed before you fill it.

04 // FAQ

Non-manifold questions

All questions →

README.FIX_NON_MANIFOLD_EDGES
How do I fix non manifold geometry in a game mesh?

Select the non manifold elements in your 3D editor, merge duplicate vertices, delete interior faces and fill holes. Recalculate normals and repeat the selection until it comes up empty.

What does non manifold geometry mean?

It means the surface could not exist as a real solid: an edge has more than two faces, faces touch at a single vertex or edges border a hole.

How do I repair edges shared by more than two faces?

Delete the extra face. It is usually an interior wall or a duplicated face along that edge; remove it, merge vertices and select non manifold again.

How do I remove internal faces from a 3D model?

Select one face inside the model, extend the selection to the linked interior faces and delete them. Fill any hole that opens in the outer surface afterward.

What are non manifold edges in 3D printing?

They are edges a slicer cannot resolve into a watertight shell, so the print can lose walls or fail to slice. Fix them before exporting the STL.

Does Roblox Studio accept non manifold geometry?

Its 3D Importer can import it, but shading along the bad edges and collision built from the mesh can come out wrong. Fix the edges before import.

Explore meshfx outputs

Inspect compiled meshfx outputs and their reports. Hosted meshfx runs are available in the Playground.

All effects, guides and explainers →